Yamaha Msp 5 Service Manual
Here you can view all the pages of manual Yamaha Msp 5 Service Manual. The Yamaha manuals for Speaker are available online for free. You can easily download all the documents as PDF.
Page 1
SERVICE MANUAL SPECIFICATIONS ¢ ïù“7£..................................................................... 3 DIMENSIONS
Page 2
MSP5 STUDIO 2 WARNING Components having special characteristics are marked and must be replaced with parts having specification equal to those originally installed.
Page 3
![Page 3
MSP5 STUDIO
3
SPECIFICATIONS ¢
ïù“7£
* These specifications apply to rated power supplies of 120,
230 and 240 V. \](http://img.usermanuals.tech/thumb/83/98860/w300_d_1507898819-yamaha-msp-5-service-manual_d-2.png "Page 3
MSP5 STUDIO
3
SPECIFICATIONS ¢
ïù“7£
* These specifications apply to rated power supplies of 120,
230 and 240 V. \")
MSP5 STUDIO 3 SPECIFICATIONS ¢ ïù“7£ * These specifications apply to rated power supplies of 120, 230 and 240 V. \
Page 4
MSP5 STUDIO 4 179 (7-1/16") 110* 20* 279 (11") 30 60 208 (8-3/16") * Non-skid pad positions. (For mounting bracket ¢Òå¿Ä;£) 2-M5 DIMENSIONS ¢ GO $£ Unit: mm
Page 5
MSP5 STUDIO 5 3 4 7 5 6 12 PANEL LAYOUT ¢ÍÉçè ž¢Ä£ • Front Panel ¢ÑéïÄÍÉ磕 Rear Panel ¢æžÍÉç£ 1 2 3 4 5 6 7POWER indicator LEVEL control POWER switch AC IN connector LOW TRIM switch HIGH TRIM switch INPUT 1/2 connector1 2 3 4 5 6 7108&3
Page 6
MSP5 STUDIO 6 CIRCUIT BOARD LAYOUT ¢âÇ¿Äè ž¢Ä£ Power Transformer ¢ ?oÄåïµ£ AMP LED VOLUME INPUT Tweeter ¢À ”»£ Woofer
Page 7
![Page 7
MSP5 STUDIO
7
Guide
¢¨ Å£
Cut
¢
~“ˆ£Metal Grille
¢Ý»ç¬æç£
DISASSEMBLY PROCEDURE ¢
ür q£
1. Woofer (Time required: About 1 minute)
1-1 Remove the metal grille. (Fig. 1)
1-2 Remove the four (4) hexagonal socket screws marked
[200]. The woofer can then be removed. (Fig. 1)
Fig. 1](http://img.usermanuals.tech/thumb/83/98860/w300_d_1507898819-yamaha-msp-5-service-manual_d-6.png "Page 7
MSP5 STUDIO
7
Guide
¢¨ Å£
Cut
¢
~“ˆ£Metal Grille
¢Ý»ç¬æç£
DISASSEMBLY PROCEDURE ¢
ür q£
1. Woofer (Time required: About 1 minute)
1-1 Remove the metal grille. (Fig. 1)
1-2 Remove the four (4) hexagonal socket screws marked
[200]. The woofer can then be removed. (Fig. 1)
Fig. 1")
MSP5 STUDIO 7 Guide ¢¨ Å£ Cut ¢ ~“ˆ£Metal Grille ¢Ý»ç¬æç£ DISASSEMBLY PROCEDURE ¢ ür q£ 1. Woofer (Time required: About 1 minute) 1-1 Remove the metal grille. (Fig. 1) 1-2 Remove the four (4) hexagonal socket screws marked [200]. The woofer can then be removed. (Fig. 1) Fig. 1
Page 8
![Page 8
MSP5 STUDIO
8
4. Power Transformer
(Time required: About 3 minutes)
4-1 Remove the rear panel assembly. (See procedure 2)
4-2 Remove the three (3) screws marked [B] and screw
marked [C]. The power transformer can then be removed.
