Xerox Phaser 3250D User Manual

							
Using Your Printer in Linux
29
Using the MFP Configurator
MFP Configurator is a tool primarily intended for configuring Printer.
After installing the MFP Driver,  the MFP Configurator icon will 
automatically be created on your desktop.
Opening the MFP Configurator
1Double-click  MFP Configurator  on the desktop.
You can also click the Startup Menu icon and select  Xerox MFP 
and then  MFP Configurator .
2Press each button on the Modules pane to switch to the 
corresponding configuration window.
You can use the onscreen help by clicking  Help.
3After changing the configurations, click  Exit to close the MFP 
Configurator. 
Printers Configuration button
Ports Configuration button
Printers Configuration
Printers configuration has the two tabs: Printers and Classes. 
Printers Tab
You can see the current system’s prin ter configuration by clicking on the 
printer icon button on the left side  of the MFP Configurator window.
You can use the following printer control buttons:
• Refresh : renews the available printers list.
• Add Printer : allows you to add a new printer.
• Remove Printer : removes the selected printer.
• Set as Default : sets the current printer as a default printer.
• Stop /Start : stops/starts the printer.
• Te s t : allows you to print a test page to check if the machine is 
working properly.
• Properties : allows you to view and change the printer properties. 
For details, see page 30.
Shows all of the 
installed printer.
Switches to Printer 
configuration.
Shows the status, 
model name and URI of 
your printer.
Downloaded From ManualsPrinter.com Manuals 
						

							
Using Your Printer in Linux
30
Classes Tab
The Classes tab shows a list of available printer classes.
•Refresh  : Renews the classes list.
• Add Class... :  Allows you to add a new printer class.
• Remove Class :  Removes the selected printer class.
Ports Configuration
In this window, you can view the list  of available ports, check the status 
of each port and release a port that is stalled in busy state when its owner 
is terminated for any reason.
• Refresh  : Renews the available ports list.
• Release port :  Releases the selected port.
Shows the status of the 
class and the number of 
printers in the class.
Shows all of the 
printer classes.
Switches to 
ports 
configuration.
Shows the port type, 
device connected to the 
port and status
Shows all of the 
available ports.
Configuring Printer Properties
Using the properties window provided by  the Printers configuration, you 
can change the various properties for your machine as a printer.
1Open the MFP Configurator.
If necessary, switch to Printers configuration.
2Select your machine on the available printers list and click 
Properties .
3The Printer Properties window opens.
The following five tabs display at the top of the window:
•  General : allows you to change the printer name, location and 
description. The name entered in this tab displays on the 
printer list in Printers configuration.
•  Connection : allows you to view or select another port. If you 
change the printer port from USB to parallel or vice versa 
while in use, you must re-configure the printer port in this tab.
•  Driver : allows you to view or select another printer driver. By 
clicking  Options , you can set the default device options.
•  Jobs : shows the list of print jobs. Click  Cancel job to cancel 
the selected job and select the  Show completed jobs check 
box to see previous jobs on the job list.
•  Classes : shows the class that your printer is in. Click  Add to 
Class  to add your printer to a specific class or click  Remove 
from Class  to remove the printer from the selected class.
4Click OK to apply the changes and close the Printer Properties 
Window.
Downloaded From ManualsPrinter.com Manuals 
						

							
Using Your Printer in Linux
31
Printing a Document
Printing from Applications
There are a lot of Linux applications that you are allowed to print from 
using Common UNIX Printing System (CUPS). You can print on your 
machine from any such application.
1From the application you are using, select  Print from the  File 
menu.
2Select  Print directly using  lpr.
3In the Xerox LPR window, select the model name of your 
machine from the Printer list and click  Properties.
4Change the printer and print job properties.
The following four tabs display at the top of the window.
•  General  - allows you to change the paper size, the paper 
type, and the orientation of the documents, enables the 
duplex feature, adds start and  end banners, and changes the 
number of pages per sheet.
•  Te x t  - allows you to specify the page margins and set the text 
options, such as spacing or columns.
Click.
•  Graphics  - allows you to set image options that are used 
when printing images/files, such as color options, image size, 
or image position.
•  Device : allows you to set the prin t resolution, paper source, 
and destination.
5Click  Apply  to apply the changes and close the Properties 
window. 
6Click  OK in the Xerox LPR window to start printing.
7The Printing window appears, allowing you to monitor the status 
of your print job.
To abort the current job, click  Cancel.
Printing Files
You can print many different types of  files on the Xerox machine device 
using the standard CUPS way - directly  from the command line interface. 
The CUPS lpr utility allows you do that. But the drivers package replaces 
the standard lpr tool by a much more user-friendly Xerox LPR program.
To print any document file:
1Ty p e  lpr   from the Linux shell command line and 
press  Enter. The Xerox LPR window appears.
When you type only  lpr and press  Enter, the Select file(s) to 
print window appears first. Just se lect any files you want to print 
and click  Open. 
2In the Xerox LPR window, select your printer from the list, and 
change the printer and print job properties.
For details about the properties window, see page 31.
3Click OK to start printing.
Downloaded From ManualsPrinter.com Manuals 
						

