Yamaha Audiogram 3 Manual
Here you can view all the pages of manual Yamaha Audiogram 3 Manual. The Yamaha manuals for SD/USB audio player are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
Quick Guide
11AUDIOGRAM 3 Owner’s Manual
3When the Project Assistant window appears, select the [More] menu → [Empty] and
click [Create].
A new project is created.
Recorded Cubase AI data is stored as a “Project.”.
4Select [Device Setup] from the [Devices] menu to open the Device Setup window.
Windows:
Select [VST Audio System] in the [Devices] field on the left side of the window. Select [ASIO DirectX
Full Duplex Driver] in the [ASIO Driver] field on the right side of the window. A dialog box will...](http://img.usermanuals.tech/thumb/83/104289/w300_audiogram-3-manual-1523369581_d-10.png "Page 11
Quick Guide
11AUDIOGRAM 3 Owner’s Manual
3When the Project Assistant window appears, select the [More] menu → [Empty] and
click [Create].
A new project is created.
Recorded Cubase AI data is stored as a “Project.”.
4Select [Device Setup] from the [Devices] menu to open the Device Setup window.
Windows:
Select [VST Audio System] in the [Devices] field on the left side of the window. Select [ASIO DirectX
Full Duplex Driver] in the [ASIO Driver] field on the right side of the window. A dialog box will...")
Quick Guide 11AUDIOGRAM 3 Owner’s Manual 3When the Project Assistant window appears, select the [More] menu → [Empty] and click [Create]. A new project is created. Recorded Cubase AI data is stored as a “Project.”. 4Select [Device Setup] from the [Devices] menu to open the Device Setup window. Windows: Select [VST Audio System] in the [Devices] field on the left side of the window. Select [ASIO DirectX Full Duplex Driver] in the [ASIO Driver] field on the right side of the window. A dialog box will...
Page 12
, [USB Audio CODEC](Mac) in the
[Devices] field on the left side of the Device Setup window, and click [Control Panel] on
the right side of the window.
Windows:
The ASIO Direct Sound Full Duplex Setup dialog box will be displayed. Check only the input port and
output port [USB Audio CODEC] checkbox, and then click [OK] to close the dialog window.
Mac:
The [CoreAudio Device Settings] dialog window appears. Check...](http://img.usermanuals.tech/thumb/83/104289/w300_audiogram-3-manual-1523369581_d-11.png "Page 12
12AUDIOGRAM 3 Owner’s Manual
Quick Guide
5Select [ASIO DirectX Full Duplex Driver](Windows), [USB Audio CODEC](Mac) in the
[Devices] field on the left side of the Device Setup window, and click [Control Panel] on
the right side of the window.
Windows:
The ASIO Direct Sound Full Duplex Setup dialog box will be displayed. Check only the input port and
output port [USB Audio CODEC] checkbox, and then click [OK] to close the dialog window.
Mac:
The [CoreAudio Device Settings] dialog window appears. Check...")
12AUDIOGRAM 3 Owner’s Manual Quick Guide 5Select [ASIO DirectX Full Duplex Driver](Windows), [USB Audio CODEC](Mac) in the [Devices] field on the left side of the Device Setup window, and click [Control Panel] on the right side of the window. Windows: The ASIO Direct Sound Full Duplex Setup dialog box will be displayed. Check only the input port and output port [USB Audio CODEC] checkbox, and then click [OK] to close the dialog window. Mac: The [CoreAudio Device Settings] dialog window appears. Check...
Page 13
![Page 13
Quick Guide
13AUDIOGRAM 3 Owner’s Manual
7Select [VST Connections] from the [Devices] menu.
Windows:
If “Not Connected” is selected in the [Audio Device] field, click on the “Not Connected” indication, and
then switch to [ASIO DirectX Full Duplex Driver].
Also set the [Outputs] in the same way, and then close the window.
Mac:
If “Not Connected” is selected in the [Audio Device] field, click on the “Not Connected” indication, and
then switch to [USB Audio CODEC].
Also set the [Outputs] in the same way,...](http://img.usermanuals.tech/thumb/83/104289/w300_audiogram-3-manual-1523369581_d-12.png "Page 13
Quick Guide
13AUDIOGRAM 3 Owner’s Manual
7Select [VST Connections] from the [Devices] menu.
Windows:
If “Not Connected” is selected in the [Audio Device] field, click on the “Not Connected” indication, and
then switch to [ASIO DirectX Full Duplex Driver].
Also set the [Outputs] in the same way, and then close the window.
Mac:
If “Not Connected” is selected in the [Audio Device] field, click on the “Not Connected” indication, and
then switch to [USB Audio CODEC].
Also set the [Outputs] in the same way,...")
