Xerox Phaser 3600DN User Manual

							1
SOFTWARE SECTION 
C
ONTENTS
Chapter 1: INSTALLING PRINTER SOFTWARE IN WINDOWS
Installing Printer Software  ........................................................................................................  4
Installing Software for Local Printing  .................................................................................  4
Installing Software for Network Printing .............................................................................  7
Reinstalling Printer Software ...................................................................................................  10
Removing Printer Software  ..................................................................................................... 10
Chapter 2: USING SETIP (PHASER 3600/N, PHASER 3600/DN ONLY)
Installing SetIP  .....................................................................................................................  11
Using SetIP  ..........................................................................................................................  11
Chapter 3: BASIC PRINTING
Printing a Document  ..............................................................................................................  12
Printing to a file (PRN)   ..........................................................................................................  13
Printer Settings  .....................................................................................................................  13
Layout Tab  ..................................................................................................................  14
Paper Tab ....................................................................................................................  14
Graphics Tab  ...............................................................................................................  15
Extras Tab  ...................................................................................................................  16
Troubleshooting Tab  .....................................................................................................  17
Printer Tab  ..................................................................................................................  17
Using a Favorite Setting  ................................................................................................  17
Using Help ...................................................................................................................  18
Chapter 4: ADVANCED PRINTING
Printing Multiple Pages on One Sheet of Paper (N-Up Printing)  .....................................................  19
Printing Posters  .....................................................................................................................  20
Printing Booklets   ..................................................................................................................  20
Downloaded From ManualsPrinter.com Manuals 
						

							2
Printing on Both Sides of Paper  ............................................................................................... 21
Printing a Reduced or Enlarged Document ................................................................................  21
Fitting Your Document to a Selected Paper Size  .........................................................................  21
Using Watermarks  .................................................................................................................  22
Using an Existing Watermark  .........................................................................................  22
Creating a Watermark  ...................................................................................................  22
Editing a Watermark  .....................................................................................................  22
Deleting a Watermark  ...................................................................................................  22
Using Overlays  ......................................................................................................................  23
What is an Overlay? ......................................................................................................  23
Creating a New Page Overlay  .........................................................................................  23
Using a Page Overlay  ....................................................................................................  23
Deleting a Page Overlay  ................................................................................................  23
Chapter 5: USING WINDOWS POSTSCRIPT DRIVER
Printer Settings  .....................................................................................................................  24
Advanced ..................................................................................................................  24
Using Help ...................................................................................................................  24
Chapter 6: USING UTILITY APPLICATIONS
Using Printer Settings Utility ...................................................................................................  25
Using Onscreen Help  .....................................................................................................  25
Opening the Troubleshooting Guide  .........................................................................................  25
Changing the Status Monitor Program Settings  ..........................................................................  25
Chapter 7: SHARING THE PRINTER LOCALLY
Setting Up a Host Computer  ...................................................................................................  26
Setting Up a Client Computer  .................................................................................................. 26
Downloaded From ManualsPrinter.com Manuals 
						

							3
Chapter 8: USING YOUR PRINTER IN LINUX
Getting Started  .....................................................................................................................  27
Installing the Unified Linux Driver  ............................................................................................ 27
Installing the Unified Linux Driver  ...................................................................................  27
Uninstalling the Unified Linux Driver  ...............................................................................  28
Using the Unified Driver Configurator  .......................................................................................  29
Opening the Unified Driver Configurator  ..........................................................................  29
Printers Configuration  ...................................................................................................  29
Ports Configuration  .......................................................................................................  30
Configuring Printer Properties  ................................................................................................. 30
Printing a Document  ..............................................................................................................  31
Printing from Applications  ..............................................................................................  31
Printing Files  ................................................................................................................ 31
Chapter 9: USING YOUR PRINTER WITH A MACINTOSH
Installing printer driver for Macintosh  ....................................................................................... 32
Uninstalling the printer driver ..................................................................................................  32
Setting Up the Printer  ............................................................................................................  33
For a Network-connected Macintosh  ................................................................................  33
For a USB-connected Macintosh  .....................................................................................  33
Installable Options .................................................................................................................  34
Printing ................................................................................................................................  34
Printing a Document  .....................................................................................................  34
Changing Printer Settings  ..............................................................................................  35
Printing Multiple Pages on One Sheet of Paper  ..................................................................  36
Duplex Printing 
(
Phaser 3600/DN only)  ...........................................................................................................  37
Downloaded From ManualsPrinter.com Manuals 
						

							Installing Printer Software in Windows
4
1Installing Printer 
Software in Windows
This chapter includes:
• Installing Printer Software
• Reinstalling Printer Software
• Removing Printer Software
Installing Printer Software
You can install the printer software for local printing or network 
printing. To install the printer software on the computer, 
perform the appropriate installation procedure depending on 
the printer in use.
A printer driver is software that lets your computer 
communicate with your printer. The procedure to install drivers 
may differ depending on the operating system you are using.
All applications should be closed on your PC before beginning 
installation.
