Yamaha Dpx 1200 User Manual

							37
Menu
7

Reset the selected parameter to the default setting.
VIDEOESC : Return
Image
Memory 1 Signal Initial SetupMove Menu Window
Menu operations
VIDEO
Image
Memory 4 Signal Initial SetupMove Menu Window
Press        to reset 
to factory settings.
ESC : Return
1. Select the item you wish to reset to the default setting
from the main menu.
2. Press the RESET button on the remote control to reset
to the default settings (resetting does not affect items
with no default setting).
Memo
•The RESET button has a special function when selecting
[WRGBYCM] in [Color Adjustment]. ( page 27)
•The RESET button resets the parameters to their default
settings (corresponding to the signal input: HDTV or SDTV)
when the Color coordinate adjustment area is selected after
selecting  [WRGB] or [WRGBYCM] in [Color Adjustment]. (
page 27)
1. From the menu screen, select [Initial]  [Reset]
 [All Settings].

Reset all parameters to their default settings.
VIDEO+ : Enter
ResetAll Settings
All Memory
Current Memory Image
Memory 4 Signal Initial SetupMove Menu Window
2. Press the + button to display a confirmation message.
3. Press the 
 button to reset to the default settings.
Memo
•To cancel this operation and return to the previous screen,
press the ESCAPE button.

Change the position of the menu on the screen.
1. In the menu screen, press the ESCAPE or h button
and move the cursor to one of the menu groups.
2. Press the h button to enter [Move Menu Window].
3. Use the h, g, +, or - button to move the menu screen to
a location of your choice.
4. Press the ESCAPE button to return to the previous
menu screen.
13_DPX-1100_E.p6511/26/04, 1:54 PM 37 
						

							38 
Reset the [Lamp Running Time] displayed on screen to “0”.
VIDEO
Special Image Signal Initial SetupMove Menu Window
Memory 1 Cinema Zoom
Cinema Squeeze
14:9 ZoomSubtitle Zoom
+ : Enter
Menu operations

Use the [Subtitle Area] menu to adjust the size of the subtitle display area. Use [V Scroll] to adjust the vertical position of the subtitle display.
1.  From the menu screen, select [Signal] 
 [Display
Aspect Ratio] 
 [Special].
2.  Press the + button to enter the lower level selection
menu.
3.  Select [Subtitle Zoom] with h or g buttons.
4.  Press the 
 button.
“
” appears to the right of [Subtitle zoom].
Memo
•After the first time you carry out this procedure, “” appears
beside [Subtitle Zoom] automatically.
1. From the menu screen, select [Initial]  [Lamp
Running Time].
: Fix
NoYe s
VIDEO
Image
Memory 4 Signal Initial SetupMove Menu Window
Lamp Running Time 12 HoursPress          to reset lamp running time.
Color System
VIDEO
INPUT A SignalINPUT A Sync TypeINPUT B SignalINPUT B Sync Type
Auto Power Off
+ : Enter
Auto Input SearchDisplay Language
Reset
AutoComponentAutoRGB TVAutoHDMI SignalComponent
EnglishLamp Running Time12 Hours
On OffOffOn Image
Memory 1 Signal Initial SetupMove Menu Window
2. Press the + button to open the confirmation screen.
3. Press the h or g button to select [Yes].
4. Press the 
 button to confirm.
Memo
•To cancel the operation and return to the menu screen, select
[No].
13_DPX-1100_E.p6511/26/04, 1:54 PM 38 
						

							39
Menu
7
5. Press the + button to enter the lower level selection
menu.
6. Press h or g button to select [Subtitle Area] or [V
Scroll].
7. Press the + or – button to select a suitable setting.
Memo
•Press the h or g button to move to a different menu item in
the [Subtitle Zoom] menu.
8. Press the ESCAPE button to return to the higher level
selection menu.
VIDEO
Image Signal Initial SetupMove Menu Window
Memory 1
ESC : Return
Subtitle AreaV Scroll0
0
Subtitle Zoom
Menu operations
Press the  button
1. From the menu screen, select [Image]  [Gamma].
2. Press the 
 button to switch between capital (A to E)
and non capital (a to e) letters.
3. Use the + or – button to select an appropriate setting.

