Home > Xerox > Printer > Xerox Phaser 8560DT User Manual

Xerox Phaser 8560DT User Manual

Here you can view all the pages of manual Xerox Phaser 8560DT User Manual. The Xerox manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 81

Printing on Specialty Media
Phaser® 8560 Color Printer 3-51
3.
Insert a maximum of 50 sheets of glossy paper  in the tray. Adjust the paper guides to fit the 
paper.
 
4. On the control panel, press the  OK button if the correct paper size and type are displayed 
as the current setup, or select th e appropriate paper size and type:
a. Select 
Change setup, and then press the  OK button.
b. Select the appropriate paper size, and then press the  OK button.
c. Select one of the following paper type optio...

Page 82

Printing on Specialty Media
Phaser® 8560 Color Printer 3-52
Printing Glossy Paper fro m Tray 2, 3, or 4
To print glossy paper:
1.Remove the tray from the printer.
2. Insert a maximum of 400 sheets of glossy paper into the tray.
8560p-002
8560p-003
Downloaded From ManualsPrinter.com Manuals 

Page 83

Printing on Specialty Media
Phaser® 8560 Color Printer 3-53
3.
Adjust the paper guides to fit  the glossy paper (if necessary).
■Length guide: Press the sides, then slide the gu ide until the arrow on the guide points 
to the appropriate paper size imprinted on  the bottom of the tray. When properly 
positioned, the guide clicks into place.
■Width guides : Slide the width guides until the a rrows on the guides point to the 
appropriate paper size labeled on the bottom  of the tray. When properly...

Page 84

Printing on Specialty Media
Phaser® 8560 Color Printer 3-54
4.
Insert the tray into the tray slot, and th en push it completely into the printer.
5. On the control panel:
a.Select 
Paper Tray Setup, and then press the  OK button. 
b. Select either 
Tr a y  2  P a p e r  Ty p e, Tray 3 Paper Type, or Tr a y  4  Pa p e r  Ty p e, and then 
press the  OK button.
c. Select one of the following paper type optio ns from the list displayed, and then press 
the  OK  button:
■Custom Type 1
■A custom paper type...

Page 85

Printing on Specialty Media
Phaser® 8560 Color Printer 3-55
Printing Custom Size Paper
In addition to the wide variety of standard paper sizes that you can use for printing, you can 
also print on custom size paper  within the following dimensions.
Note:  Print custom size paper from Tray 1 only.
See also:  Supported Paper Sizes and Weights for Tray 1  on page 3-6
Size Range
Single-Sided Printing 2-Sided Printing
Short edge 76–216 mm (3.0–8.5 in.) 140–216 mm (5.5–8.5 in.)
Long edge 127–356 mm (5.0–14.0...

Page 86

Printing on Specialty Media
Phaser® 8560 Color Printer 3-56
Printing Custom Size Paper from Tray 1
To print custom size paper:
1.Pull down and out on the handle to open Tray 1.
2. Open the tray extension.
8560p-006
8560p-007
Downloaded From ManualsPrinter.com Manuals 

Page 87

Printing on Specialty Media
Phaser® 8560 Color Printer 3-57
3.
Insert custom size paper into the tray:
■Single-sided printing : Insert the side to be printed  facedown with the top of the page 
entering the printer first.
■2-sided printing : Insert side one faceup with the  bottom of the page entering the 
printer first.
4. Adjust the paper guides to fit  the paper loaded in the tray.
8560p-009
8560p-106
XEROX
Downloaded From ManualsPrinter.com Manuals 

Page 88

Printing on Specialty Media
Phaser® 8560 Color Printer 3-58
5.
On the control panel, press the  OK button if the correct paper size and type are displayed 
as the current setup, or select 
Change setup, and then press the  OK button.
■If your custom paper size is displayed in  the list, select it, and then press the 
OK  button. Go to Step 8.
■If your custom paper size is no t displayed in the list, select New Custom Size, and 
then press the  OK button.
6. Select one of the following  Short Edge...

Page 89

Creating Custom Paper Types
Phaser® 8560 Color Printer 3-59
Creating Custom Paper Types
Using CentreWare IS, you can create your own cu stom paper type with specific settings that 
you can reuse for routine print jo bs, such as, monthly reports. Access these custom types in the 
printer driver, control panel, and CentreWare IS. 
To create custom paper types:
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s  Address field (http://xxx.xxx.xxx.xxx).
3. Click  Properties .
4....

Page 90

Phaser® 8560 Color Printer4-1
This chapter includes:
■Controlling the Quality of Your Prints 
on page 4-2
■Solving Print-Quality Problems on page 4-6
Print Quality
Downloaded From ManualsPrinter.com Manuals 
Start reading Xerox Phaser 8560DT User Manual

Related Manuals for Xerox Phaser 8560DT User Manual

All Xerox manuals