Yamaha Msp 5 Service Manual
Have a look at the manual Yamaha Msp 5 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 255 Yamaha manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
110*
20*
279 (11")
30 60
208 (8-3/16")
* Non-skid pad positions.
(For mounting bracket
¢Òå¿Ä;£)
2-M5
DIMENSIONS ¢
GO
$£
Unit: mm](http://img.usermanuals.tech/thumb/83/98860/w64_d_1507898819-yamaha-msp-5-service-manual_d-3.png "Page 4
MSP5 STUDIO
4
179 (7-1/16\")
110*
20*
279 (11\")
30 60
208 (8-3/16\")
* Non-skid pad positions.
(For mounting bracket
¢Òå¿Ä;£)
2-M5
DIMENSIONS ¢
GO
$£
Unit: mm")
![Page 7
MSP5 STUDIO
7
Guide
¢¨ Å£
Cut
¢
~“ˆ£Metal Grille
¢Ý»ç¬æç£
DISASSEMBLY PROCEDURE ¢
ür q£
1. Woofer (Time required: About 1 minute)
1-1 Remove the metal grille. (Fig. 1)
1-2 Remove the four (4) hexagonal socket screws marked
[200]. The woofer can then be removed. (Fig. 1)
Fig. 1](http://img.usermanuals.tech/thumb/83/98860/w64_d_1507898819-yamaha-msp-5-service-manual_d-6.png "Page 7
MSP5 STUDIO
7
Guide
¢¨ Å£
Cut
¢
~“ˆ£Metal Grille
¢Ý»ç¬æç£
DISASSEMBLY PROCEDURE ¢
ür q£
1. Woofer (Time required: About 1 minute)
1-1 Remove the metal grille. (Fig. 1)
1-2 Remove the four (4) hexagonal socket screws marked
[200]. The woofer can then be removed. (Fig. 1)
Fig. 1")
![Page 8
MSP5 STUDIO
8
4. Power Transformer
(Time required: About 3 minutes)
4-1 Remove the rear panel assembly. (See procedure 2)
4-2 Remove the three (3) screws marked [B] and screw
marked [C]. The power transformer can then be removed.
(Fig. 4)
?o](http://img.usermanuals.tech/thumb/83/98860/w64_d_1507898819-yamaha-msp-5-service-manual_d-7.png "Page 8
MSP5 STUDIO
8
4. Power Transformer
(Time required: About 3 minutes)
4-1 Remove the rear panel assembly. (See procedure 2)
4-2 Remove the three (3) screws marked [B] and screw
marked [C]. The power transformer can then be removed.
(Fig. 4)
?o")
![Page 9
MSP5 STUDIO
9
[220A] [220A]
[220B]
[220A] [230], [240] [230]
[220B]
[240]
[220A/B]: Bonding Tapping Screw-B 3x8 (WJ286400) ´Øïß
ï¬#» Ä
[230]: Hexagonal Nut M12 (WJ285500) ´¯Æ¿Ä
[240]: Washer 12x16x0.6 (WJ286200) ´ë¿³ß”
Fig. 7](http://img.usermanuals.tech/thumb/83/98860/w64_d_1507898819-yamaha-msp-5-service-manual_d-8.png "Page 9
MSP5 STUDIO
9
[220A] [220A]
[220B]
[220A] [230], [240] [230]
[220B]
[240]
[220A/B]: Bonding Tapping Screw-B 3x8 (WJ286400) ´Øïß
ï¬#» Ä
[230]: Hexagonal Nut M12 (WJ285500) ´¯Æ¿Ä
[240]: Washer 12x16x0.6 (WJ286200) ´ë¿³ß”
Fig. 7")
![Page 10
MSP5 STUDIO
10
8. Heat Sink (Time required: about 6 minute)
8-1 Remove the rear panel assembly. (See procedure 2)
8-2 Remove the power transformer and the bracket trans.
(See procedure 5-2, 5-3)
8-3 Remove the AMP circuit board. (See procedure 5-4)
8-4 Remove the seven (7) screws marked [I] and screw
marked [J]. The heat sink can then be removed.
