Xerox Phaser 8560DN User Manual
Here you can view all the pages of manual Xerox Phaser 8560DN User Manual. The Xerox manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 101
Phaser® 8560 Color Printer5-1 This chapter includes: ■Maintenance and Cleaning on page 5-2 ■Ordering Supplies on page 5-15 ■Moving and Repacking the Printer on page 5-17 See also: Maintenance video tutorials at www.xerox.com/office/ 8560Psupport Replacing supplies video tutorials at www.xerox.com/office/8560Psupport Maintenance Downloaded From ManualsPrinter.com Manuals
Page 102
Maintenance and Cleaning Phaser® 8560 Color Printer 5-2 Maintenance and Cleaning This section includes: ■Routine Maintenance on page 5-2 ■Cleaning the Paper Release Blade on page 5-10 ■Cleaning the Maintenance Kit Wiper Blade on page 5-12 ■Cleaning the Outside of the Printer on page 5-14 See also: User Safety on page A-1 Routine Maintenance Your system needs little maintenance to keep it producing quality prints. Add ink, empty the waste tray, and replace the maintenance kit when needed to keep...
Page 103
Maintenance and Cleaning Phaser® 8560 Color Printer 5-3 To load ink: 1. Remove paper from the output tray. 2. Open the top cover. 3. Locate the ink-loading bin that is low. A la bel above each bin indicates the ink stick color and shape for that bin. 8560p-097 8560p-019 Downloaded From ManualsPrinter.com Manuals
Page 104
Maintenance and Cleaning Phaser® 8560 Color Printer 5-4 4. Remove the ink stick from its packaging. Pl ace the ink stick into the opening of the appropriate ink-loading bin. Do not force the ink stick into the ink-loading bin. Each ink stick is uniquely shaped to fit into the correct ink-loading bin. 5. Close the top cover. Warming Up is displayed on the control panel until the printer is ready for printing. Note: To minimize ink waste and optimize perform ance, leave the printer on at all...
Page 105
Maintenance and Cleaning Phaser® 8560 Color Printer 5-5 Emptying the Waste Tray Empty the waste tray when the control panel disp lays a message stating that the waste tray is full. Warning: The printer’s interior may be hot. Do not touch the hot surfaces! To empty the waste tray: 1. Open the side door. 2. Pull the waste tray (labeled B) completely out of the printer. Warning: The waste tray may be hot; handle it carefully. Note: The waste tray may be locked if the printer is in a warm-up cycle or...
Page 106
Maintenance and Cleaning Phaser® 8560 Color Printer 5-6 3. Empty the waste tray in a waste container. The ink is non-toxic and can be discarded as normal office waste. Note: The waste tray must be out of the printe r for more than five seconds or you will continue to receive a Waste Tray Full message on the control panel. 4. Insert the waste tray into the printer and pu sh it completely into the waste tray slot. 8560p-036 8560p-068 Downloaded From ManualsPrinter.com Manuals
Page 107
Maintenance and Cleaning Phaser® 8560 Color Printer 5-7 5. Close the side door. Caution: Do not attempt to reuse the waste ink in th e printer; it can damage the printer. This damage is not covered under the printer warranty. 8560p-038 Downloaded From ManualsPrinter.com Manuals
Page 108
Maintenance and Cleaning Phaser® 8560 Color Printer 5-8 Replacing the Maintenance Kit The maintenance kit contains a maintenance rolle r that keeps the surface of the imaging drum clean and oiled. Note: Order a new maintenance kit when the cont rol panel displays a message that the maintenance kit is low. Replace it when th e control panel prompts you to replace the maintenance kit. To order a replacement maintenanc e kit, contact your local reseller or go to www.xerox.com/office/8560Psupplies ....
Page 109
Maintenance and Cleaning Phaser® 8560 Color Printer 5-9 3. Insert the replacement maintenance kit and pu sh it completely into the maintenance kit slot. Follow the illustrated instructions in cluded with the maintenance kit for full installation and dis posal information. 4. Close the side door. 8560p-038 Downloaded From ManualsPrinter.com Manuals
Page 110
Maintenance and Cleaning Phaser® 8560 Color Printer 5-10 Cleaning the Paper Release Blade To clean the paper release blade: 1.Open the exit cover. 2. Lift the lower paper guide toward the front of the printer. 8560p-096 8560p-121 Downloaded From ManualsPrinter.com Manuals