(Fig. 4)
?o](http://img.usermanuals.tech/thumb/83/98860/w300_d_1507898819-yamaha-msp-5-service-manual_d-7.png "Page 8
MSP5 STUDIO
8
4. Power Transformer
(Time required: About 3 minutes)
4-1 Remove the rear panel assembly. (See procedure 2)
4-2 Remove the three (3) screws marked [B] and screw
marked [C]. The power transformer can then be removed.
(Fig. 4)
?o")
MSP5 STUDIO 8 4. Power Transformer (Time required: About 3 minutes) 4-1 Remove the rear panel assembly. (See procedure 2) 4-2 Remove the three (3) screws marked [B] and screw marked [C]. The power transformer can then be removed. (Fig. 4) ?o
Page 9
![Page 9
MSP5 STUDIO
9
[220A] [220A]
[220B]
[220A] [230], [240] [230]
[220B]
[240]
[220A/B]: Bonding Tapping Screw-B 3x8 (WJ286400) ´Øïß
ï¬#» Ä
[230]: Hexagonal Nut M12 (WJ285500) ´¯Æ¿Ä
[240]: Washer 12x16x0.6 (WJ286200) ´ë¿³ß”
Fig. 7](http://img.usermanuals.tech/thumb/83/98860/w300_d_1507898819-yamaha-msp-5-service-manual_d-8.png "Page 9
MSP5 STUDIO
9
[220A] [220A]
[220B]
[220A] [230], [240] [230]
[220B]
[240]
[220A/B]: Bonding Tapping Screw-B 3x8 (WJ286400) ´Øïß
ï¬#» Ä
[230]: Hexagonal Nut M12 (WJ285500) ´¯Æ¿Ä
[240]: Washer 12x16x0.6 (WJ286200) ´ë¿³ß”
Fig. 7")
MSP5 STUDIO 9 [220A] [220A] [220B] [220A] [230], [240] [230] [220B] [240] [220A/B]: Bonding Tapping Screw-B 3x8 (WJ286400) ´Øïß ï¬#» Ä [230]: Hexagonal Nut M12 (WJ285500) ´¯Æ¿Ä [240]: Washer 12x16x0.6 (WJ286200) ´ë¿³ß” Fig. 7
Page 10
![Page 10
MSP5 STUDIO
10
8. Heat Sink (Time required: about 6 minute)
8-1 Remove the rear panel assembly. (See procedure 2)
8-2 Remove the power transformer and the bracket trans.
(See procedure 5-2, 5-3)
8-3 Remove the AMP circuit board. (See procedure 5-4)
8-4 Remove the seven (7) screws marked [I] and screw
marked [J]. The heat sink can then be removed.
(Fig. 10)
* Pull the heat sink lightly away from the rear panel to
remove it.
9. Power Switch
(Time required: About 2 minutes)
9-1 Remove the rear panel...](http://img.usermanuals.tech/thumb/83/98860/w300_d_1507898819-yamaha-msp-5-service-manual_d-9.png "Page 10
MSP5 STUDIO
10
8. Heat Sink (Time required: about 6 minute)
8-1 Remove the rear panel assembly. (See procedure 2)
8-2 Remove the power transformer and the bracket trans.
(See procedure 5-2, 5-3)
8-3 Remove the AMP circuit board. (See procedure 5-4)
8-4 Remove the seven (7) screws marked [I] and screw
marked [J]. The heat sink can then be removed.
(Fig. 10)
* Pull the heat sink lightly away from the rear panel to
remove it.
9. Power Switch
(Time required: About 2 minutes)
9-1 Remove the rear panel...")
MSP5 STUDIO 10 8. Heat Sink (Time required: about 6 minute) 8-1 Remove the rear panel assembly. (See procedure 2) 8-2 Remove the power transformer and the bracket trans. (See procedure 5-2, 5-3) 8-3 Remove the AMP circuit board. (See procedure 5-4) 8-4 Remove the seven (7) screws marked [I] and screw marked [J]. The heat sink can then be removed. (Fig. 10) * Pull the heat sink lightly away from the rear panel to remove it. 9. Power Switch (Time required: About 2 minutes) 9-1 Remove the rear panel...