Xerox WorkCentre 7335 User Manual

259
Configure LPD 
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  
Press Enter.
2. Click the Properties tab.
3. Click the plus symbol (+) to the left of Connectivity, then the Protocols file folder.
4. Select LPD in the directory tree.
5. The available selections include:
Port Number, with a default value of 515.  As this is the port for the TCP Spooler assigned by the IANA 
(Internet Assigned Numbers Authority), the default value should not need to...

260
Configure SNMP 
It is possible to remotely define and modify GET (Read Only), SET (Read/Write), and Trap SNMP (Simple 
Network Management Protocol) community names for the Device. You can also enter the System 
Administrators Name here for packet identification purposes.
SNMP Community Name properties that can be configured
Community Name (Read Only)—This is the password for SNMP GET requests from the SNMP Manager 
to the Agent in the Device.  Applications, such as Xerox Printer Map or CentreWare...

261
Configure Microsoft Networking (also known as SMB)
For full instructions on configuring this device for Microsoft Networking, refer to the Microsoft (NetBIOS 
over IP) Networks topic in the NOS Selection section of this guide.
Downloaded From ManualsPrinter.com Manuals 

262
Configure IPP 
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  
Press Enter.
2. Click the Properties tab.
3. Click the plus (+) symbol to the left of Connectivity, then the Protocols file folder.
4. Select IPP in the directory tree.
5. The available selections include:
Port Number Static Display, with a default value of 631.  This is the port number assigned by IANA 
(Internet Assigned Numbers Authority.
Additional Port Number entry box.  You can...

263
Modify the HTTP (Internet Services) Settings 
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  
Press Enter.
2. Click the Properties tab.
3. Click the plus symbol (+) to the left of Connectivity, then the Protocols file folder.
4. Select HTTP in the directory tree.
5. The available selections include:
Port Number entry box.  The default value is Port 80, which is the HTTP Port number assigned by the 
IANA (Internet Assigned Numbers Authority)....

264
Configure WSD (Web Services on Devices)
As stated by Microsoft, WSD is Microsoft’s implementation of the Devices Profile for Web Services 
(DPWS) standard, a specification that enables devices, such as printers, cell phones, cameras, and home 
entertainment centers, to use standard Web-based protocols (HTTP and UDP) to discover one another, 
advertise their services over the IP (versions 4 or 6) network, and report on their operational status.
Typically, a device such as a network printer will use a...

265
Configure Port 9100 (Raw Printing) 
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  
Press Enter.
2. Click the Properties tab.
3. Click the plus (+) symbol to the left of Connectivity, then the Protocols file folder.
4. Select Port 9100 in the directory tree. (1)
5. The available selections include:
TCP Port Number, with a default value of 9100.  This does not need to be changed.
A TBCP Filter checkbox (displayed when PostScript is enabled)....

266
IP Filtering (IP Address Restriction)
Using Internet Services, access to the Devices Services can be restricted by Host IP Address.
To restrict device access, perform the following steps:
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  
Press Enter.
2. Click the Properties tab.
3. Click the plus symbol (+) to the left of the Security file folder.
4. Select IP Filtering.
5. Choose which IP Filtering to apply depending upon the address space used...

267
Configure EtherTalk (AppleTalk) 
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  
Press Enter.
2. Click the Properties tab.
3. Click the plus (+) symbol to the left of Connectivity, then the Protocols file folder.
4. Select EtherTalk in the directory tree.
Note: If EtherTalk is NOT displayed in the Properties Tab directory tree, click the Port Settings hot link 
in the directory tree.  Use your mouse to place a check mark in the checkbox on the...

268
E-mail, SMTP, and POP3 Settings
The Protocols hot links for SMTP, and POP3, and the E-mail subfolder under the Services folder (on the 
Properties page of Internet Services) can be used instead of the settings at the machine’s User Interface, 
to configure E-mail scanning with the machine.
For complete information on required E-mail settings, refer to the Scan to E-mail topic in the Options 
section of this guide.
To have the Device register changes made to any settings, click the rectangular Apply...