Quick Guide 13AUDIOGRAM 3 Owner’s Manual 7Select [VST Connections] from the [Devices] menu. Windows: If “Not Connected” is selected in the [Audio Device] field, click on the “Not Connected” indication, and then switch to [ASIO DirectX Full Duplex Driver]. Also set the [Outputs] in the same way, and then close the window. Mac: If “Not Connected” is selected in the [Audio Device] field, click on the “Not Connected” indication, and then switch to [USB Audio CODEC]. Also set the [Outputs] in the same way,...
Page 14
![Page 14
14AUDIOGRAM 3 Owner’s Manual
Quick Guide
2Make sure the [Record Enable] button for the track to be recorded is turned on.
If the [Record Enable] button is off, click it to turn it on.
3Play the instrument to be recorded, and adjust the AUDIOGRAM LEVEL controls so that
the Clipping indicator never lights.
4Specify the point at which you want to start recording via the ruler at the top of the win-
dow for the project.
Click the black area of the ruler to move the project cursor (the vertical black line)...](http://img.usermanuals.tech/thumb/83/104289/w300_audiogram-3-manual-1523369581_d-13.png "Page 14
14AUDIOGRAM 3 Owner’s Manual
Quick Guide
2Make sure the [Record Enable] button for the track to be recorded is turned on.
If the [Record Enable] button is off, click it to turn it on.
3Play the instrument to be recorded, and adjust the AUDIOGRAM LEVEL controls so that
the Clipping indicator never lights.
4Specify the point at which you want to start recording via the ruler at the top of the win-
dow for the project.
Click the black area of the ruler to move the project cursor (the vertical black line)...")
14AUDIOGRAM 3 Owner’s Manual Quick Guide 2Make sure the [Record Enable] button for the track to be recorded is turned on. If the [Record Enable] button is off, click it to turn it on. 3Play the instrument to be recorded, and adjust the AUDIOGRAM LEVEL controls so that the Clipping indicator never lights. 4Specify the point at which you want to start recording via the ruler at the top of the win- dow for the project. Click the black area of the ruler to move the project cursor (the vertical black line)...
Page 15
![Page 15
Quick Guide
15AUDIOGRAM 3 Owner’s Manual
4Select [Mixer] from the [Devices] menu to open the Mixer window.
The overall playback level will be displayed via the master section bus level meter on the right side of
the mixer window, and the channel level will be displayed via the channel strip level meter.
To hear the playback sound via the AUDIOGRAM interface, adjust the volume with the OUT
LEVEL control.
The playback level will approximately match the recording level when the computer output is
set to...](http://img.usermanuals.tech/thumb/83/104289/w300_audiogram-3-manual-1523369581_d-14.png "Page 15
Quick Guide
15AUDIOGRAM 3 Owner’s Manual
4Select [Mixer] from the [Devices] menu to open the Mixer window.
The overall playback level will be displayed via the master section bus level meter on the right side of
the mixer window, and the channel level will be displayed via the channel strip level meter.
To hear the playback sound via the AUDIOGRAM interface, adjust the volume with the OUT
LEVEL control.
The playback level will approximately match the recording level when the computer output is
set to...")
Quick Guide 15AUDIOGRAM 3 Owner’s Manual 4Select [Mixer] from the [Devices] menu to open the Mixer window. The overall playback level will be displayed via the master section bus level meter on the right side of the mixer window, and the channel level will be displayed via the channel strip level meter. To hear the playback sound via the AUDIOGRAM interface, adjust the volume with the OUT LEVEL control. The playback level will approximately match the recording level when the computer output is set to...
Page 16
![Page 16
16AUDIOGRAM 3 Owner’s Manual
Quick Guide
In this section we’ll try mixing down multiple recorded audio tracks to stereo, and creating an
audio file. Mixes can be stored as WAV or AIFF files, which can then be recorded to audio
CDs.
1Launch Cubase AI and open a project file.
2Click the [Start] button on the Transport Panel.
3While listening to playback, drag the channel strip level faders up and down to create
the desired initial balance, then adjust the overall volume using the bus volume fader.
4Drag...](http://img.usermanuals.tech/thumb/83/104289/w300_audiogram-3-manual-1523369581_d-15.png "Page 16
16AUDIOGRAM 3 Owner’s Manual
Quick Guide
In this section we’ll try mixing down multiple recorded audio tracks to stereo, and creating an
audio file. Mixes can be stored as WAV or AIFF files, which can then be recorded to audio
CDs.
1Launch Cubase AI and open a project file.
2Click the [Start] button on the Transport Panel.
3While listening to playback, drag the channel strip level faders up and down to create
the desired initial balance, then adjust the overall volume using the bus volume fader.
4Drag...")
