Yamaha Projector Dpx 830 User Manual
Here you can view all the pages of manual Yamaha Projector Dpx 830 User Manual. The Yamaha manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
DPX-830 Digital Cinema Projector Projecteur Cineme Numerique OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES BRUKSANVISNING GEBRUIKSAANWIJZINGYAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADAYAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANYYAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70...
Page 2
i IMPORTANT SAFETY INSTRUCTIONS • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the...
Page 3
ii COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party: Yamaha Electronics Corporation Address: 6660 Orangethorpe Avenue Buena Park, CA90620 Telephone: 714-522-9105 Fax: 714-670-0108 Type of Equipment: Projector Model Name: DPX-830 This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that...
Page 4
iii Caution: Read this before operating this unit. Warning • This unit must be grounded Do not use this projector in a computer room This projector is not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANIS/NFPA 75. Unplug immediately if there is something wrong with your projector Do not operate if smoke, strange noise or odor comes out of the projector. It might cause fire or electric shock. If this happens, unplug...
Page 5
1 1 Getting started 2 Inappropriate places for installation .....................2 Accessory check ..................................................3 Inserting the batteries into the remote control......4 2 Controls and functions 5 Projector overview ...............................................5 Remote control overview .....................................6 Using the picture quality adjusting buttons .....6 3 Using the remote control 7 Operational range...
Page 6
2 ◆Inappropriate places for installation If this unit is not correctly installed in an appropriate place, it may cause fire or failure, or damage the unit itself. Carefully choose the place to install this unit by avoiding the places listed below. 1. Places where the temperature and humidity vary greatly Do not install this unit in a place where the temperature and humidity become extremely high or the temperature becomes extremely low. This unit must be used within a temperature range of 41°F...
Page 7
3 ◆Accessory check The following accessories are provided with this projector. Check to be sure that all of the accessories are packed in the package. Important The supplied power cables are to be used exclusively for this product. Never use them for other products. The power cables for use in the U.S. and Europe are included with this projector. Use the appropriate one for your country. The provided power cable for the U.S. is rated at 120 V. Never connect this cable to any outlet or power supply...
Page 8
4 ◆Inserting the batteries into the remote control 1. Remove the rear lid of the remote control. 2. Check the polarity markings (+, –) of the batteries, and set them correctly, inserting their (–) side first. If the battery is inserted from the (+) side first, inserting the (–) side becomes difficult because the coil spring end hits on the battery side. If the battery is forced to insert in this way, the outer label of the battery may get ripped and cause a short- circuit and heating. 3. Attach the...
Page 9
5 ◆Projector overview 1. FOCUS ring 2. ZOOM ring 3. Control panel 4. Air intake vent 5. Remote control sensor (Front) 6. Air intake vent 7. Air exhaust vent 8. Adjustment foot (Front) 9. Lamp cover (see page 33) 10. Adjustment feet (Rear) 11. Foot adjustment buttons (Left/Right) 12. Air intake vent Control panel1. STANDBY/ON, button 2. AUTO SYNC, button 3. D-SUB/HDMI, button 4. MENU button 5. STATUS indicator 6. POWER indicator 7. KEYSTONE, ENTER button 8. VIDEO/S/COMP., button 9. button...
Page 10
6 ◆Remote control overview 1. IR signal transmitter 2. ON ( I ) button 3. AUTO button 4. NORMAL button 5. HDMI button 6. D-SUB button 7. Cursor buttons ( / / / ) 8. MENU button 9. MEMORY buttons 10. The picture quality adjusting buttons* * See the below for the picture quality adjusting buttons. 11. STANDBY ( ) button 12. HIDE button 13. ASPECT button 14. S. ZOOM (Smart zoom) button 15. SQUEEZ (Squeeze) button 16. VIDEO button 17. COMP. (Component) button 18. S-VIDEO button 19. ENTER button 20. KEYSTN...