							
Using Your Printer with a Macintosh
32
9Using Your Printer with a 
Macintosh
Your machine supports Macintosh systems with a built-in USB 
interface or a 10/100 Base-TX net work interface card. When you 
print a file from a Macintosh computer, you can use the PostScript 
driver by installing the PPD file.
NOTE: Some printers do not support a network interface. Make 
sure that your printer supports a network interface by referring to 
Printer Specifications in your Printer User Guide.
This chapter includes:
• Installing Software
• Setting Up the Printer
•Printing
Installing Software
The PostScript driver CD -ROM that came with your machine provides 
you with the PPD file to use the PS driver, Apple LaserWriter driver, for 
printing on a Macintosh computer.
Printer driver
Installing the printer driver
1Connect your machine to the co mputer using the USB cable or 
the Ethernet cable. 
2Turn on your computer and the machine.
3Insert the PostScript driver  CD-ROM which came with your 
machine into the CD-ROM drive.
4Double-click the  P3250 on your Macintosh desktop. 
5Double-click the  MAC_Installer folder.
6Double-click the  MAC_Printer folder.
7Double-click the  Xerox Phaser 3250D  or Xerox Phaser 
3250DN  icon.
8Click Continue .
9Click Install .
10After the installation is finished, click  Quit.
Uninstalling the printer driver
1Insert the CD-ROM which came with your printer into the CD-
ROM drive.
2Double-click  CD-ROM icon  that appears on your Macintosh 
desktop.
3Double-click the  P3250 on your Macintosh desktop. 
4Double-click the  MAC_Installer folder.
5Double-click the  MAC_Printer folder.
6Double-click the  Xerox Phaser 3250D  or Xerox Phaser 
3250DN  icon.
7Select Uninstall  and then click  Uninstall.
8Click Continue .
9When the uninstallation is done, click  Quit.
Setting Up the Printer 
Set up for your printer will be different depending on which cable you use 
to connect the printer to your co mputer—the network cable or the USB 
cable.
For a Network-connected
NOTE: Some printers do not support a network interface. Before 
connecting your printer, make sure that your printer supports a 
network interface by referring to Printer Specifications in your 
Printer User Guide.
Mac OS 10.3 or higher (Xerox Phaser 3250D)
1Follow the instructions on “Installing Software” on page 32 to 
install the PPD file on your computer.
2Open the  Applications  folder → Utilities , and Print Setup 
Utility .
• For MAC OS 10.5, open  System Preferences from the 
Applications  folder, and click  Printer & Fax.
3Click Add on the  Printer List .
• For MAC OS 10.5, press the “ +” icon then a display window 
will pop up. 
4For MAC OS 10.3, select the  IP Printing tab. 
• For MAC OS 10.4, click  IP Printer.
• For MAC OS 10.5, click  IP.
5Select Socket/HP Jet Direct in Printer Type.
WHEN PRINTING A DOCUM ENT CONTAINING MANY 
PAGES, PRINTING PERFORMANCE MAY BE ENHANCED 
BY CHOOSING SOCKET FO R PRINTER TYPE OPTION. 
Downloaded From ManualsPrinter.com Manuals 
						

