Home > Yamaha > Receiver > Yamaha Av1 Service Manual

Yamaha Av1 Service Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Yamaha Av1 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 255 Yamaha manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 157
    Add page 31 to Favourites
    image text
    Enable zoom 
    							En
31
Connect a TV to this unit so that videos input to this unit can be output to the TV.
You can also enjoy playback of TV audio on this unit.
The connection method varies depending on functions and video input jacks available 
on your TV.
Refer to the instruction manual of the TV and choose a connection method.
■  Connection method 1 (HDMI  Control/ARC-compatible 
TV)Connect the TV to this unit with an HDMI cable. The following explanation is based on the assumption that you have not changed the “HDMI” parameters 
(p.117) in the “Setup” menu.
 HDMI Control is available only on the HDMI OUT 1 jack.
 If you make an HDMI connection between your TV and this unit, any videos input to this unit can be output  to the TV no matter how you connect video devices to this unit. For details, see “Video signal flow” (p.149).
 You can connect another TV or a projector by using the HDMI OUT 2 jack (p.36).
2
Connecting a TV
About HDMI Control
HDMI Control allows you to operate exte rnal devices via HDMI. If you connect a TV 
that supports HDMI Control to this unit with an HDMI cable, you can control this unit 
(power, volume, etc.) in conjunction with TV remote control operations. You can also 
control playback devices (HDMI Cont rol-compatible BD/DVD player, etc.) 
connected to this unit with an HDMI cable. For details, see “HDMI Control” (p.150).
About Audio Return Channel (ARC)
ARC allows audio signals to travel both wa ys under HDMI Control. So if you connect 
a TV that supports HDMI Control and ARC to  this unit with a single HDMI cable, you 
can output video/audio to the TV or input TV audio to this unit.
Does your TV support
Audio Return Channel (ARC)?
Does your TV supportHDMI Control? 
Does your TV have an HDMI input jack?  ■
 Connection method 3 (p.34)
■
 Connection method 2 (p.33)
■
 Connection method 1 (p.31)
■  Connection method 4 (p.35)
Yes
Yes
Yes
No
No
No
FM
75ΩANTENNAAM(4 RADIO)
AV  1(1 BD/DVD)COAXIAL1DOCK
YP
B
OPTICAL
AV OUTAV  O U T /ZONE 4
RL
HDMI OUTARC1 2
(1 
MONITOR OUT/
ZONE OUT
AV  1
AV  1
AV  3 AV  4
AV  2
AUDIO 4
AUDIO 3
AUDIO 2
(3 CD)
AUDIO 1(2 TV)
FRONT
5
OPTICAL4OPTICAL3COAXIAL2
COAXIAL6
SURROUNDR
L
PHONO NETWORK
AAV  2B
GND
HDMI OUTARC12
HDMI
HDMI
HDMI
HDMI OUT 1 jack
HDMI input
(ARC-compatible)
This unit (rear)
TV
1
2TV connection
3
4
5
6
7
8
9
    Add page 32 to Favourites
    image text
    Enable zoom 
    							En
32
❑ 
Necessary settings
To use HDMI Control and ARC, you need to configure the following settings.For details on settings and operations of your  TV, refer to the instruction manual of the TV.1
After connecting external devices (TV, playback devices, etc.) and 
power cable of this unit, turn on this unit, TV and playback devices.
2
Configure the settings of this unit.a Check that ARC is enabled on the TV.
b Switch the TV input to display the video from this unit.
c Press ON SCREEN.
d Use the cursor keys to select “Setup” and press ENTER.
e Use the cursor keys ( / ) to select “HDMI”.
f Use the cursor keys ( / ) to select “HDMI Control” and press ENTER.
g Use the cursor keys to select “On”.
h Press ON SCREEN.
3
Configure the settings for HDMI Control.aEnable HDMI Control on the TV and playback devices (HDMI Control-compatible BD/
DVD player, etc).
b Turn off the main power of the TV and then turn off this unit and playback devices.
c Turn on this unit and playback devices and then turn on the main power of the TV.
d Switch the TV input to display the video from this unit.
e Check the followings.