Select a gamma control pattern (color tone characteristics) from the 10 preset patterns. ( page 25)
Image
Black Level
OffLMLMHH
ABCDE
Memory 1VIDEO 0
White Level 0GammaHue 0Saturation 100Sharpness TypeSharpness GainColor Adjustment
Level AdjustmentIris
SignalInitialSetup
4
White PeakingMove Menu WindowWRGB
06500K +
0.000uv-
a
: ExchangeA
Image
Black Level
OffLMLMHH
abcde
Memory 1VIDEO 0
White Level 0GammaHue 0Saturation 100Sharpness TypeSharpness GainColor Adjustment
Level AdjustmentIris
SignalInitialSetup
4
White PeakingMove Menu WindowWRGB
06500K +
0.000uv-
Aa
: Exchange
13_DPX-1100_E.p6511/26/04, 1:54 PM 39 
						

							40

 Adjusting image quality using the inline menu
Use the inline menu to adjust image quality without obstructing the image during projection. See “Menu group items and functions” (page 25
to 31) for information on each setting.

Black Level
Inline menu item
Indicates that you can use the h and g buttons to
change the position of the inline menu.
Press the + or - button to set the item to an appropriate setting.
Press the RESET button to return the item to its default setting.

1. Press the  button when the menu is not open.
Image menu items appear one at a time in the lower area of the screen. If you do not carry out any operations within 5 seconds, the menu
disappears.
Press the h or g button to select an item to set.
2. To close the menu when you have finished making adjustments, press the ESCAPE button.
Memo
•Press the  button to change between the pages of the [Gamma] menu.
Black Level
Sharpness TypeOffLMLMHH
Sharpness TypeOffLMLMH H
Parameter adjustment area

The menu items available may differ depending on the input signal type.
Memo
•When [Sharpness Type] is set to [Off], the [Sharpness Gain] adjustment cannot be performed.
Black Level
White Level
Gamma
Hue
Saturation
Color Temp.
White CorrectionSharpness Type
Sharpness Gain
White Peaking
Iris
For video type sources
Brightness
Contrast
Gamma
Color Temp.
White Correction
White Peaking
Iris
For PC type sources
Menu operations
13_DPX-1100_E.p6511/26/04, 1:54 PM 40 
						

							41
Memory function
8
The memory function automatically saves the settings of menu items listed in the “Items to be saved” table below.

 Memory configurations
The DPX-1200 stores up to six sets of configurations, called memory numbers, for each input jack.  For each memory number, the DPX-
1200 stores specific configurations for each signal type, giving a total of 72 configurations.

 Recalling a memory number


 Saving memory settings
All memory numbers have default settings. Since the DPX-1200 saves any changes in the menu item to the current memory number, you do
not need to save the settings each time. To preserve the specific settings, use the “Memory lock” function ( See page 43).

1. Select the [Image] or [Signal]
group from the menu screen.
STANDBY/ON
SETTING
LAMP COVER TEMP FAN PATTERN
ESCAPE MENU
INPUT ASPECTPATT IRIS AUTOSETTINGZOOM FOCUS V. POS
INPUT
MENU
ASPECT
ESCAPE
Remote Control Main Unit
MENU Button
1. Press the MEMORY button (in the
MEMORY area) of which you want
to recall the settings.
Remote Control
456 123
VIDEO STILL
LIGHT
BD4S VIDEOA
INPUT
MEMORY
DVI
MEMORY area
Memory configurations for each input jack Items to be saved
Image
Black Level (Brightness)
White Level (Contrast)
Gamma
Hue
Saturation
Color Temp.
White Correction
Sharpness Type
Sharpness Gain
Color Adjustment
White Peaking
Iris
Level Adjustment
Signal
3D Y/C  Separation
Noise Reduction
Video Type
Progressive Mode
Color Space Conversion
Setup Level
Signal Level
Input Signal TypeInput
VIDEO
S VIDEO
INPUT A
INPUT B
HDMI
D4
Total
The Number of Memories
–
–
SDTV
HDTV
RGB-PC
SDTV
HDTV
RGB-PC
SDTV
HDTV
SDTV
HDTV
6
6
6
6
6
6
6
6
6
6
6
6
72
8
Memory function
(Save, Recall, Lock, Copy, Reset)
13_DPX-1100_E.p6511/26/04, 1:54 PM 41 
						

							42
OffLMLMHH
abcde
Memory 1VIDEO 0
0
0100
WRGB 4
+ : EnterImage Signal Initial SetupMove Menu Window
Black Level
White Level
Gamma Trim
Hue
Saturation
Sharpness Type
Sharpness Gain
Level Adjustment Iris Color Adjustment
White Peaking
0
6500K +
0.000uv-
2. Press the g button to select
“Memory number status” from the
bottom of the screen.
3. Press the + button to open the
submenu.
Remote Control Main Unitor
5. Press the  button to recall the
settings in the selected memory. 4. Press the h or g button to select
a memory number.
Remote Control Main Unitor
Remote Control Main Unitor
Remote Control
Main Unit or
Memo
•When the unit receives a signal with a different resolution from the same input jack,
it detects the new resolution and recalls an appropriate memory settings.
Memory 6VIDEOMemory 5Memory 4Memory 3Memory 2Memory 1
: Fix
Image Signal Initial SetupMove Menu Window
Memory number status
13_DPX-1100_E.p6511/26/04, 1:54 PM 42 
						

							43
Memory function
8 
 Memory lock
The lock function protects information in a memory not to be overwritten. You can set the lock function for each memory number, and
additionally for each SDTV/HDTV/RGB-PC input.

