Xerox Phaser 7760GX User Manual

Printing on Specialty Media
Phaser® 7760 Color Laser Printer 3-36
Printing Envelopes
Envelopes can be printed from Tray 1 (MPT) only. 
See also: 
Paper Sizes and Weights for Tray 1 (MPT)  on page 3-6
Guidelines
■Use only paper envelopes specified in the Supported Paper Sizes and Weights table. 
Successful envelope printing is highly depe ndent on the quality and construction of the 
envelopes. Use envelopes made specifically for laser printers.
■It is recommended that you maintain cons tant temperatures...

Printing on Specialty Media
Phaser® 7760 Color Laser Printer 3-37
Printing Envelopes from Tray 1 (MPT)
1.Open Tray 1 (MPT).
2. Insert the envelopes into Tray 1 (MPT), and ad just the paper guides to match the size of 
the envelopes.
■Place the side to be printed  facedown.
■Place the flap  faceup and entering the printer first.
3. When the control panel prompts  you to confirm the type and size of paper in the tray:
a. Select 
Change setup, and then press the  OK button.
b. Select 
Envelope as the paper...

Printing on Specialty Media
Phaser® 7760 Color Laser Printer 3-38
Printing Labels
Labels can be printed from Tray 1 (MPT) only. 
To order paper, transparencies, or other specia lty media, contact your local reseller or go to 
www.xerox.com/office/supplies
.
See also:  Paper Sizes and Weights for Tray 1 (MPT)  on page 3-6
Guidelines
■Do not use vinyl labels.
■Print only on one side of the sheet of labels.
■Do not use any sheet where labels are missing; it may damage the printer.
■Store unused labels flat...

Printing on Specialty Media
Phaser® 7760 Color Laser Printer 3-39
Printing Labels from Tray 1 (MPT)
1.Open Tray 1 (MPT).
2. Load the labels in Tray 1 (MPT).
■Insert the label sheets  long-edge feed.
■Place the labels sheets  facedown.
■Place the top of the page towards the  front of the printer.
3. Adjust the paper guides to ma tch the size of the sheets.
4. When the control panel prompts  you to confirm the type and size of paper in the tray:
a. Select 
Change setup, and then press the  OK button.
b....

Printing on Specialty Media
Phaser® 7760 Color Laser Printer 3-40
Printing Glossy Paper
Glossy paper can be printed from any tr ay within the following weight range:
■Thin Glossy Paper: 120–169 g/m2 (50–60 lb. Cover)
■Thick Glossy Paper: 170–220 g/m2 (65–80 lb. Cover)
Note: Glossy paper should be printed on one side only.
To order paper, transparencies, or other specia lty media, contact your local reseller or go to 
www.xerox.com/office/supplies
.
Guidelines
■Do not open sealed packages of glossy pape...

Printing on Specialty Media
Phaser® 7760 Color Laser Printer 3-41
Printing Glossy Paper from Tray 1 (MPT)
1.Open Tray 1 (MPT).
2. Fan the glossy paper to release sheets that may be stuck together.
7760-027
7760-106
Downloaded From ManualsPrinter.com Manuals 

Printing on Specialty Media
Phaser® 7760 Color Laser Printer 3-42
3.
Insert the glossy paper into Tray 1.
■Use long-edge feed (with the long edge en tering the printer first) for Letter- and 
A4- size paper.
■Use short-edge feed (with the short edge  entering the printer first) for Tabloid, 
Tabloid Extra, A3, and SRA3 paper.
■For single-sided printing, pl ace the side to be printed facedown.
■For automatic 2-sided printing, place side one  faceup.
Note: Do not load glossy pape r above the transparency...

Printing on Specialty Media
Phaser® 7760 Color Laser Printer 3-43
Printing Glossy Paper from Trays 2-5
1.Pull out the tray.
2. Fan the paper to release sheets that are stuck together.
3. Insert glossy paper with the long e dge along the left side of the tray. 
■For single-sided printing, place the side to be printed faceup.
■For automatic 2-sided printing place side one  facedown.
Note: Do not load glossy pape r above the transparency fill line inside the tray. 
Overloading the tray may cause jams.
4....

Printing on Specialty Media
Phaser® 7760 Color Laser Printer 3-44
5.
Push the tray all the way back into the printer.
6. When the control panel prompts  you to confirm the type and size of paper in the tray:
a. Select 
Change setup, and then press the  OK button.
b. Select 
Thin Glossy Paper or Thick Glossy Paper (for paper over 170 g/m2) as the 
paper type, and then press the  OK button.
c. If you loaded the glossy paper in Tray 2,  select the appropriate paper size, and then 
press the  OK button....

Printing on Specialty Media
Phaser® 7760 Color Laser Printer 3-45
Printing Custom Size Paper
In addition to the wide variety of standard paper sizes that you can use for printing, you can 
also print on custom size paper  within the following dimensions.
Printing Custom Size Paper from Tray 1 (MPT)
1.Open Tray 1 (MPT).
2. Insert custom size paper in Tray 1 (MPT ) and adjust the guides to fit the paper.
3. When the control panel prompts  you to confirm the type and size of paper in the tray:
a. Select...