On this unit:  The input to which the playback device is connected is selected. If not, 
select the input source manually.
On the TV:  The video from the playback device is displayed.
f Check that this unit is properly synchronized with the TV by turning off the TV or 
adjusting the TV volume with the TV remote control.
Now the necessary settings are complete.
If you select a TV program with the TV remote control, the input source of this unit will 
be automatically switched to “AUDIO1” and the TV audio will be played back on this 
unit.
If TV audio cannot be heard, check that “ARC” (p.117) in the “Setup” menu is set to 
“On”. If HDMI Control does not work properly, try turning off and on (or unplugging and re-plugging) the 
devices. It may solve the problem.
 If any audio interruption happens while using ARC, set “ARC” (p.117) in the “Setup” menu to “Off ”  and use an audio cable (digital optical or stereo pin cable) to input TV audio to this unit (p.33).
 “AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the  AUDIO1 jacks, use “TV Audio Input” (p.117) in the “Setup” menu to change the TV audio input 
assignment. To use the SCENE function (p.58), you also need to change the input assignment for 
SCENE(TV).
RETURN
DISPLAY
ENTER
ON SCREEN
OPTION
ON SCREEN
Cursor keys
ENTER
1
2TV connection
3
4
5
6
7
8
9
    Add page 33 to Favourites
    image text
    Enable zoom 
    							En
33
■ Connection method 2 (HDMI Control-compatible TV)Connect the TV to this unit with an HDMI cabl e and an audio cable (digital optical or 
stereo pin cable). The following explanation is based on the assumption that you have not changed the “HDMI” parameters  (p.117) in the “Setup” menu.
 HDMI Control is available only on the HDMI OUT 1 jack.
 If you make an HDMI connection between your TV and this unit, any videos input to this unit can be output  to the TV no matter how you connect video devices to this unit. For details, see “Video signal flow” (p.149).
 You can connect another TV or a projector by using the HDMI OUT 2 jack (p.36).
❑  Necessary settingsTo use HDMI Control, you need to configure the following settings.
For details on settings and operations of your TV, refer to the instruction manual of the 
TV.1
After connecting extern al devices (TV, playback devices, etc.) and 
power cable of this unit, turn on this unit, TV and playback devices.
2
Configure the settings of this unit.a Switch the TV input to display the video from this unit.
b Press ON SCREEN.
c Use the cursor keys to select “Setup” and press ENTER.
d Use the cursor keys ( / ) to select “HDMI”.
e Use the cursor keys ( / ) to select “HDMI Control” and press ENTER.
f Use the cursor keys to select “On”.
g Press ON SCREEN.
FM
75ΩANTENNAAM(4 RADIO)
AV  1(1 BD/DVD)COAXIAL1DOCK
YP
B
OPTICAL
AV OUTAV  O U T /ZONE 4
RL
HDMI OUTARC1 2
(1 
MONITOR OUT/
ZONE OUT
AV  1
AV  1
AV  3 AV  4
AV  2
AUDIO 4
AUDIO 3
AUDIO 2
(3 CD)
AUDIO 1(2 TV)
FRONT
5
OPTICAL4OPTICAL3COAXIAL2
COAXIAL6
SURROUNDR
L
PHONO NETWORK
AAV  2B
GND
HDMI
HDMI OUTARC12
OPTICALAUDIO 1(2 TV)5
AUDIO
OPTICALRL
OOL
R L
R
HDMI
HDMI
This unit (rear) HDMI OUT 1 jack
AUDIO1 (OPTICAL or AUDIO)  jacks Audio output 
(digital optical or analog stereo) TV
HDMI input
RETURN
DISPLAY
ENTER
ON SCREEN
OPTION
ON SCREEN
Cursor keys
ENTER
1
2TV connection
3
4
5
6
7
8
9
    Add page 34 to Favourites
    image text
    Enable zoom 
    							En
34
3
Configure the settings for HDMI Control.aEnable HDMI Control on the TV and playback devices (HDMI Control-compatible BD/
DVD player, etc).
b Turn off the main power of the TV and then turn off this unit and playback devices.
c Turn on this unit and playback devices and then turn on the main power of the TV.
d Switch the TV input to display the video from this unit.
e Check the followings.