							
Using Your Printer with a Macintosh
33
6Enter the printer’s IP address in the Printer Address field.
7Enter the queue name in the  Queue Name field. If you cannot 
determine the queue name for your printer server, try using the 
default queue first.
8For MAC OS 10.3, if Auto Select  does not work properly, select 
Xerox  in Printer Model  and your printer name  in Model 
Name . 
• For MAC OS 10.4, if Auto Select does not work properly,  select  Xerox in Print Using  and your printer name  in 
Model . 
• For MAC OS 10.5, if Auto Select does not work properly,  select  Select a driver to use...  and your printer name  in 
Print Using . 
Your machine appears on the Printer List and is set as the 
default printer.
9Click  Add.
Mac OS 10.3 or higher (Xerox Phaser 3250DN)
1Follow the instructions on “Installing Software” on page 32 to 
install the PPD file on your computer.
2Open the  Applications  folder → Utilities , and Print Setup 
Utility .
• For MAC OS 10.5, open  System Preferences from the 
Applications  folder, and click  Printer & Fax.
3Click Add on the  Printer List .
• For MAC OS 10.5, press the “ +” icon then a display window 
will pop up. 
4For MAC OS 10.3, select the  Rendezvous tab. 
• For MAC OS 10.4, click  Default Browser and find the 
Bonjour .
• For MAC OS 10.5, click  Default and find the  Bonjour.
The name of your machine appears on the list. Select 
XRX000xxxxxxxxx  from the printer box, where the  xxxxxxxxx 
varies depending on your machine.
5For MAC OS 10.3, if Auto Select  does not work properly, select 
Xerox  in Printer Model  and your printer name  in Model 
Name . 
• For MAC OS 10.4, if Auto Select does not work properly,  select  Xerox in Print Using  and your printer name  in 
Model . 
• For MAC OS 10.5, if Auto Select does not work properly,  select  Select a driver to use...  and your printer name  in 
Print Using . 
Your machine appears on the Printer List and is set as the 
default printer.
6Click  Add.
For a USB-connected
Mac OS 10.3 or higher
1Follow the instructions on “Installing Software” on page 32 to 
install the PPD file on your computer.
2Open the  Applications  folder → Utilities , and Print Setup 
Utility .
• For MAC OS 10.5, open  System Preferences from the 
Applications  folder, and click  Printer & Fax.
3Click Add on the  Printer List .
• For MAC OS 10.5, press the “ +” icon then a display window 
will pop up. 
4For MAC OS 10.3, select the  USB tab. 
• For MAC OS 10.4, click  Default Browser and find the USB 
connection.
• For MAC OS 10.5, click  Default and find the USB connection.
5Select your printer name .
6For MAC OS 10.3, if Auto Select does not work properly, select 
Xerox in Printer Model  and your printer name  in Model 
Name . 
• For MAC OS 10.4, if Auto Select does not work properly,  select  Xerox in Print Using  and your printer name  in 
Model . 
• For MAC OS 10.5, if Auto Select does not work properly,  select  Select a driver to use...  and your printer name  in 
Print Using . 
Your machine appears on the Printer List and is set as the 
default printer.
7Click  Add.
Downloaded From ManualsPrinter.com Manuals 
						

							
34
Using Your Printer with a Macintosh
Printing 
NOTES: 
• The Macintosh printer’s properties window that appears in this 
User Guide may differ depending on the printer in use. However 
the composition of the printer properties window is similar.
•You can check your printer name in the supplied CD-ROM.
Printing a Document
When you print with a Macintosh, you need to check the printer software 
setting in each application  you use. Follow these steps to print from a 
Macintosh.
1Open a Macintosh application and select the file you want to 
print.
2Open the  File menu and click  Page Setup (Document Setup  
in some applications). 
3Choose your paper size, orientation, scaling, and other options 
and click  OK.
4Open the  File menu and click  Print.
5Choose the number of copies you want and indicate which 
pages you want to print. 
6Click  Print when you finish setting the options.
Make sure that your 
printer is selected.
▲ Mac OS 10.3
Changing Printer Settings
You can use advanced printing features when using your printer.
From your Macintosh application, select 
Print from the File menu. The 
printer name which appears in the printer properties window may differ 
depending on the printer in use. Except  for the name, the composition of 
the printer properties  window is similar.
NOTE: The setting options may differ depending on printers and 
Macintosh OS version.
Layout
The Layout tab provides options to  adjust how the document appears 
on the printed page. You can print multiple pages on one sheet of paper. 
Select 
Layout from the Presets drop-down list to access the following 
features.
•  Pages per Sheet : This feature determines how many pages 
printed on one page. For details, see Printing Multiple Pages 
on One Sheet of Paper on the next column.
•  Layout Direction : You can select the printing direction on a 
page as like the examples on UI.
▲ Mac OS 10.4
Downloaded From ManualsPrinter.com Manuals 
						