Installing Software for Local Printing
A local printer is a printer directly attached to your computer 
using the printer cable supplied with your printer, such as a USB 
or parallel cable. If your printer is attached to a network, skip 
this step and go to Installing Software for Network Printing on 
page 7.
You can install the printer software using the typical or custom 
method.
NOTE: If the “New Hardware Wizard” window appears during 
the installation procedure, click   in the upper right corner of 
the box to close the window, or click Cancel.
Typical Installation
This is recommended for most users. All components necessary 
for printer operations will be installed.
1Make sure that the printer is connected to your computer 
and powered on.
2Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation 
window appears.
If the installation window does not appear, click 
Start and 
then 
Run. Type X:\Setup.exe, replacing “X” with the 
letter which represents your drive and click 
OK.
If you use Windows Vista, click 
Start → All programs → 
Accessories → Run, and type X:\Setup.exe.
If the 
AutoPlay window appears in Windows Vista, click 
Run Setup.exe in Install or run program field, and 
click 
Continue in the User Account Control window.
3Click Install Software. 
4Select Typical installation for a local printer. Click 
Next.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing Printer Software in Windows
5
NOTE: If your printer is not already connected to the 
computer, the following window will appear.
• After connecting the printer, click 
Next.
• If you don’t want to connect the printer at this time, click 
Next, and No on the following screen. Then the installation 
will start and a test page will not be printed at the end of the 
installation.
• The installation window that appears in this User’s 
Guide may differ depending on the printer and 
interface in use.
5After the installation is finished, a window asking you to 
print a test page appears. If you choose to print a test 
page, select the checkbox and click 
Next.
Otherwise, just click 
Next and skip to step 7.
6If the test page prints out correctly, click Yes.
If not, click 
No to reprint it.
7Click Finish.
NOTE: After setup is complete, if your printer driver doesn’t 
work properly, reinstall the printer driver. See Reinstalling 
Printer Software on page 10.
Custom Installation
You can choose individual components to install.
1Make sure that the printer is connected to your computer 
and powered on.
2Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation 
window appears.
If the installation window does not appear, click 
Start and 
then 
Run. Type X:\Setup.exe, replacing “X” with the 
letter which represents your drive and click 
OK.
If you use Windows Vista, click 
Start → All programs → 
Accessories → Run, and type X:\Setup.exe.
If the 
AutoPlay window appears in Windows Vista, click 
Run Setup.exe in Install or run program field, and 
click 
Continue in the User Account Control window.
3Click Install Software. 
4Select Custom installation. Click Next.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing Printer Software in Windows
6
5Select your printer and click Next.
NOTE: If your printer is not already connected to the 
computer, the following window will appear.
• After connecting the printer, click 
Next.
• If you don’t want to connect the printer at this time, click 
Next, and No on the following screen. Then the installation 
will start and a test page will not be printed at the end of the 
installation.
• The installation window that appears in this User’s 
Guide may differ depending on the printer and 
interface in use.
6Select the components to be installed and click Next.
NOTE: You can change the desired installation folder by 
clicking [Browse].
7After the installation is finished, a window asking you to 
print a test page appears. If you choose to print a test 
page, select the checkbox and click 
Next.
Otherwise, just click 
Next and skip to step 9.
8If the test page prints out correctly, click Yes.
If not, click 
No to reprint it.
9Click Finish.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing Printer Software in Windows
7
Installing Software for Network Printing
When you connect your printer to a network, you must first 
configure the TCP/IP settings for the printer. After you have 
assigned and verified the TCP/IP settings, you are ready to 
install the software on each computer on the network.
You can install the printer software using the typical or custom 
method.
Typical Installation
This is recommended for most users. All components necessary 
for printer operations will be installed.
1Make sure that the printer is connected to your network 
and powered on. For details about connecting to the 
network, see the supplied printer’s User’s Guide.
2Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation 
window appears.
If the installation window does not appear, click 
Start and 
then 
Run. Type X:\Setup.exe, replacing “X” with the 
letter which represents your drive and click 
OK.
If you use Windows Vista, click 
Start → All programs → 
Accessories → Run, and type X:\Setup.exe.
If the 
AutoPlay window appears in Windows Vista, click 
Run Setup.exe in Install or run program field, and 
click 
Continue in the User Account Control window.
3Click Install Software. 
4Select Typical installation for a network printer. Click 
Next.
5The list of printers available on the network appears. Select the 
printer you want to install from the list and then click 
Next. 
• If you do not see your printer on the list, click Update to 
refresh the list, or select 
Add TCP/IP Port to add your 
printer to the network. To add the printer to the network, 
enter the port name and the IP address for the printer.
To verify your printer’s IP address or the MAC address, print 
a Network Configuration page.
• To find a shared network printer (UNC Path), select 
Shared 
Printer [UNC]
 and enter the shared name manually or find 
a shared printer by clicking the 
Browse button.
NOTE: If you cannot find your machine in network, please turn 
off the firewall and click 
Update.