On this unit : The input to which the playback device is connected is selected. If not, 
select the input source manually.
On the TV : The video from the playback device is displayed.
f Check that this unit is properly synchronized with the TV by turning off the TV or 
adjusting the TV volume with the TV remote control.
Now the necessary settings are complete.
If you select a TV program with the TV remote control, the input source of this unit will 
be automatically switched to “AUDIO1” and the TV audio will be played back on this 
unit. If HDMI Control does not work properly, try turning off and on (or unplugging and re-plugging) the 
devices. It may solve the problem.
 “AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the  AUDIO1 jacks, use “TV Audio Input” (p.117) in the “Setup” menu to change the TV audio input 
assignment. To use the SCENE function (p.58), you also need to change the input assignment for 
SCENE(TV).
■  Connection method 3 (TV with HDMI input jacks)Connect the TV to this unit with an HDMI cable and an audio cable (digital optical or 
stereo pin cable).
If switch the input source of this unit to “A UDIO1” by pressing AUDIO1 or SCENE(TV), 
the TV audio will be played back on this unit. If you make an HDMI connection between your TV and this unit, any videos input to this unit can be output  to the TV no matter how you connect video devices to this unit. For details, see “Video signal flow” (p.149).
 You can connect another TV or a projector by using the HDMI OUT 2 jack (p.36).
 If you have connected any external device to the AUDIO1 jacks, connect the TV to one of the AUDIO2~4  jacks. To use the SCENE function (p.58), you also need to change the input assignment for SCENE(TV).
FM 75ΩANTENNAAM(4 RADIO)
AV  1(1 BD/DVD)COAXIAL1DOCK
YP
B
OPTICAL
AV OUTAV  O U T /ZONE 4
RL
HDMI OUTARC1 2
(1 
MONITOR OUT/
ZONE OUT
AV  1
AV  1
AV  3 AV  4
AV  2
AUDIO 4
AUDIO 3
AUDIO 2
(3 CD)
AUDIO 1(2 TV)
FRONT
5
OPTICAL4OPTICAL3COAXIAL2
COAXIAL6
SURROUNDR
L
PHONO NETWORK
AAV  2B
GND
HDMI
HDMI OUTARC12
OPTICALAUDIO 1(2 TV)5
AUDIO
OPTICALRL
OOL
R L
R
HDMI
HDMI
This unit (rear) HDMI OUT 1 jack
AUDIO1 (OPTICAL or AUDIO)  jacks Audio output 
(digital optical or analog stereo) TV
HDMI input
1
2TV connection
3
4
5
6
7
8
9
    Add page 35 to Favourites
    image text
    Enable zoom 
    							En
35
■ Connection method 4 (TV without HDMI input jacks)Depending on the video input jacks available on your TV, choose one of the following 
connections.
If you select “AUDIO1” as the input source by pressing AUDIO1 or SCENE(TV), the TV 
audio will be played back on this unit. If you connect your TV to this unit with a cable other than HDMI, videos input to this unit via HDMI cannot 
be output to the TV. Also, analog videos that can be output to the TV differ according to the “Analog to 
Analog Conversion” setting. For details, see “Video signal flow” (p.149).
 If you have connected any external device to the AUDIO1 jacks, connect the TV to one of the AUDIO2~4  jacks. To use the SCENE function (p.58), you also need to change the input assignment for SCENE(TV).