16AUDIOGRAM 3 Owner’s Manual Quick Guide In this section we’ll try mixing down multiple recorded audio tracks to stereo, and creating an audio file. Mixes can be stored as WAV or AIFF files, which can then be recorded to audio CDs. 1Launch Cubase AI and open a project file. 2Click the [Start] button on the Transport Panel. 3While listening to playback, drag the channel strip level faders up and down to create the desired initial balance, then adjust the overall volume using the bus volume fader. 4Drag...
Page 17
![Page 17
Quick Guide
17AUDIOGRAM 3 Owner’s Manual
6Double-click the left locator (starting point) and right locator (ending point) of the Trans-
port panel. Change each highlighted number, and then specify the position of the loca-
tor.
7When the final mix adjustments have been made, go to the [File] menu and select
[Export] → [Audio Mixdown].
8Enter a file name and select a destination for the file as well as a file type.
If you intend to use the file to create an audio CD, select the WAV file type (AIFF on Mac OS...](http://img.usermanuals.tech/thumb/83/104289/w300_audiogram-3-manual-1523369581_d-16.png "Page 17
Quick Guide
17AUDIOGRAM 3 Owner’s Manual
6Double-click the left locator (starting point) and right locator (ending point) of the Trans-
port panel. Change each highlighted number, and then specify the position of the loca-
tor.
7When the final mix adjustments have been made, go to the [File] menu and select
[Export] → [Audio Mixdown].
8Enter a file name and select a destination for the file as well as a file type.
If you intend to use the file to create an audio CD, select the WAV file type (AIFF on Mac OS...")
Quick Guide 17AUDIOGRAM 3 Owner’s Manual 6Double-click the left locator (starting point) and right locator (ending point) of the Trans- port panel. Change each highlighted number, and then specify the position of the loca- tor. 7When the final mix adjustments have been made, go to the [File] menu and select [Export] → [Audio Mixdown]. 8Enter a file name and select a destination for the file as well as a file type. If you intend to use the file to create an audio CD, select the WAV file type (AIFF on Mac OS...
Page 18
18AUDIOGRAM 3 Owner’s Manual Controls and Functions 1PHANTOM +48V Switch/Indicator This switch toggles phantom power on and off. If you set the switch on ( ), the AUDIOGRAM supplies phantom power to the MIC/INST jack (XLR-type) 8. Tu rn this s witch on when using a phantom-powered condenser microphone. • Be sure to leave this switch off ( ) if you do not need phantom power. • When turning the switch on, be sure that only a condenser micro- phone is connected to the MIC/ INST input jack. Other...
Page 19
Controls and Functions 19AUDIOGRAM 3 Owner’s Manual 8MIC/INST Input Jack Microphones and instruments such as gui- tars can be connected here using XLR or phone jack cables. Set the MIC/INST switch 2 to MIC or INST according to the type of device connected. You can directly connect an elec- tric guitar or bass without the need for a separate DI (Direct Injection) box or amp simulator. 9LINE Input Jacks These inputs are intended mainly for use with instruments and equipment having stereo outputs, such...
Page 20
![Page 20
20AUDIOGRAM 3 Owner’s Manual
Troubleshooting
The AUDIOGRAM interface won’t turn on.
❑Is the included USB cable properly plugged into the interface and a comp\
uter?
The system doesn’t work properly.
❑Are the USB cable and all necessary audio cables properly connected?
❑Are you using a USB hub?
USB hubs can interfere with proper operation, so try connecting the AUDIOGRAM interface
directly to a USB port on the computer. If the computer has multiple USB\
ports, try a different
USB port.
❑Are you using...](http://img.usermanuals.tech/thumb/83/104289/w300_audiogram-3-manual-1523369581_d-19.png "Page 20
20AUDIOGRAM 3 Owner’s Manual
Troubleshooting
The AUDIOGRAM interface won’t turn on.
❑Is the included USB cable properly plugged into the interface and a comp\
uter?
The system doesn’t work properly.
❑Are the USB cable and all necessary audio cables properly connected?
❑Are you using a USB hub?
USB hubs can interfere with proper operation, so try connecting the AUDIOGRAM interface
directly to a USB port on the computer. If the computer has multiple USB\
ports, try a different
USB port.
❑Are you using...")
20AUDIOGRAM 3 Owner’s Manual Troubleshooting The AUDIOGRAM interface won’t turn on. ❑Is the included USB cable properly plugged into the interface and a comp\ uter? The system doesn’t work properly. ❑Are the USB cable and all necessary audio cables properly connected? ❑Are you using a USB hub? USB hubs can interfere with proper operation, so try connecting the AUDIOGRAM interface directly to a USB port on the computer. If the computer has multiple USB\ ports, try a different USB port. ❑Are you using...
All Yamaha manuals