1. Recall the memory number you
wish to lock.
2. Select a memory number status.
3. Press the 
 button.
“
” appears beside locked memory
numbers.
Remote Control Main Unitor
OffLMLMHH
abcde
Memory 1VIDEO 0
0
0100
WRGB 4
Image Signal Initial SetupMove Menu Window
Black Level
White Level
Gamma Trim
Hue
Saturation
Sharpness Type
Sharpness Gain
Level Adjustment Iris Color Adjustment
White Peaking
0
6500K +
0.000uv-
1. Select the memory number you
wish to unlock.
2. Select a memory number status.
3. Press the 
 button.
“
” disappears from the memory status
screen and the memory lock is removed
from the memory number you selected.
Remote Control Main Unitor
OffLMLMHH
abcde
Memory 1VIDEO 0
0
0100
WRGB 4
+ : EnterImage Signal Initial SetupMove Menu Window
Black Level
White Level
Gamma Trim
Hue
Saturation
Sharpness Type
Sharpness Gain
Level Adjustment Iris Color Adjustment
White Peaking
0
6500K +
0.000uv-

Memo
•You can change settings when the memory is locked, but the unit does not save the changes to a memory. Any changes you make
are erased when you place this unit to standby mode. (The memory number status color changes from white to gray if you change
any menu items while the memory is locked.)
 disappears
 appears
13_DPX-1100_E.p6511/26/04, 1:54 PM 43 
						

							44
1. Recall the memory number to be
the copy source.

 Memory copy
Copy the settings stored in a memory number to another memory number.
OffLMLMHH
abcde
Memory 1VIDEO 0
0
0100
WRGB 4
+ : EnterImage Signal Initial SetupMove Menu Window
Black Level
White Level
Gamma Trim
Hue
Saturation
Sharpness Type
Sharpness Gain
Level Adjustment Iris Color Adjustment
White Peaking
0
6500K +
0.000uv-
2. Press the g button to select
“Memory number status” from the
bottom of the screen.
Remote Control Main Unitor
Memory number status
3. Press the + button to open the
submenu.
Remote Control Main Unitor
Memory 6VIDEOMemory 5Memory 4Memory 3Memory 2Memory 1
: Fix
Image Signal Initial SetupMove Menu Window
4. Press the h or g button to select
a memory number to be the copy
destination.
•You cannot select a source memory
number (gray colored) as a copy
destination.
•You cannot select a locked memory
number (marked “
”) as a copy
destination. Remote ControlMain Unit or
Memory 6VIDEOMemory 5Memory 4Memory 3Memory 2Memory 1
: Fix
Image Signal Initial SetupMove Menu Window
: Copy
Memo
13_DPX-1100_E.p6511/26/04, 1:54 PM 44 
						

							45
Memory function
8
5. Press the + button to display the
confirmation screen.
Remote ControlMain Unit or
Memory 6VIDEOMemory 5Memory 4Memory 3Memory 2Memory 1
: Fix
Image Signal Initial SetupMove Menu Window
Copy the Memory?
Press to confirm.
Ye sNo
6. Press the h or g button to select
[Yes] .
Remote ControlMain Unit or
Memory 1VIDEO: Fix
Image Signal Initial SetupMove Menu Window
Copying to Memory 3 ...7. Press the  button.
The settings stored in the source memory
number are copied to the destination
memory number.
If the copy is complete, the memory status
screen dislplays the memory number
selected in step 1.
Remote ControlMain Unit or
13_DPX-1100_E.p6511/26/04, 1:54 PM 45 
						

							46
VIDEO
Image
Memory 4 Signal Initial SetupMove Menu Window
ESC : ReturnPress        to reset current memory.
1. From the main menu, select
[Initial] 
 [Reset]  [Current
Memory].
VIDEO+ : Enter
ResetAll Settings
All Memory
Current Memory Image
Memory 4 Signal Initial SetupMove Menu Window
2. Press the + button to display the
confirmation screen.
3. Press the 
 button to reset the
parameters to their default
settings.
Remote Control Main Unitor
Remote Control Main Unitor

 Resetting to the default settings
Reset parameters stored in memories to default settings.

Follow the procedure below to return parameters stored in the selected memory (corresponding to the signal input from the currently selected
input jack) to their default settings.
13_DPX-1100_E.p6511/26/04, 1:54 PM 46