 To use the MONITOR OUT jacks for the TV in the main zone, set “Monitor Out Assign” (p.120) in the  “Setup” menu to “Main” (default).COMPONENT VIDEO connection (with a component video cable) S VIDEO connection (with an S-video cable)
VIDEO (composite video) connection (with a video pin cable)
YP
BPR
YP
BPR
YP
BPR
OPTICALUTT/4
HDMI OUTARC1
2 HDMI
(1 BD/DVD)
MONITOR OUT/
ZONE OUT
MONITOR OUT/ZONE OUT
I
AV  1
AV  1 AV  3
AV 2 AV 3 AV 4 AV 5
COMPONENT VIDEO
AUDIO 4
MULTI CH INPUT
ZONE OUT/PRE OUT
AUDIO 3
AUDIO 2
(3 CD)
AUDIO 1(2 TV) CENTER
SUBWOOFER
ZONE 2/
F.PRESENCE ZONE 3/
R.PRESENCE
FRONTSURROUND SUR. BACK
SPEAKERSZONE 2/ZONE 3/R.PRESENCE
SURROUND BACK
R
5
COAXIAL6
L
SURROUNDR
L
R
L
AAV  2B
C
AV  4
D
PRE OUTFRONTSURROUND SUR
.(SIN
EXTRA SP2
SINGLE
OPTICALAUDIO 1(2 TV)5
AUDIO
OPTICALRL
YP
B
PR
MONITOR OUT/ZONE OUT
YP
B
PR
COMPONENT VIDEO
OOL
R L
R
PRPBY
P
RPBY
This unit (rear)MONITOR OUT 
(COMPONENT VIDEO) jacks 
Video input (component video)
TV
AUDIO1 
(OPTICAL or AUDIO) jacks Audio output 
(digital optical or analog stereo)
FM 75ΩANTENNAAM(4 RADIO)
AV  1(1 BD/DVD)COAXIAL1DOCK
YP
BPR
OPTICAL
AV OUTAV  O U T /ZONE 4
RL
HDMI OUTARC1 2
(1 BD/DVD
MONITOR OUT/
ZONE OUT
AV  1
AV  1 COMP
AV  3 AV  4
AV  2
AUDIO 4
MUL
AUDIO 3
AUDIO 2(3 CD)
AUDIO 1(2 TV)
FRONTSURROU
5
OPTICAL4OPTICAL3COAXIAL2
COAXIAL6
SURROUNDR
L
PHONO NETWORK
AAV  2B
GND
OPTICALAUDIO 1(2 TV)5
AUDIO
OPTICALRL
MONITOR OUT/ ZONE OUT
S VIDEO
OOL
R L
RS
S
This unit (rear) MONITOR OUT 
(S VIDEO) jack
Video input (S-video)
AUDIO1 (OPTICAL or AUDIO)  jacks Audio output 
(digital optical or analog stereo) TV
FM
75ΩANTENNAAM(4 RADIO)
AV  1(1 BD/DVD)COAXIAL1DOCK
YP
BPR
OPTICAL
AV OUTAV  O U T /ZONE 4
RL
HDMI OUTARC1 2
(1 BD/DVD
MONITOR OUT/
ZONE OUT
AV  1
AV  1 COMP
AV  3 AV  4
AV  2
AUDIO 4
MUL
AUDIO 3
AUDIO 2(3 CD)
AUDIO 1(2 TV)
FRONTSURROU
5
OPTICAL4OPTICAL3COAXIAL2
COAXIAL6
SURROUNDR
L
PHONO NETWORK
AAV  2B
GND
MONITOR OUT/
ZONE OUT
VIDEO
V
V
This unit (rear) MONITOR OUT 
(VIDEO) jack
TV
Video input
(composite video)
1
2TV connection
3
4
5
6
7
8
9
    Add page 36 to Favourites
    image text
    Enable zoom 
    							En
36
■ Connecting another TV or a projectorThis unit has 2 HDMI output j acks. If you connect another TV or a projector to this unit 
with an HDMI cable, you can switch the TVs (or projector) to be used for watching 
videos with the remote control (p.57). HDMI Control is not available on the HDMI OUT 2 jack.
