Xerox Phaser 6360N User Manual

Selecting Printing Options
Phaser® 6360 Color Laser Printer
3-22
Mac OS X, Version 
10.2 and 10.3Copies & Pages■Copies
■Pages
Layout
■Pages per sheet
■Layout direction
■Border
■Two-sided printing
Paper Handling
■Reverse page order
■Print (all, odd, even)
ColorSync
■Color matching
Cover Page
■Cover pages
Paper Feed
■Paper source
Job Types
■Secure prints, personal prints, proof prints, 
and saved prints
Image Quality
■Print quality
■RGB color corrections neutral grays
■Image smoothing
Printer Features...

Printing on Both Sides of the Paper
Phaser® 6360 Color Laser Printer
3-23
Printing on Both Sides of the Paper
This section includes:
■Automatic 2-Sided Printing Guidelines on page 3-23
■Binding Edge Options on page 3-24
■Selecting 2-Sided Printing on page 3-24
Note:For information about manual two-sided printing, go to the Online Support Assistant at 
www.xerox.com/office/6360support
.
Automatic 2-Sided Printing Guidelines
Automatic 2-sided printing is available from the Phaser 6360DN, 6360DT, and 6360DX...

Printing on Both Sides of the Paper
Phaser® 6360 Color Laser Printer
3-24
Binding Edge Options
When you use the printer driver to select 2-sided printing, also select the binding edge, which 
determines how the pages turn. The actual outcome depends on the orientation (portrait or 
landscape) of images on the page, as displayed in the following illustrations.
Selecting 2-Sided Printing
To select automatic 2-sided printing:
1.Insert paper in the tray. For more information, see Loading Paper on page 3-9....

Printing on Specialty Media
Phaser® 6360 Color Laser Printer
3-25
Printing on Specialty Media
This section includes:
■Printing Transparencies on page 3-25
■Printing Envelopes on page 3-31
■Printing Labels on page 3-34
■Printing Glossy Paper on page 3-39
■Printing Custom Size Paper on page 3-44
Printing Transparencies
Transparencies can be printed from all trays. They should be printed on one side only. For best 
results, use only recommended Xerox transparencies.
To order paper, transparencies, or other...

Printing on Specialty Media
Phaser® 6360 Color Laser Printer
3-26
Printing Transparencies from Tray 1 (MPT)
1.Open Tray 1 (MPT) by pulling out on the handle.
2.Pull out the tray extension, and open the paper guides.
3.Fan the transparencies to release sheets that are stuck together.
6360-046
6360-062
6360-047 
Downloaded From ManualsPrinter.com Manuals 

Printing on Specialty Media
Phaser® 6360 Color Laser Printer
3-27 4.Insert the transparencies into Tray 1 (MPT), and adjust the paper guides to fit the 
transparencies. Do not load more than 25 transparencies.
5.On the control panel, select the transparency type and size:
a.Select 
Change setup, and then press the OK button.
b.Select 
Transparency, and then press the OK button. 
c.Select the transparency size, and then press the OK button.
6.In the printer driver, select either Transparency as the paper...

Printing on Specialty Media
Phaser® 6360 Color Laser Printer
3-28
Printing Transparencies from Trays 2–5
1.Pull the tray out of the printer.
2.If necessary, open the paper guides:
■Squeeze the green tab on the length guide, and then slide it back. The guide clicks into 
place.
■Slide the green side guides outward.
3.Fan the transparencies to release sheets that are stuck together.
6360-020
6360-021
6360-047 
Downloaded From ManualsPrinter.com Manuals 

Printing on Specialty Media
Phaser® 6360 Color Laser Printer
3-29 4.Insert the transparencies into the tray. 
Caution:Do not load transparencies above the fill line indicated on the paper tray. 
Overloading the tray may cause jams. In the following illustration, 2 indicates the 
maximum fill line for transparencies, labels, glossy paper, and thin card stock.
5.If necessary, press the guides inward to fit the transparencies.
Note:When the paper guides are adjusted correctly, there may be a small space...

Printing on Specialty Media
Phaser® 6360 Color Laser Printer
3-30 6.Insert the tray into the tray slot, and push the tray completely into the printer.
7.On the control panel, select the transparency type:
a.Select 
Change setup, and then press the OK button.
b.Select 
Transparency, and then press the OK button. 
8.In the printer driver, select either Tr a n s p a r e n c y as the paper type or the appropriate tray 
as the paper source.
6360-053
Downloaded From ManualsPrinter.com Manuals 

Printing on Specialty Media
Phaser® 6360 Color Laser Printer
3-31
Printing Envelopes
Envelopes can be printed only from Tray 1 (MPT). 
See also: 
Paper Sizes and Weights for Tray 1 (MPT) on page 3-7
Guidelines
■Use only paper envelopes specified in the Supported Paper Sizes and Weights table. 
Successful envelope printing is highly dependent on the quality and construction of the 
envelopes. Use envelopes made specifically for laser printers.
■It is recommended that you maintain constant temperatures and...