Yamaha Dpx 1000 User Manual

DPX–1000
Digital Cinema Projector
U
OWNER’S MANUAL 

• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
you to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert you to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance....

FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void
your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded
cables. Cable/s supplied with this product MUST be used.
Follow all installation...

Caution: Read this before operating this unit.
I
• To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Installation
• Install this unit in a well-ventilated, cool, dry, clean place with
at least 30 cm (1 feet) clearance on the top, right and left, and
at the back of this unit — away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold.
• Locate this unit away from other electrical appliances, motors,
or transformers to...

English
If this unit is not correctly installed in an appropriate place, it may cause fire or failure, or damage the unit itself. Carefully choose the place
to install this unit by avoiding the places listed below.
1.Places where the temperature and humidity vary greatly
• Do not install this unit in a place where the temperature and humidity become extremely high or the temperature becomes extremely
low.
• This unit must be used within a temperature range of 5—35°C.
2.Places without adequate...

E-1
INTRODUCTION
INSTALLATION
CONNECTIONS
BASIC OPERATION
MENU
ADDITIONAL
INFORMATION
English
ENGLISH
Features
Contents
• Bright, high contrast images achieved through
DLP™ technology
• HDTV capable 1280 x 720 pixel wide DMD™
element
• A bright, high resolution large diameter lens
• Electronic lens adjustment
— Zoom, Focus, Vertical Position, Optical Iris
Diaphragm —
(DLP™ and DMD™ are trademarks of Texas Instruments.)
• Low operating noise made possible by Yamaha
sound technology
• High quality...

E-2
Part Names and Functions
1STANDBY/ON indicator
2STANDBY/ON button
Switches the unit between Standby and On (operational)
modes.
3ESCAPE button
Use this button to exit from submenu mode.
4PATTERN button
Switches the built-in test pattern display on and off.
5ASPECT button
Selects the display aspect of the projection image. Press the
button to display the aspect presently being used. Pressing the
button again within 2 seconds will switch the unit to the next
aspect mode.
6LAMP warning indicator
7COVER...

E-3
INTRODUCTION
English
DVIINPUT B
RGB/YP
BPR/YCBCRD4 VIDEOG/YB/PB/CBR/PR/CR
INPUT A
HD/SYNCVD
OUT IN
REMOTERS-232C
S-VIDEO VIDEOTRIGGER OUT
q
1234567 809wer
DVIINPUT B
RGB/YPBPR/YCBCRD4 VIDEOG/YB/PB/CBR/PR/CRINPUT AHD/SYNCVD
OUT IN
REMOTERS-232C
S-VIDEO VIDEOTRIGGER OUT
1INPUT B (D-Sub 15 pin)
This is the input connector for signals (RGB/YPBPR/YCBCR)
from a component video or RGB source. Use a D-Sub monitor
cable when connecting another component to the DPX-1000
through this connector.
2D4 VIDEO (D...

E-4
Part Names and Functions

Remote control
Buttons with identical names to those on the main unit perform
identical functions. To use the remote, point it at the remote control
sensor on the front or back of the unit from a distance of no more
than 7 m (23 feet).
1Transmit indicator
This indicator will light up when the unit is sending infra-red
signals to the main unit.
2AUTO button
Pressing this button will automatically adjust the unit to the
best settings for projection by retuning the frequency of...

E-5
INTRODUCTION
English
Part Names and Functions
Important
•Bright light, fluorescent light etc. on the remote sensor on the main unit may inhibit the normal functioning of the remote control.
•The remote may not function normally if there is an obstacle blocking the signal between the remote and the remote control sensor
on the main unit.
•The above are approximate figures.

Using the remote control
Use the remote control under the following conditions. The remote control will not function if it is...