FM 75ΩANTENNAAM(4 RADIO)
AV  1(1 BD/DVD)COAXIAL1DOCK
YP
BPR
OPTICAL
AV OUTAV  O U T /ZONE 4
RL
HDMI OUTARC1 2
(1 BD/DVD
MONITOR OUT/
ZONE OUT
AV  1
AV  1 COMP
AV  3 AV  4
AV  2
AUDIO 4
MUL
AUDIO 3
AUDIO 2(3 CD)
AUDIO 1(2 TV)
FRONTSURROU
5
OPTICAL4OPTICAL3COAXIAL2
COAXIAL6
SURROUNDR
L
PHONO NETWORK
AAV  2B
GND
HDMI OUTARC12
HDMI
HDMI
HDMI
This unit (rear)
HDMI OUT 2 jack
HDMI input
Projector
TV (already connected)1
2TV connection
3
4
5
6
7
8
9
    Add page 37 to Favourites
    image text
    Enable zoom 
    							En
37
This unit is equipped with a variety of input jacks including HDMI input jacks to allow 
you to connect different types of playback devices. For information on how to connect 
an iPod, a Bluetooth component or a USB storage device, see the following pages.
- Connecting an iPod (p.70)
- Connecting a Bluetooth receiver (p.75)
- Connecting a USB storage device (p.77)Connecting video devices (BD/DVD players, etc.)Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles 
to this unit. Depending on the video/audio output jacks available on your video device, 
choose one of the following connections. We recommend using an HDMI connection if the 
video device has an HDMI output jack. Videos input to this unit via HDMI cannot be output to a TV connected to this unit with a cable other than  HDMI.
 The following explanation is based on the assumption that you have not changed the “Input Assignment”  setting (p.121) in the “Setup” menu. As necessary, you can assign the COMPONENT VIDEO ( ,  ,  ,
 
), COAXIAL ( a, b, f) and OPTICAL (c , d, e) jacks to another input source.
 If you make more than one audio connection for one input source, an audio signal played back on this unit  will be determined according to the “Audio Select” setting (p.97) in the “Option” menu.
■  HDMI connectionConnect a video device to this unit with an HDMI cable.
If you select the input source by pressing AV1~7, the video/audio played back on the 
video device will be output from this unit.
3
Connecting playback devices
SPEAKER IMPEDANCE +12V 0.1A 
TRIGG
OUT
PBPR
YP
BPR
YP
BPR
112
2
HDMI
(1 BD/DVD)
MONITOR OUT/ZONE OUT
IN OUT
2IN OUT
AV  1
AV  3
AV 2 AV 3 AV 4 AV 5 AV 6 AV 7
1
2
REMOTE
COMPONENT VIDEOMULTI CH INPUT
ZONE OUT/PRE OUT
CENTERSUBWOOFER
ZONE 2/
F.PRESENCE ZONE 3/
R.PRESENCE
FRONTSURROUND SUR. BACK
SPEAKERS
CENTER FRONT
ZONE 2/ZONE 3/R.PRESENCE
SURROUND BACK
R
L
UNDL
R
R
L
L
C
AV  4
D
PRE OUT
SUBWOOFER
CENTER
FRONTSURROUND SUR. BACK(SINGLE) (FRONT)
(REAR)
EXTRA SP2
SINGLE
HDMI
HDMI
HDMI
This unit (rear) HDMI output
Video device
HDMI (AV1~7) jacks 
1
2
3Playback device connections
4
5
6
7
8
9
    Add page 38 to Favourites
    image text
    Enable zoom 
    							En
38
■ Component video connectionConnect a video device to this unit with  a component video cable and an audio cable 
(digital coaxial, digital optical or stereo pin  cable). Choose a set of input jacks (on this 
unit) depending on the audio output jacks available on your video device.
If you select the input source by pressing  AV1~4, the video/audio played back on the 
video device will be output from this unit.
■  S-video connectionConnect a video device to this unit with an S-video cable and an audio cable (digital 
coaxial, digital optical or stereo pin cable).  Choose a set of input jacks (on this unit) 
depending on the audio output jack s available on your video device.
