Yamaha Audiogram 3 Manual

1AUDIOGRAM 3 Owner’s Manual
AUDIOGRAM 3
Owner’s Manual
C0 (10.11.30)
English
Deutsch
Français
Español
ÔŠ 
Russian
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
Руководс\bво поль\fова\bе\аля
	{
†Ì	{
USB AUDIO INTERFACE
Русский
English
Deutsch
Français
Español
ÔŠ 
FR
ES
RU
JA
EN
DE 

2AUDIOGRAM 3 Owner’s Manual
1.  IMPORTANT NOTICE: DO NOT MOD-IFY THIS  UNIT!
This product, when installed as indicated in 
the instructions contained in this manual, 
meets FCC requirements. Modifications not 
expressly approved by Yamaha may void your 
authority, granted by the FCC, to use the 
product.
2. IMPORTANT: When connecting this prod-
uct to accessories and/or another product use 
only high quality shielded cables. Cable/s 
supplied with this product MUST be used. Fol-
low all installation...

3AUDIOGRAM 3 Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING 
* Please keep this manual in a safe place for future reference.
 WARNING
Always follow the basic precautions listed below to avoid the possibilit\
y of serious injury or even death from 
electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not 
limited to, the following:
•Do not open the device or attempt to disassemble the internal 
parts or modify them in any way. The device...

4AUDIOGRAM 3 Owner’s Manual
Always unplug the USB cable from a computer or turn off the computer to \
turn off the device when the device is not in use.
The performance of components with moving contacts, such as switches, vo\
lume controls, and connectors, deteriorates over 
time. Consult qualified Yamaha service personnel about replacing defective components.
SPECIAL NOTICES
• This manual is the exclusive copyright of Yamaha Corporation.
• The included software is the exclusive copyright of Steinberg...

5AUDIOGRAM 3 Owner’s Manual
Introduction........................................................................\
............ 5
Contents........................................................................\
.................. 5
Features ........................................................................\
.................. 6
Setup........................................................................\
....................... 7
Quick Guide...

6AUDIOGRAM 3 Owner’s Manual
Connect To Your Computer via a Single USB Cable (page 8)
The AUDIOGRAM interface connects to your computer via the supplied USB cable. Stereo audio 
data is transferred in both directions—from the interface to the computer, and vice-versa—via the 
USB connection (44.1 kHz or 48 kHz sampling frequency).
No Driver Installation Required (page 8)
The AUDIOGRAM system uses the standard drivers included in your computer’s operating system, 
so there’s no need to install any extra...

7AUDIOGRAM 3 Owner’s Manual
Setup
Be sure to turn the PHANTOM 
+48V switch (★) on when 
using a phantom-powered 
condenser microphone.
Microphone
Keyboard, etc.
ComputerHeadphones
Audio system
To  connect a device such as a 
microphone:
To   connect an instrument such 
as an electric guitar or bass: USB cable
Cubase AI 

8AUDIOGRAM 3 Owner’s Manual
Quick Guide
This quick setup and operation guide covers everything from installing t\
he Cubase AI
software to using Cubase AI for recording and mixdown. While going throu\
gh this section
you might find it useful to also refer to the “Controls and Functions” section on page 18, as
well as the pdf manual supplied with the Cubase AI software.
You are only permitted to use this software pur suant to the terms and conditions of the
“Steinberg Software End User License Agreement...

Quick Guide
9AUDIOGRAM 3 Owner’s Manual
To  prevent loud pops and noises, turn on the power to your sound gear starting with the sources 
(instruments, CD players, etc.) and ending with the audio system (monitor speakers).
1Turn on the instruments and microphones.
2If you are using a condenser microphone for the channel 1, turn on the PHANTOM +48V 
switch.
Observe the following precautions when turning on phantom power.
• Make sure that the PHANTOM +48V switch is off when phantom power is not 
needed.
•...

10AUDIOGRAM 3 Owner’s Manual
Quick Guide
1Adjust the volume on all instruments that are connected to the AUDIOGRAM interface.
Set the OUT LEVEL control to the minimum position. Failure to do so may result in 
loud noise bursts that can damage your equipment, your ears, or both.
2Adjust the channel LEVEL controls so that the level indicator PEAK LED flash briefly on 
the highest peak levels.
3Adjust the overall volume with the OUT LEVEL control while monitoring via headphones 
or monitor speakers.
This...