Home > Yamaha > Projector > Yamaha Dpx 1000 User Manual

Yamaha Dpx 1000 User Manual

Here you can view all the pages of manual Yamaha Dpx 1000 User Manual. The Yamaha manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 21

E-16
hg
hg
hg
hg
hg
hg
hg
hg
hg
hg
hg
hg
hg
hghghghghg
hghghghg
hghghg
hghg
hg
hghg
hg hg
hg hg
hg hg
hg hg
hg hg
hg hg
hg hg
hg hg
hg hg
hg hg
hg hg
hg hg
hghghg
Move Menu Window
Image
Black Level
OffLMLMHH
ABCDE
Memory 1VIDEO 0
White Level 0
Gamma Trim
Hue 0
Saturation 100
Color Temp.
Sharpness Type
Sharpness Gain
Level adjustment
Iris
Color Balance16
SignalInitialSetup
6000K  +
–0.000uv
Standard
hgStandardCinema
Location
Keystone
Remote Control Sensor
Remote Control ID
Lens Adjustment  Lock
White...

Page 22

E-17
MENU
English
Menu Item
BLACK LEVEL
Adjusts the level of blackness in an image while maintaining peak white brightness. Increasing
the black level will increase the luminosity of dark scenes and clarify picture tone, however it
will also lower the contrast. Reducing the black level will increase the contrast in dark scenes
but will reduce the clarity of black tones.
WHITE LEVEL (*CONTRAST)
Increases the level of whiteness in an image without changing the luminosity of the darker parts
of the image....

Page 23

E-18
Adjustment range
OFF/L/ML/MH/H
0 to 16 to 63
STANDARD/RGB/
RGBYCM
–50 to 0 to +50
STANDARD/CINEMA Input signalVideo/Component,
RGB TV
Video/Component,
RGB TV
Video/Component,
RGB TV, RGB PC
Component,
RGB TV, RGB PC
Video/Component,
RGB TV, RGB PCMenu ItemSHARPNESS TYPE
Use this parameter to change the filtering characteristics of the circuitry used to sharpen edges
in the projected image.
SHARPNESS GAIN
Adjusts the clearness of the image edges. The higher value creates clearer edges. The lower...

Page 24

E-19
MENU
English
Menu structure
Selections
AUTO/NORMAL/
SQUEEZE/SMART
ZOOM/ZOOM/
SUBTITLE ZOOM 
S(SUBTITLE AREA,V. SCROLL) THROUGH/
THROUGH SQUEEZE
0 to 3 to 10
–10 to 4 to +10
OFF/ON
OFF/1/2/3
DVD/VCR
AUTO/VIDEO
AUTO/SDTV/HDTV
0%/7.5%
0%/7.5%
16–235/0–255
–128 to 0 to +127
0 to 16 to 31
–50 to 0 to +50
–50 to 0 to +50 Input signal
Video/Component,
RGB TV, RGB PC
Video(NTSC)
Video/Component,
RGB TV
Video
Video/Component,
RGB TV
Video/Component,
Video/Component,
RGB TV
Video/Component,
RGB TV
RGB TV
*RGB...

Page 25

E-20
Menu structure
3 
     INPUT A    INPUT B    D4 VIDEO    S VIDEO    VIDEO    DVI
Menu item
COLOR SYSTEM SSelects the color system to use when the input signal is from a video source. Available selections are
NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, and SECAM. Usually, setting the unit to AUTO will
result in the unit automatically selecting the appropriate color method. However, since the unit does not
automatically detect NTSC
4.43 under AUTO mode, set the color method to NTSC4.43 manually to...

Page 26

E-21
MENU
English
Menu structure
4 
Selections
FRONT/TABLE, FRONT/CEILING, REAR/
TABLE, REAR/CEILING
–100 to 0 to +100
FRONT&REAR/FRONT/REAR/OFF
ID 1/ID 2
OFF/ON
OFF/ON
OFF/ON
MONOTONE/COLOR
OFF/ON
LAMP/FAN/RS-232C
9600bps/19200bps/38400bps/57600bps/
115200bps Increase the value in the positive (+) direction
When the upper part of the image is wider than the lower When the lower part of the image is wider than the top
Decrease the value in a negative (–) direction Menu item
LOCATION SThere are four ways...

Page 27

E-22
hg
hg
hg
hghg
hg
hg
hghghghghghghg
hghghghghghghghghghghghghghghg
hghg hg
hg hghg hghg hghg hghg hghg hghg hghg hghg hghg hghg hghg hg
hghghgMove Menu Window
Image
Display Aspect
Memory 1VIDEO
3D Y/C SeparationNoise ReductionVideo TypeProgressive ModeColor Space Conversion
+: Enter
InitialSetup
Setup Level (SDTV)
Signal Status
OffOn
DVDVCR
Auto
Video Auto
0%7.5%Setup Level (HDTV)0%7.5%
123
AutoSDTVHDTV Off Signal
AutoNormalSqueezeSmart ZoomZoomSubtitle ZoomThroughThrough Squeeze
Display Aspect

Menu...

Page 28

E-23
MENU
English
Menu operation
Basic menu operation
To ensure proper projection, start with setting and adjustment in menu group “SETUP”.
45
RESET
6 123
VIDEO STILL HIDE
INPUTASPECT
LIGHT
BD4
S VIDEOAINPUT
MEMORYDVI
INPUT PATT IRIS AUTO
SETTING
ASPECTZOOM FOCUS V. POS
ESCAPEMENU1, 6
5
3, 5
2, 44
STANDBY/ON
SETTING
LAMP COVER TEMP FAN PATTERN
ESCAPEMENU
INPUT ASPECT1, 6
2, 4 3, 55
1.Press MENU to open the menu.
The previous menu screen opens if menu operations have
already been performed.
2.Press + or...

Page 29

E-24
Some items are adjusted by increasing or decreasing the value on
the scale, and others by selecting a number or a word.
Press the RESET button to reset the parameter to the factory
setting. (Items without a factory setting cannot be reset.)
5.Press h or g to move the cursor to the next item.
To set a menu item in another menu group, press the ESCAPE
or h button to return to the presently selected menu group, and
follow steps 2—4 described previously to continue with menu
setting.
6.Press MENU to...

Page 30

E-25
MENU
English
3.Select the submenu parameter by pressing h or g.
Press the RESET button to reset the parameter to the factory
setting. (Items without a factory setting cannot be reset.)
The following step is necessary to set “COLOR SYSTEM”,
“INPUT A SIGNAL”, “INPUT B SIGNAL”, “DVI SIGNAL”
and “REMOTE CONTROL SENSOR” in operation group B.
[Operation group B only]
Press  when setting is complete. This will confirm the new
setting close the submenu. Settings for the above items will not
be changed if...
Start reading Yamaha Dpx 1000 User Manual

Related Manuals for Yamaha Dpx 1000 User Manual

All Yamaha manuals