Xerox Phaser 3635mfpx Manual

3Copy 
Xerox Phaser 3635 User Guide45
2-Sided Copying
Double-sided copies can be made automatically from one or two-sided originals.
1 1 Sided: Use this option for 1 sided originals when 1 sided copies are required.
1 2 Sided: Use this option for 1 sided originals when 2 sided copies are required.
1 2 Sided, Rotate Side 2: This option produces 2-sided copies from 1 sided 
originals and rotates 180 degrees every second side image. Use this option to 
create documents which can be read in a “head to toe”...

3Copy 
46Xerox Phaser 3635 User Guide
Image Quality
The Image Quality tab provides copy features used for adjusting the appearance 
of the copy output.
Select any of the top level buttons to select a feature. To view all the options for a 
feature, select the option required. Multiple options can be selected for each copy 
job if required.
Original Type
Use this feature to enhance the quality of your output. 
The Original Type option is used to enhance the copy quality of the output based 
on the type of...

3Copy 
Xerox Phaser 3635 User Guide47
Background Suppression 
Use to automatically reduce or eliminate the dark background resulting from 
copying colored paper or newspaper originals. 

3Copy 
48Xerox Phaser 3635 User Guide
Layout Adjustment
The Layout Adjustment tab provides copy features used for adjusting the layout 
of the copy output.
Original Size
Select this feature to specify how the device determines the size of the original 
document.
Auto Detect: Use this option to allow the machine to automatically recognize the 
size of the originals being fed through the document feeder.
NOTE: Auto Detect is only available when there are originals detected on DADF. 

3Copy 
Xerox Phaser 3635 User Guide49
Presets: Use this option to specify the dimensions of the document scanning 
region when scanning from the document glass. There are several standard size 
dimensions that correspond to common document sizes and orientations.
Custom Size: Use this option to manually adjust the scanning dimensions using 
the scroll buttons.
Mixed Size Originals: Use this feature to copy a document containing mixed size 
originals. The originals must be the same width, for example 8.5...

3Copy 
50Xerox Phaser 3635 User Guide
Image Shift
This feature enables the position of the image on the page to be adjusted.
Off: The image position is not adjusted.
Auto Center: Automatically centres the scanned image on the output paper.
Margin Shift: Creates a binding edge for the document. The image can be 
adjusted up or down on the page and/or shifted to the right or left. Use the up/
down and left/right scroll buttons to adjust the amount of shift. The image can be 
shifted between 0 and...

3Copy 
Xerox Phaser 3635 User Guide51
All Edges (minimum): Erases equal amounts on all edges of the copies (minimum 
0.04").
All Edges (maximum): Erases equal amounts on all edges of the copies (maximum 
0.24"). 
Small Original Erase: Use to erase 0.25" (6 mm) from the edge of the
 document.
Hole Punch Erase: Use to erase hole punch marks from the left and right edge of 
the document. 

3Copy 
52Xerox Phaser 3635 User Guide
Output Format
The Output Format tab is used to produce different options for the finished output.
Booklet Creation
Use this feature to create booklets from a sequential set of either single-sided or 
double-sided originals. The machine prints 2-sided automatically, which, when 
folded, produces a booklet with all the pages in the correct sequence. The machine 
will also reduce and correctly position each image to fit on the selected paper. 
NOTE: Feed the originals...

3Copy 
Xerox Phaser 3635 User Guide53
Off: The feature is switched off.
On: Use this option to enable the Booklet Creation feature. There are two further 
options available, when Booklet Creation is enabled.
Covers
Use this feature to automatically add covers to your copied set using stock taken 
from a different tray than the copies. Covers must be the same size and orientation 
as the main body of the job.
Off: The feature is switched off.
Front and Back: Use this option to add both a front and back...

3Copy 
54Xerox Phaser 3635 User Guide
Transparency jobs will be delivered single-sided, and collated with no finishing. The 
quantity can only be set to 1 for this feature.
Select Blank to have the system insert a blank page between each transparency, 
or select Printed to insert a printed page between each transparency. Then choose 
the appropriate transparency and separator stock.
Transparency Supply: Select this button to specify the tray from which the 
machine needs to use the transparency stock....