Xerox Projector Dp 1011 User Manual

							Xerox DP1011
user’s guide 
						

							Xerox DP1011
projector
user’s guide 
						

							Copyright © 2003 Visioneer, Inc.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the 
copyright laws.
Xerox ®, the digital X ® are registered trademarks of Xerox Corporation in the United States and/or other countries and 
are used under license. All other Xerox product names and product numbers mentioned in this publication are trademarks 
of Xerox Corporation. Apple, the Apple logo, and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. 
and other countries. 
The Visioneer brand name and logo are registered trademarks of Visioneer, Inc.  
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. All 
Rights Reserved. All other products mentioned herein may be trademarks of their respective companies.
Information is subject to change without notice and does not represent a commitment on the part of Visioneer. The 
software described is furnished under a licensing agreement. The software may be used or copied only in accordance with 
the terms of such an agreement. It is against the law to copy the software on any medium except as specifically allowed in 
the licensing agreement. No part of this document may be reproduced or transmitted in any form or by any means, 
electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated to 
another language, for any purpose other than the licensees personal use and as specifically allowed in the licensing 
agreement, without the express written permission of Visioneer. 
Part Number: 05-0600-000
Restricted Rights Legend
Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in 
Technical Data and Computer Software Clause 52.227-FAR14. Material scanned by this product may be protected by 
governmental laws and other regulations, such as copyright laws. The customer is solely responsible for complying with all 
such laws and regulations.  
						

							FCC Radio Frequency Interference Statement 
This equipment has been tested and found to comply with the limits for the class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against interference in a residential installation. This equipment generates, uses and can radiate 
radio frequency energy and if not installed, and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 
Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant 
to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used 
with this equipment. Operation with non-approved equipment or unshielded cables is likely to result 
in interference to radio and TV reception. The user is cautioned that changes and modifications 
made to the equipment without the approval of manufacturer could void the users authority to 
operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation. 
						

							Xerox DP1011 User’s Guideiv
Table of Contents
Welcome
Precautions
Do’s and Don’ts   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
What’s in the Box   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
The Xerox DP1011 Projector   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connection Ports  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation
Connecting the Projector   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Powering On/Off the Projector   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Warning Indicator Lights   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Adjusting the Projected Image   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adjusting the Projector Zoom/Focus  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Adjusting Projection Image Size   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
User Controls
Panel Control and Remote Control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Panel Control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Remote Control   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
On-Screen Display (OSD) Menus  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Displaying Menus and Selecting Items   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Choose a Language  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjust the Projector Image  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Adjust the Computer Image  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Adjust the Video Image   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Projector Management  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Adjust the PiP (Picture in Picture)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Maintenance
Changing the Lamp   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Troubleshooting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Xerox DP1011 Projector Specifications   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Setting the Screen Resolution   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 
						

							Xerox DP1011 User’s Guide1
Welcome
Your new Xerox DP1011 projector is an XGA single chip 0.7” 
DLP™ (Digital Light Processing) projector with these outstanding 
features:
• True XGA, 1024 x 768 addressable pixels
• 2.1 lbs (0.95 kgs) compact design
• Single chip DLP™ technology
• Compatible with NTSC, NTSC4.43, PAL, PAL-M, PAL-N, 
SECAM, and HDTV
• Full-function remote controller
• User-friendly multilingual on-screen display menu
• Advanced electronic keystone correction and high-quality 
full screen re-scaling image
• User-friendly control panel
• SXGA compression and VGA, SVGA re-sizing
• 120 Watts user replaceable P-VIP lamp
• Apple Macintosh compatible 
						

							Xerox DP1011 User’s Guide2
Precautions
Precautions
Follow all warnings, precautions and maintenance as 
recommended in this user’s guide to avoid injury and to maximize 
the life of your projector.
Warning—Do not look into the projector’s lens when the lamp is 
on. The bright light may hurt your eyes.
Warning—To reduce the risk of fire or electric shock, do not 
expose this product to rain or moisture.
Warning—Do not open or disassemble the product as this may 
cause electric shock.
Warning—When changing the lamp, please allow unit to cool 
down, and follow all changing instructions.
Warning—This product will detect the life of the lamp itself. Please 
be sure to change the lamp when it shows warning messages.
Warning—Reset the “Reset Lamp Hours” function from the On 
Screen Display “Management” menu after replacing the lamp 
module (refer to “Projector Management” on page 19).
Warning—When switching the projector off, please ensure the 
projector completes its cooling cycle before disconnecting power.
Warning—Turn on the projector first and then the signal sources.
Warning—When the lamp reaches the end of its life, it will burn out 
and may make a loud popping sound. If this happens, the projector 
will not turn back on until the lamp module has been replaced. To 
replace the lamp, follow the procedures in “Changing the Lamp” on 
page 21. 
						

							Xerox DP1011 User’s Guide3
Precautions
Do’s and Don’ts
Do:
• Turn off the projector before cleaning.
• Use a soft cloth moistened with mild detergent to clean the 
display housing.
• Disconnect the power plug from AC outlet if the projector is not 
being used for a long period of time.
Don’t:
• Block the ventilation slots and openings on the projector.
• Use abrasive cleaners, waxes or solvents to clean the 
projector.
• Use under the following conditions:
— In extremely hot, cold or humid environment.
— In areas susceptible to excessive dust and dirt.
— Near any appliance generating a strong magnetic field.
— In direct sunlight. 
						

							Xerox DP1011 User’s Guide4
Precautions
What’s in the Box
Before proceeding, check the contents of the box. If items are 
missing or damaged, contact the dealer where you purchased the 
projector.
Projector with lens cap
Power Cord
Quick Start Card
Carrying Case
Remote ControlBattery
VGA Cable
Tech Support Card
Composite Video CableS-Video Cable 
						

							Xerox DP1011 User’s Guide5
Precautions
The Xerox DP1011 Projector
Focus Ring—Rotate to focus the image.
Zoom Ring—Rotate to zoom the image in or out.
Elevator Button—Press to release the elevator foot to lower or 
raise the projector.
Zoom Lens—Extends and retracts as you rotate the zoom ring to 
zoom in/out.
Remote Control Receiver—Infrared receivers that receive signals 
from the remote control. Located on both the front and rear so you 
can control the projector from either position. Do not cover or block 
these receivers.
Connection Ports—Ports for connecting the computer and video 
source to the projector.
Panel Control—Control buttons, Warning Indicator, and Power/
Standby Indicator.
Power Connector—Plug the power cord into the projector here. 
Zoom Ring
Focus Ring
Remote Control 
Receiver
Elevator ButtonRemote Control 
Receiver
Power Connector
Panel Control
Zoom Lens
Connection Ports