If you select the input source by pressing AV1~4, the video/audio played back on the 
video device will be output from this unit.
Output jacks on video device
Input jacks on this unit
Video
Audio
Component video Digital coaxial AV1~2 (COMPONENT VIDEO + COAXIAL)
Digital optical AV3~4 (COMPONENT VIDEO + OPTICAL)
Analog stereo AV1~4 (COMPONENT VIDEO + AUDIO)
FM 75ΩANTENNAAM(4 RADIO)
AV  1(1 BD/DVD)COAXIAL1DOCK
YP
BPRYP
BPR
OPTICAL
AV OUTAV  O U T /ZONE 4
RL
HDMI OUTARC1 2
H
(1 BD/DVD)
MONITOR OUT/
ZONE OUT
AV  1
AV  1 AV  3
AV 2 AV 3
COMPONENT VIDEO
AV  3 AV  4
AV  2
AUDIO 4
MULTI CH INPUT
ZONE OUT/PRE 
AUDIO 3
AUDIO 2
(3 CD)
AUDIO 1(2 TV) CENTER
SUBWOOFER
ZONE 2/
F.PRESENCE Z
OR.PRE
FRONTSURROUND SUR. BACK
ZO
SURROUND BACKR
5
OPTICAL4OPTICAL3COAXIAL2
COAXIAL6
L
SURROUNDR
L
R
PHONO NETWORK
AAV  2B
C
AV  4
D
GND
SINGLE
YP
B
PR
YP
B
PR
RLCOAXIALOPTICAL
CC
L
R L
ROO
PRPBY
P
RPBY
This unit (rear) AV1~4 
(COMPONENT VIDEO)  jacks
Video output 
(component video)
Video device
Audio output 
(any of digital coaxial, digital optical, 
analog stereo)
Any of AV1~2 (COAXIAL), 
AV3~4 (OPTICAL), 
AV1~4 (AUDIO) jacks
Output jacks on video device
Input jacks on this unit
Video
Audio
S-video Digital coaxial
AV1~2 (S VIDEO + COAXIAL)
Digital optical AV3~4 (S VIDEO + OPTICAL)
Analog stereo AV1~4 (S VIDEO + AUDIO)
FM
75ΩANTENNAAM(4 RADIO)
AV  1(1 BD/DVD)COAXIAL1DOCK
OPTICAL
AV OUTAV  O U T /
ZONE 4
RL
HARC1MONITOR OUT/ ZONE OUT
AV  3 AV  4
AV  2
AUDIO 2(3 CD)
AUDIO 1(2 TV)5
OPTICAL4OPTICAL3COAXIAL2
COAXIAL6
PHONO NETWORKGND
S VIDEO
CC
L
R L
ROO
S
S
RLCOAXIAL
OPTICAL
This unit (rear) AV1~4 
(S VIDEO) jacks Video output 
(S-video)
Video device
Audio output 
(any of digital coaxial, digital optical,  analog stereo)
Any of AV1~2 (COAXIAL), 
AV3~4 (OPTICAL), 
AV1~4 (AUDIO) jacks
1
2
3Playback device connections
4
5
6
7
8
9
    Add page 39 to Favourites
    image text
    Enable zoom 
    							En
39
■ Composite video connectionConnect a video device to this unit with a vi deo pin cable and an audio cable (digital 
coaxial, digital optical or stereo pin cable). Choose a set of input jacks (on this unit) 
depending on the audio output jacks available on your video device.
If you select the input source by pressing  AV1~4, the video/audio played back on the 
video device will be output from this unit.
Connecting audio devices (CD players, etc.)Connect audio devices such as CD players,  MD players and a turntable to this unit. 
Depending on the audio output jacks available on your audio device, choose one of the 
following connections. The following explanation is based on the assumption that you have not changed the “Input Assignment”  setting (p.121) in the “Setup” menu. As necessary, you can assign the COAXIAL (a , b , f ) and OPTICAL 
(c , d, e) jacks to another input source.
