Xerox Phaser 8560DT User Manual

Moving and Repacking the Printer
Phaser® 8560 Color Printer 5-21
3.
Remove the waste tray (labeled  B) from the waste tray slot. 
Warning:  The waste tray may be hot; handle it carefully.
4. Empty the waste, and then place the tray in a plastic bag for storage.
Caution:  Shipping the printer with the maintena nce kit and waste tray installed can 
damage the printer.
5. Close the printer’s door and covers.
8560p-035
8560p-036
Downloaded From ManualsPrinter.com Manuals 

Moving and Repacking the Printer
Phaser® 8560 Color Printer 5-22
Turning Off the Printer
To turn off the printer:
1.Press the power switch located under the interfac e cover on the right side of the printer to 
turn it off.
2. Within  10 seconds  after turning off the printer, select 
Shut Down for Moving Printer on 
the control panel.
Caution:  If you receive a 
Power Down Error-Head not Parked message at the control 
panel, the printer is not ready to be moved. If  the printhead is not locked, the...

Moving and Repacking the Printer
Phaser® 8560 Color Printer 5-23
3.
Verify that the flag in the exit tray is in  the raised position. When the flag is raised, the 
printhead is locked.
4. Wait for the printer to complete the cool-down  period for the ink to solidify. The printer 
shuts down when it is cool enough to move.
5. Unplug the printer after the  cool-down cycle is complete.
8560p-099
Downloaded From ManualsPrinter.com Manuals 

Moving and Repacking the Printer
Phaser® 8560 Color Printer 5-24
Packing the Printer
Repack the printer using the original packing material and box, or a Xerox repackaging kit. If 
you do not have the original packaging, or are  unable to repackage the printer, contact your 
local Xerox service representative. 
Caution:  Damage to the printer resulting from improp er moving or failure to repackage the 
printer properly for shipment,  is not covered by the warranty,  service agreement, or Total...

Phaser® 8560 Color Printer6-1
This chapter includes:
■Clearing Paper Jams 
on page 6-2
■Getting Help on page 6-17
See also:  Troubleshooting video tutorials at  www.xerox.com/office/8560Psupport
User Safety on page A-1
Troubleshooting
Downloaded From ManualsPrinter.com Manuals 

Clearing Paper Jams
Phaser® 8560 Color Printer 6-2
Clearing Paper Jams
This section includes:
■Jam at the Exit  on page 6-2
■Jam at the Front Cover  on page 6-7
■Jam at the Trays on page 6-12
See also:  User Safety  on page A-1
Jam at the Exit
To clear a jam at the exit:
1.Open the exit cover.
2. Pull the jammed paper slowly out of the prin ter. Confirm that all paper fragments are 
removed.
8560p-016
8560p-017
Downloaded From ManualsPrinter.com Manuals 

Clearing Paper Jams
Phaser® 8560 Color Printer 6-3
3.
If you did not find paper in Step 2, lift the paper guides.
4. Remove any jammed paper.
5. Close the exit cover.
8560p-042
1
2
8560p-065
8560p-018
Downloaded From ManualsPrinter.com Manuals 

Clearing Paper Jams
Phaser® 8560 Color Printer 6-4
6.
If you did not find paper in the pr evious steps, follow these steps:
a. Pull up the latch on the front of th e printer to open the front cover.
b. Pull the jammed paper slowly out of the prin ter. Confirm that all paper fragments are 
removed.
8560p-012
8560p-020
Downloaded From ManualsPrinter.com Manuals 

Clearing Paper Jams
Phaser® 8560 Color Printer 6-5
c.
Close the front cover.
7. If you did not find jammed paper in th e previous steps, follow these steps:
a. Pull all the trays completely out of the printer.
8560p-014
8560p-028
Downloaded From ManualsPrinter.com Manuals 

Clearing Paper Jams
Phaser® 8560 Color Printer 6-6
b.
Remove any jammed paper from inside the tr ay slot. Confirm that all paper fragments 
are removed.
c. Replace all trays and push each  one completely into the printer.
8560p-024
8560p-005
Downloaded From ManualsPrinter.com Manuals