Xerox Phaser 6130 User Manual
Here you can view all the pages of manual Xerox Phaser 6130 User Manual. The Xerox manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 51
Setting Paper Types and Sizes Phaser® 6130 Printer 4-7 Setting Paper Types and Sizes Setting the Paper Tray When loading paper in the paper tray, set the paper size and type on the control panel when printing. Note: When you set select None from the Paper Type dropdown in the PostScript driver, printing will default to the control panel settings. Printing will be performed only when the settings for the paper size and type configured on the print driver match the settings on the control panel. When...
Page 52
Loading Paper Phaser® 6130 Printer 4-8 Loading Paper This section includes: ■Loading Paper in the Paper Tray on page 4-8 ■Loading Paper in the Manual Feed Slot on page 4-12 Loading Paper in the Paper Tray Use the paper tray for a wide range of media including: ■Plain paper ■Card stock ■Labels ■Glossy paper ■Specialty media including business cards, postcards, trifold brochures, and weatherproof paper ■Pre-printed paper (paper already printed on one side) ■Custom size paper See also: About Paper on...
Page 53
Loading Paper Phaser® 6130 Printer 4-9 Make sure of the following points to avoid any troubles during printing. ■Do not load different types of paper at the same time. ■Use high quality paper for laser printers to print at high quality. See About Paper on page 4-5. ■Do not remove or add paper to the tray when printing, or if there is any paper still in the tray. Doing so may cause a paper jam. ■Do not put any objects other than paper on the tray. Also, do not push or force down the paper tray. ■Always...
Page 54
Loading Paper Phaser® 6130 Printer 4-10 3.Slide the width guides to the edge of the tray. The width guides should be fully extended. 4.Insert all media faceup and top edge first into the paper tray. Note: Do not force the paper. 6130-059 6130-052 Downloaded From ManualsPrinter.com Manuals
Page 55
Loading Paper Phaser® 6130 Printer 4-11 5.Slide the width guides until they rest lightly against the edge of the paper stack. Note: Be careful not to bend the paper. When Size Mismatch is set to Use Printer Settings in the PostScript driver, you need to set the paper type and size settings for the tray on the control panel in advance. See also: Setting Paper Types and Sizes on page 4-7 6130-052 Downloaded From ManualsPrinter.com Manuals
Page 56
Loading Paper Phaser® 6130 Printer 4-12 Loading Paper in the Manual Feed Slot Use the Manual Feed Slot for a wide range of media including: ■Plain paper ■Thin card stock ■Glossy paper ■Labels ■Envelopes See also: Printing on Specialty Media on page 4-20 Loading Paper in the Manual Feed Slot This section describes how to feed paper in the manual feed slot. Make sure of the following points to avoid any troubles during printing. ■Use several sheets of the media when adjusting the paper width guides....
Page 57
Loading Paper Phaser® 6130 Printer 4-13 2.Open the output tray to hold the printed sheets. 3.Place the print media into the slot with the print side facedown and the top of the sheet entering the printer first. 6130-021 6130-051 Downloaded From ManualsPrinter.com Manuals
Page 58
Selecting Printing Options Phaser® 6130 Printer 4-14 Selecting Printing Options This section includes: ■Selecting Printing Preferences (Windows) on page 4-14 ■Selecting Options for an Individual Job (Windows) on page 4-15 ■Selecting Options for an Individual Job (Macintosh) on page 4-17 Selecting Printing Preferences (Windows) Printer preferences control all of your print jobs, unless you override them specifically for a job. To select printer preferences: 1.Select one of the following options:...
Page 59
Selecting Printing Options Phaser® 6130 Printer 4-15 Selecting Options for an Individual Job (Windows) If you want to use special printing options for a particular job, change the driver settings before sending the job to the printer. For example, if you want to use Enhanced print-quality mode for a particular graphic, select this setting in the driver before printing that job. 1.With the desired document or graphic open in your application, access the Print dialog box. 2.Select the Phaser 6130...
Page 60
Selecting Printing Options Phaser® 6130 Printer 4-16 See the following table for specific PCL printing options: Note: If your driver does not display the options listed in the table above, see Enabling Options on page 7-11 for more information. PCL Printing Options for Windows Operating Systems Operating System Driver Tab Printing Options Windows Vista, Windows 2000, Windows XP, or Windows Server 2003Paper/Output tab ■Job Type ■Document size, paper type, and tray selection ■Feed orientation ■Saved...