 If you make more than one audio connection for one input source, an audio signal played back on this unit  will be determined according to the “Audio Select” setting (p.97) in the “Option” menu.
Output jacks on video device
Input jacks on this unit
Video
Audio
Composite video Digital coaxial AV1~2 (VIDEO + COAXIAL)
Digital optical AV3~4 (VIDEO + OPTICAL)
Analog stereo AV1~4 (VIDEO + AUDIO)
FM 75ΩANTENNAAM(4 RADIO)
AV  1(1 BD/DVD)COAXIAL1DOCK
OPTICAL
AV OUTAV  O U T /
ZONE 4
RL
HARC1MONITOR OUT/ ZONE OUT
AV  3 AV  4
AV  2
AUDIO 2(3 CD)
AUDIO 1(2 TV)5
OPTICAL4OPTICAL3COAXIAL2
COAXIAL6
PHONO NETWORKGND
VIDEO
COAXIAL
OPTICAL
CC
L
R L
ROO
V
V
RL
This unit (rear) AV1~4 (VIDEO) 
jacks Video output 
(composite video)
Video device
Audio output 
(any of digital coaxial, digital optical,  analog stereo)
Any of AV1~2 (COAXIAL), 
AV3~4 (OPTICAL), 
AV1~4 (AUDIO) jacks
Audio output jacks on audio device
Audio input jacks on this unit
Digital coaxial AV 1 ~ 2  ( C O A X I A L )
AUDIO2 (COAXIAL)
Digital optical AV3~4 (OPTICAL)
AUDIO1 (OPTICAL)
Analog stereo AV1~4 (AUDIO)
AUDIO1~4 (AUDIO)
Turntable (PHONO) PHONO
1
2
3Playback device connections
4
5
6
7
8
9
    Add page 40 to Favourites
    image text
    Enable zoom 
    							En
40
If you select the input source by pressing AV1~4, AUDIO1~4 or PHONO, the audio 
played back on the audio device will be output from this unit.
Connecting to the jacks on the front panelUse the VIDEO AUX jacks on the front panel  to temporarily connect devices such as a 
game console and a camcorder to this unit.
Before making a connection, stop playback on the device and turn down the volume of 
this unit.
If you select “V-AUX” as the input source by pressing V-AUX, the video/audio played 
back on the device will be output from this unit. If you connect video devices to both the HDMI IN jack and analog video/audio jacks, this unit outputs video/ audio input through the HDMI IN jack.
FM 75ΩANTENNAAM(4 RADIO)
AV  1(1 BD/DVD)COAXIAL1DOCK
YP
B
OPTICAL
AV OUTAV  O U T /ZONE 4
RL
HDMI OUTARC1 2
(1
MONITOR OUT/
ZONE OUT
AV  1
AV  1
AV  3 AV  4
AV  2
AUDIO 4
AUDIO 3
AUDIO 2
(3 CD)
AUDIO 1(2 TV)
FRONT
5
OPTICAL4OPTICAL3COAXIAL2
COAXIAL6
SURROUNDR
L
PHONO NETWORK
AAV  2B
GND
RLPHONOGND
RLPHONOGNDCOAXIAL
OPTICAL
CC
L
R L
ROO
L
R L
R
This unit 
(rear) PHONO jacks
Audio output 
(PHONO)
Turntable
Audio output 
(any of digital coaxial, digital optical, 
analog stereo)
Any of AV1~4, AUDIO1~4 
(COAXIAL, OPTICAL, AUDIO) jacks Audio device
UO
HDMI IN
VIDEO AUX
DISPLAY
RETURN
ENTER
ZONE 2
ZONE 3
ZONE 4
ZONE CONTROL
YPAO MIC
PHONESSILENT CINEMA
USBiPod/iPhone
PROGRAM
TUNING/CH
ROPTICAL
L AUDIO
VIDEO
S VIDEO
FM AM
V
R
L
HDMI
S
O
Game console
Camcorder This unit (front)
1
2
3Playback device connections
4
5
6
7
8
9
    All Yamaha manuals Comments (0)