Xerox Phaser 750DX User Manual

							10Phaser  750 Color Printer 
Paper Tips
Caution
Do not use any media designed for inkjet printers, especially 
inkjet coated paper and inkjet transparencies. Inkjet media is 
coated with a substance that will damage the fuser. Tektronix 
does not furnish warranty service for damage or malfunction 
caused by the use of non-Tektronix supplies or consumables. 
Always use Tektronix media that has been specially designed 
for use with Tektronix Laser Printers.
nTo prevent Jam-Wrong Media errors, load only paper in the PAPER 
tray and Tektronix transparencies in the 
TRANSPARENCY tray or 
Multi-Purpose tray.
nIf you have the Automatic Duplex/Lower Tray Assembly:
nInsert the Duplex Unit only in the upper (a) slot.
nInsert the TRANSPARENCY tray only into the middle (b) tray 
slot.
nInsert the PAPER tray into the middle (b) or lower (c) slot.
nAlways use the Multi-Purpose Tray (d) for specialty media. 
nWhen loading the Multi-Purpose Tray, the front panel 
automatically prompts you to select the media type and media 
size.
a
b
c d
LegalPaper
A/LetterPaper
Duplex
0236-06
Paper Tips
Downloaded From ManualsPrinter.com Manuals 
						

							User Guide11
nWhen you select a media tray by location (Upper, Middle, Lower, 
Multi-Purpose Tray), the printer picks from that tray, regardless 
of the trayÕs media type or size. 
nAlways keep media in a sealed package to avoid the effects of 
humidity, which can affect print quality.
Letterhead
nFor printing letterhead: 
nIn the PAPER tray put this material face-down.
nIn the Multi-Purpose Tray put this material face-up.
 
Downloaded From ManualsPrinter.com Manuals 
						

							12Phaser  750 Color Printer 
Supported page sizes and image area
The printer supports five media sizes, which you select in the Print 
screen (using a supported printer driver).
Margins
Media Page size Print area Top / 
BottomSides
1 Letter
8.5 x 11 in. 8.21 x 10.56 in. .22 in. .14 in.
2A4210 x 297 mm 200 x 287 mm 5 mm 4.8 mm
3 Legal8.5 x 14 in. 8.2 x 13.5 in. .23 in. .14 in.
4 Executive7.25 x 10.5 in. 6.93 x 10.31 in. .22 in. .15 in.
5 #10 
Envelope4.13 x 9.5 in.
(104.8 x 
241.3 mm)3.8 x 9.2 in.
(96.5 x 233.7 mm).16 in.
(4.1 mm).14 in.
(3.6 mm)
2345 1
0632-57
Downloaded From ManualsPrinter.com Manuals 
						

							User Guide13
Paper and Transparency Trays
Paper Tray  
n250-sheet capacity
n60 - 90 g/m2 (16 - 24 lb.)
nUse Tektronix Premium Color Printing Paper or Premium Laser 
Bond Paper for best results.
nPaper only. Do not load transparencies.
Note
Load only laser paper in the paper trays. Specialty papers 
such as Tektronix Glossy Coated Paper, Tektronix Premium 
Cover Paper, envelopes, and Tektronix Laser Labels must be 
loaded in the Multi-Purpose Tray.
Do not use transparency in the P
APER tray. This will result in 
a Jam-Wrong Media error.
PAPERA4
0632-01
PAPER
A/LetterPAPER
A4PAPER
Legal
Trays
Downloaded From ManualsPrinter.com Manuals 
						

							14Phaser  750 Color Printer 
Transparency Tray  
nUse only Tektronix transparencies. See page 1 for supplies 
ordering information. For information on Tektronix  
transparencies, visit the Tektronix web site: 
www.tek.com/Color_Printers/ products/supplies/trans/index.html
nInstall the transparency tray only in the printerÕs upper or middle  
tray slots. If this tray is installed in the lower tray slot, a front 
panel error occurs that stops the print job. The transparency tray 
must then be moved to the upper or middle tray slot.
Caution Use of non-Tektronix transparencies can damage printer 
components or produce poor image quality. 
Do not load paper in the Transparency tray, this will result in  
a Jam-Wrong Media  error.
nTektronix transparencies
nUse only Premium or Standard Tektronix transparencies (see 
page 1 for supplies ordering information)
n100-sheet capacity
TRANSPARENCYA4
0632-02
TRANSPARENCY
A/LetterTRANSPARENCY A4
 
Trays
Downloaded From ManualsPrinter.com Manuals 
						

							User Guide15
Loading Paper or Transparency Tray
Note
Place the side to be printed (for example, letterhead paper) 
face-down under the hooks.
1.Push down on the trayÕs metal plate until it clicks, locking it in 
place.    
2.Fan the media to release sheets that are stuck together.    
PAPERA40632-08
0632-09
Downloaded From ManualsPrinter.com Manuals 
						

							16Phaser  750 Color Printer 
3.Place the media in the tray under the hooks.   
nLetterhead: Load this material face-down under the tray 
hooks.
nTransparencies: Place the Tektronix logo strip face-up under 
the transparency tray hooks. Use Tektronix transparencies 
only.  
4.Tray capacity:
a.Paper tray 250 sheets
b.Transparency tray 100 sheets 
5.Insert the tray.
nFor tray placement guidelines, see page 10. Caution
Keep the media level below the indicator on the trayÕs 
label; otherwise, the printer may jam or be damaged.
TRANSPARENCYA4
MAXIMUM TRAY LEVEL
0632-10
Downloaded From ManualsPrinter.com Manuals 
						

							User Guide17
Multi-Purpose Tray
Overview
Always use the Multi-Purpose Tray for speciality media; it supports 
the following media types:  
Supported Media Tray capacity Media thickness 
switch
Paper and Paper 2nd Side
75-105 g/m
2, (20-28 lb.)100 sheets Thin
Tektronix Transparency Film 50 sheets Normal
Tektronix Glossy Coated Paper 30 sheets Normal
Heavy paper:
nCover Stock
n 120-163 g/m2), (40- 60 lb.)
nIndex Stock
n120-163 g/m2, (60- 90 lb.)
nCard Stock
n 120-163 g/m2, (32- 40 lb.)30 sheets Thick
Tektronix Color Laser Labels 30 sheets Thick
#10 Envelopes 10 envelopes Thick
Multi-Purpose Tray
Downloaded From ManualsPrinter.com Manuals 
						

							18Phaser  750 Color Printer 
Note
For the best coverage when using laser paper heavier than 
105 g/m
2 (28 lb.) in the Multi-Purpose Tray, select Heavy 
Paper as the media type.
If the printer experiences frequent media jams at the 
Multi-Purpose Tray, move the Media Thickness Switch to a 
thicker setting. If the printer experiences frequent 
double-feed errors at the Multi-Purpose Tray, move the 
Media Thickness Switch to a thinner setting.
 
 
Note
The printer prompts you for the paper type and size. If the 
wrong media is selected, the printerÕs front panel displays a 
Jam-Wrong Media message.
Thin Thick
Normal
33100-68
Multi-Purpose Tray
Downloaded From ManualsPrinter.com Manuals 
						

							User Guide19
Loading the Multi-Purpose Tray
1.Pull out the slide and adjust the guides for the width of the media. 
2.Adjust the Media Thickness switch for the media you are using 
(see page 17). 
0632-11
Thin Thick
Normal
33100-68
Downloaded From ManualsPrinter.com Manuals