For Windows operating system, click 
Start → Control Panel 
and start windows firewall, and set this option unactivated. For 
other operating system, refer to its on-line guide.
6After the installation is finished, a window asking you to 
print a test page appears. If you choose to print a test 
page, select the checkbox and click 
Next.
Otherwise, just click 
Next and skip to step 8.
7If the test page prints out correctly, click Yes.
If not, click 
No to reprint it.
8Click Finish.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing Printer Software in Windows
8
NOTE: After setup is complete, if your printer driver doesn’t 
work properly, reinstall the printer driver. See Reinstalling 
Printer Software on page 10.
Custom Installation
You can choose individual components to install and set a 
specific IP address.
1Make sure that the printer is connected to your network 
and powered on. For details about connecting to the 
network, see the supplied printer’s User’s Guide.
2Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation 
window appears.
If the installation window does not appear, click 
Start and 
then 
Run. Type X:\Setup.exe, replacing “X” with the 
letter which represents your drive and click 
OK.
If you use Windows Vista, click 
Start → All programs → 
Accessories → Run, and type X:\Setup.exe.
If the 
AutoPlay window appears in Windows Vista, click 
Run Setup.exe in Install or run program field, and 
click 
Continue in the User Account Control window.
3Click Install Software. 
4Select Custom installation. Click Next.
5The list of printers available on the network appears. 
Select the printer you want to install from the list and then 
click 
Next. 
• If you do not see your printer on the list, click Update to 
refresh the list, or select 
Add TCP/IP Port to add your 
printer to the network. To add the printer to the network, 
enter the port name and the IP address for the printer.
To verify your printer’s IP address or the MAC address, print 
a Network Configuration page.
• To find a shared network printer (UNC Path), select 
Shared 
Printer [UNC]
 and enter the shared name manually or find 
a shared printer by clicking the 
Browse button.
NOTE: If you cannot find your machine in network, please turn 
off the firewall and click 
Update.
For Windows operating system, click 
Start → Control Panel 
and start windows firewall, and set this option unactivated. For 
other operating system, refer to its on-line guide.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing Printer Software in Windows
9
TIP: If you want to set a specific IP address on a specific 
network printer, click the 
Set IP Address button. The Set IP 
Address window appears. Do as follows:
a. Select a printer to be set with a specific IP address from the 
list.
b. Configure an IP address, subnet mask, and gateway for the 
printer manually and click
 Configure to set the specific IP 
address for the network printer.
c. Click Next.
6Select the components to be installed and click Next.
7You can also change the printer name, set the printer to be 
shared on the network, set the printer as the default printer, 
and change the port name of each printer. Click 
Next.
To install this software on a server, select the Setting up 
this printer on a server
 checkbox.
8After the installation is finished, a window asking you to 
print a test page appears. If you choose to print a test 
page, select the checkbox and click 
Next.
Otherwise, just click 
Next and skip to step 10.
9If the test page prints out correctly, click Yes.
If not, click 
No to reprint it.
10Click Finish.
NOTE: After setup is complete, if your printer driver doesn’t 
work properly, reinstall the printer driver. See Reinstalling 
Printer Software on page 10.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing Printer Software in Windows
10
Reinstalling Printer Software
You can reinstall the software if installation fails.
1Start Windows.
2From the Start menu select Programs or All Programs 
→ your printer driver name → Maintenance.
3Select Repair and click Next.
4The list of printers available on the network appears. 
Select the printer you want to install from the list and then 
click 
Next. 
• If you do not see your printer on the list, click 
Update to 
refresh the list, or select 
Add TCP/IP Port to add your 
printer to the network. To add the printer to the 
network, enter the port name and the IP address for the 
printer.
• To find a shared network printer (UNC Path), select 
Shared Printer [UNC] and enter the shared name 
manually or find a shared printer by clicking the 
Browse 
button.
You will see a component list so that you can reinstall any 
item individually.
NOTE: If your printer is not already connected to the 
computer, the following window will appear.
• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click 
Next, and No on the following screen. Then the installation 
will start and a test page will not be printed at the end of the 
installation.
• The reinstallation window that appears in this User’s 
Guide may differ depending on the printer and 
interface in use.
5Select the components you want to reinstall and click 
Next.
If you installed the printer software for local printing 
and 
you select your printer driver name, the window 
asking you to print a test page appears. Do as follows:
a. To print a test page, select the check box and click 
Next.
b. If the test page prints out correctly, click Yes.
If it doesn’t, click 
No to reprint it.
6When the reinstallation is done, click Finish.
Removing Printer Software
1Start Windows.
2From the Start menu select Programs or All Programs 
→ your printer driver name → Maintenance.
3Select Remove and click Next.
You will see a component list so that you can remove any 
item individually.
4Select the components you want to remove and then click 
Next.
5When your computer asks you to confirm your selection, 
click 
Yes.
The selected driver and all of its components are removed 
from your computer.
6After the software is removed, click Finish.
Downloaded From ManualsPrinter.com Manuals