Xerox Phaser 7760GX User Manual

Printing on Specialty Media
Phaser® 7760 Color Laser Printer 3-46
Printing Custom Size Paper from Tray 2
1.Open Tray 2.
2. Insert custom size paper in Tray 2 an d adjust the guides to fit the paper.
3. When the control panel prompts  you to confirm the type and size of paper in the tray:
a. Select 
Change setup, and then press the  OK button.
b. Select the appropriate paper type, and then press the  OK button.
c. Select 
New Custom Size, and then press the  OK button.
d. If the measurement shown for the...

Printing on Specialty Media
Phaser® 7760 Color Laser Printer 3-47
Turning Off Custom Size Printing for Tray 2
Note:When you have finished using custom paper in Tray 2, select Auto-Sensed as the 
paper size when you load the standard-size paper. The tray guides are then used by the printer 
to determine the paper size in the tray.
On the control panel:
1. Select 
Printer Setup, and then press the  OK button.
2. Select 
Paper Handling Setup, and then press the  OK button.
3. Select 
Tr a y  2  S e t u p,...

Choosing Output Options
Phaser® 7760 Color Laser Printer 3-48
Choosing Output Options
This section includes:
■Offsetting Output  on page 3-49
■Stapling Output on page 3-50
■Using the Hole Puncher  on page 3-51
Output Trays
The printer has one output tray lo cated on the top of the printer. If a finisher is installed the 
following output options are available:
■Top output tray (horizontal transport)
■Finisher upper output tray
■Finisher stacker output tray
■Finisher booklet output tray
Note: If you...

Choosing Output Options
Phaser® 7760 Color Laser Printer 3-49
Offsetting Output
When you send output to the top  output tray or the finisher stacker tray, the copies or jobs can 
be offset in the tray. Offsetting sh ifts the pages in the output tray for each job or each copy of a 
collated job.
Note: If a finisher is installed, the t op output tray no longer offsets.
Selecting Offsetting from the Printer Driver
To select offsetting for a specific print job:
Operating System Steps
Windows 2000, 
Windows...

Choosing Output Options
Phaser® 7760 Color Laser Printer 3-50
Stapling Output
If your printer has a finisher, you can have the printer staple sets of up to 50 sheets of 75 g/m2 
(20  lb. Bond Paper). 
If your printer has a finisher with the booklet maker, you can have the printer saddle staple and 
fold sets of up to 15 sheets to make a booklet.  It can also fold sets of up to 5 sheets without 
stapling. 
Use the following guidelin es when stapling paper:
■To be stapled, the sheets of paper must have a...

Choosing Output Options
Phaser® 7760 Color Laser Printer 3-51
Selecting Stapling From  the Printer Driver
To select a stapling option for a specific print job:
Using the Hole Puncher
If your printer has a finisher, you can have th e printer punch holes in the paper after it is 
printed. Your finisher will have either  the 3-hole or the 2-/4-hole punch options. 
Note: Hole punching is not availa ble when printing booklets.
Use the following guidelines when  selecting hole punching options:
■The edge of...

Choosing Output Options
Phaser® 7760 Color Laser Printer 3-52
Selecting Hole Punching from the Printer Driver
To select a hole punching option for a specific print job:
Operating System Steps
Windows 98 SE, 
Windows 2000, 
Windows XP, 
Windows Server 2003 1.
Select the  Output Options  tab.
2. Select the number of holes from the  Hole Punching drop-down list.
3. Select  Finisher Output Tray  from the Paper Destination  drop-down 
list.
Mac OS 9 or 
Mac OS X, version 
10.2 and higher 1.
In the  Print...

Phaser® 7760 Color Laser Printer4-1
.
This chapter includes:
■Controlling the Quality of Your Prints  on page 4-2
■Solving Print-Quality Problems on page 4-5
Print Quality
Downloaded From ManualsPrinter.com Manuals 

Controlling the Quality of Your Prints
Phaser® 7760 Color Laser Printer 4-2
Controlling the Quality of Your Prints
This chapter includes:
■Selecting a Print-Quality Mode  on page 4-2
■Adjusting Color on page 4-3
See also:  Advanced Features Guide  at www.xerox.com/office/7760support
Selecting a Print-Quality Mode
The print-quality mode and TekColor correction directly control the  quality of your prints. The 
print-quality mode and paper type directly co ntrol the print speed. You can change these...

Controlling the Quality of Your Prints
Phaser® 7760 Color Laser Printer 4-3
To select the print-quality mode in a supported driver:
Adjusting Color
The TekColor correction options provide simulations of different color devices. 
Automatic is 
the default correction fo r general image processing. See the  following table to determine what 
option you want to use.
Operating System Steps
Windows 98 SE  1.Select the  Setup tab.
2. Select a print-quality mode.
Windows 2000, 
Windows XP, or 
Windows Server...