Xerox Phaser 6130 User Manual

Print-Quality Problems
Phaser® 6130 Printer
6-5
Partial blanks, creased 
paper, or blotted 
printingThe paper is damp.
Replace the paper.
The paper is outside the recommended specification range.
Replace the paper with a recommended size and type. See About Paper 
on page 4-5.
The transfer unit, or fuser, is not installed correctly.
Reinstall the transfer unit and/or fuser.
The toner cartridges are not Xerox toner cartridges.
Verify that the toner cartridges (C/M/Y/K) meet specifications, and replace 
if...

Color Registration
Phaser® 6130 Printer
6-6
Color Registration
Color registration can be adjusted by the printer automatically, or you can manually adjust it. 
Color registration should be adjusted any time the printer is moved.
Automatic Color Registration Adjustment
Use the following procedure to perform automatic color registration adjustment.
1.Press the Menu button to display the 
Menu screen.
2.Press the Up Arrow or Down Arrow button until 
Admin Menu is displayed, and then 
press the Forward Arrow...

Color Registration
Phaser® 6130 Printer
6-7
Determining Values
From the lines to the right of the Y (yellow), M (magenta), and C (cyan) pattern, find the 
values of the straightest lines.
When “0” is the value nearest the straightest line, you do not need to adjust the color 
registration. When the value is not “0”, follow the procedure outlined in “Entering Values”.
Note: You can also use the densest colors of the grid to find the straightest lines. The colors 
printed at the highest density are those...

Color Registration
Phaser® 6130 Printer
6-8
Enabling/Disabling Automatic Color Registration
Use the following procedure to enable/disable automatic color registration when a new toner 
cartridge is installed.
1.Press the Menu button to display the 
Menu screen.
2.Press the Up Arrow or Down Arrow button until 
Admin Menu is displayed, and then 
press the Forward Arrow or OK button.
3.Press the Up Arrow or Down Arrow button until 
Maintenance Mode is displayed, and 
then press the Forward Arrow or OK...

Phaser® 6130 Printer
7-1 This chapter includes:
 ■Paper Jams on page 7-2
■Problems With the Printer on page 7-8
■Control Panel Error Messages on page 7-12
■Getting Help on page 7-16
See also: 
Troubleshooting video tutorials at www.xerox.com/office/6130support
Print-Quality Problems on page 6-2
Troubleshooting
Downloaded From ManualsPrinter.com Manuals 

Paper Jams
Phaser® 6130 Printer
7-2
Paper Jams
This section includes:
■Preventing and Clearing Paper Jams on page 7-2
■Paper Jams in the Paper Tray on page 7-3
■Paper Jams at the Fuser on page 7-6
See also: 
User Safety on page 1-2
Preventing and Clearing Paper Jams
To reduce the occurrence of paper jams, follow the guidelines and instructions in Printing 
Basics on page 4-1. It includes information about supported paper and media, guides for 
usage, and instructions for properly loading paper in the...

Paper Jams
Phaser® 6130 Printer
7-3
Paper Jams in the Paper Tray
Follow this procedure to remove paper jammed in the tray.
1.Pull the jammed paper out of the paper tray, and remove any remaining paper from the 
tray.
2.Close the paper tray.
3.Push the button and open the front cover.
Warning: Some components inside the printer, such as the fuser and surrounding area, 
are hot and can cause burns.
6130-028
6130-015
Downloaded From ManualsPrinter.com Manuals 

Paper Jams
Phaser® 6130 Printer
7-4 4.Carefully remove any jammed paper in the printer. Confirm that there are no scraps of 
paper left inside.
Caution: Prolonged exposure to light may damage the imaging unit.
5.Close the front cover.
6130-098
6130-032
Downloaded From ManualsPrinter.com Manuals 

Paper Jams
Phaser® 6130 Printer
7-5 6.Remove the tray from the printer, and then carefully pull out any jammed paper remaining 
inside the printer.
7.Insert the tray into the printer and push until it stops.
Caution: Do not use excessive force on the tray. Doing so could damage the tray or the inside 
of the printer.
6130-043
6130-027
Downloaded From ManualsPrinter.com Manuals 

Paper Jams
Phaser® 6130 Printer
7-6
Paper Jams at the Fuser
1.Press the button and open the front cover.
2.Lift the levers at both ends of the fuser and remove the jammed paper. If the paper is torn, 
remove any scraps of paper remaining inside the printer.
Warning: Some components inside the printer, such as the fuser and surrounding area, 
are hot and can cause burns.
Caution: Prolonged exposure to light may damage the imaging unit.
6130-015
6130-046
Downloaded From ManualsPrinter.com Manuals