(Fig. 10)
* Pull the heat sink lightly away from the rear panel to
remove it.
9. Power Switch
(Time required: About 2 minutes)
9-1 Remove the rear panel...](http://img.usermanuals.tech/thumb/83/98860/w64_d_1507898819-yamaha-msp-5-service-manual_d-9.png "Page 10
MSP5 STUDIO
10
8. Heat Sink (Time required: about 6 minute)
8-1 Remove the rear panel assembly. (See procedure 2)
8-2 Remove the power transformer and the bracket trans.
(See procedure 5-2, 5-3)
8-3 Remove the AMP circuit board. (See procedure 5-4)
8-4 Remove the seven (7) screws marked [I] and screw
marked [J]. The heat sink can then be removed.
(Fig. 10)
* Pull the heat sink lightly away from the rear panel to
remove it.
9. Power Switch
(Time required: About 2 minutes)
9-1 Remove the rear panel...")
SERVICE MANUAL SPECIFICATIONS ¢ ïù“7£..................................................................... 3 DIMENSIONS
MSP5 STUDIO 2 WARNING Components having special characteristics are marked and must be replaced with parts having specification equal to those originally installed.
MSP5 STUDIO 3 SPECIFICATIONS ¢ ïù“7£ * These specifications apply to rated power supplies of 120, 230 and 240 V. \
MSP5 STUDIO 4 179 (7-1/16") 110* 20* 279 (11") 30 60 208 (8-3/16") * Non-skid pad positions. (For mounting bracket ¢Òå¿Ä;£) 2-M5 DIMENSIONS ¢ GO $£ Unit: mm
MSP5 STUDIO 5 3 4 7 5 6 12 PANEL LAYOUT ¢ÍÉçè ž¢Ä£ • Front Panel ¢ÑéïÄÍÉ磕 Rear Panel ¢æžÍÉç£ 1 2 3 4 5 6 7POWER indicator LEVEL control POWER switch AC IN connector LOW TRIM switch HIGH TRIM switch INPUT 1/2 connector1 2 3 4 5 6 7108&3
MSP5 STUDIO 6 CIRCUIT BOARD LAYOUT ¢âÇ¿Äè ž¢Ä£ Power Transformer ¢ ?oÄåïµ£ AMP LED VOLUME INPUT Tweeter ¢À ”»£ Woofer
MSP5 STUDIO 7 Guide ¢¨ Å£ Cut ¢ ~“ˆ£Metal Grille ¢Ý»ç¬æç£ DISASSEMBLY PROCEDURE ¢ ür q£ 1. Woofer (Time required: About 1 minute) 1-1 Remove the metal grille. (Fig. 1) 1-2 Remove the four (4) hexagonal socket screws marked [200]. The woofer can then be removed. (Fig. 1) Fig. 1
MSP5 STUDIO 8 4. Power Transformer (Time required: About 3 minutes) 4-1 Remove the rear panel assembly. (See procedure 2) 4-2 Remove the three (3) screws marked [B] and screw marked [C]. The power transformer can then be removed. (Fig. 4) ?o
MSP5 STUDIO 9 [220A] [220A] [220B] [220A] [230], [240] [230] [220B] [240] [220A/B]: Bonding Tapping Screw-B 3x8 (WJ286400) ´Øïß ï¬#» Ä [230]: Hexagonal Nut M12 (WJ285500) ´¯Æ¿Ä [240]: Washer 12x16x0.6 (WJ286200) ´ë¿³ß” Fig. 7
MSP5 STUDIO 10 8. Heat Sink (Time required: about 6 minute) 8-1 Remove the rear panel assembly. (See procedure 2) 8-2 Remove the power transformer and the bracket trans. (See procedure 5-2, 5-3) 8-3 Remove the AMP circuit board. (See procedure 5-4) 8-4 Remove the seven (7) screws marked [I] and screw marked [J]. The heat sink can then be removed. (Fig. 10) * Pull the heat sink lightly away from the rear panel to remove it. 9. Power Switch (Time required: About 2 minutes) 9-1 Remove the rear panel assembly. (See procedure 2) 9-2 Press the claw to remove the power switch. (Fig. 11)