							
35
Using Your Printer with a Macintosh
Printer Features
This tab provides options for selecting the paper type and adjusting print 
quality. Select 
Printer Features from the Presets drop-down list to 
access the following features:
• Reverse Duplex Printing : Allows you to select general print 
order compare to duplex print order. 
• Fit to Page  (Phaser 3250DN only): This setting allows you to 
scale your print job to any se lected paper size regardless of 
the digital document size. This can be useful when you want 
to check fine details on a small document.
• Image Mode : Image Mode allows the user to enhance 
printouts. The available options are Normal and Text 
Enhance. 
• Paper Type : Set Paper Type  to correspond to the paper 
loaded in the tray from which you want to print. This will let 
you get the best quality printout.  If you load a different type of 
print material, select the corresponding paper type.
• Resolution : You can select the printing resolution. The 
higher the setting, the sharper the  clarity of printed characters 
and graphics. The higher setting also may increase the time it 
takes to print a document.
NOTE: For optimal performance and reliability consider using xerox 
paper.
▲ Mac OS 10.4
Printing Multiple Pages on One Sheet of 
Paper
You can print more than one page on a single sheet of paper. This 
feature provides a cost-effective way to print draft pages.
1From your Macintosh application, select  Print from the  File 
menu. 
2Select  Layout .
3Select the number of pages you  want to print on one sheet of 
paper on the  Pages per Sheet  drop-down list.
4Select the page order from the  Layout Direction option.
To print a border around each page on the sheet, select the 
option you want from the  Border drop-down list.
5Click Print, and the printer prints the selected number of pages 
on one side of each page.
▲ Mac OS 10.4
Downloaded From ManualsPrinter.com Manuals 
						

							
36
Using Your Printer with a Macintosh
Duplex Printing
You can print on both sides of the paper. Before printing in the duplex 
mode, decide on which edge you will be binding your finished document. 
The binding options are:
Long-edged binding: Which is the conventional layout used in book 
binding.
Short-edged binding: Which is the type often used with calendars. 
1From your Macintosh application, select  Print from the  File 
menu. 
2Select the  Layout. 
3Select a binding orientation from  Two-Sided option.
4Click Print and the printer prints on both sides of the paper. 
CAUTION: If you have selected duplex printing and then try to 
print multiple copies of a document, the printer may not print 
the document in the way you wa nt. In case of  Collated 
copy, if your document has od d pages, the last page of the 
first copy and the first page of  the next copy will be printed on 
the front and back of one sheet. In case of  Uncollated 
copy, the same page will be pr inted on the front and back of 
one sheet. Therefore, if you need multiple copies of a 
document and you want those copies on both sides of the 
paper, you must print them one at a time, as separate print 
jobs.
▲ Mac OS 10.4
Downloaded From ManualsPrinter.com Manuals 
						

							
37
Software section 
Index
A
advanced printing 19
B
booklet printing 20
D
document, printMacintosh 34
Windows 13
double-sided printing 21
E
Extras properties 17
F
favorites settings 18
G
Graphics properties 16
H
help 24
help, use 18
I
install printer driverMacintosh 32
Windows 4
installing
Linux software 27
L
Layout properties Windows 15
Linux driver, install 27
printer properties 30
printing 31
M
Macintoshdriverinstall 32
printing 34
setting up the printer 32
N
n-up printing
Macintosh 35
Windows 19
O
orientation, print 31Windows 15
overlay create 23
delete 23
print 23
P
Paper properties 15
paper size 15print 31
paper source 31 Windows 15
paper type print 31
paper type, set Macintosh 35
poster, print 20
PostScript driver installing 24
print document 13
fit to page 21
from Macintosh 34
from Windows 13
N-up
Macintosh 35
Windows 19
overlay 23
poster 22
PRN 14
scaling 21
watermark 22
print resolution 31
printer driver, install Linux 27
printer properties Linux 31
Macintosh 34
Windows 14, 24
printer resolution Windows 16
printer software installMacintosh 32
Windows 4
uninstall
Windows 10
printing
booklets 20
double-sided 21
from Linux 31R
resolutionprinting 31
S
setip softwareinstallWindows 11
setting
darkness 16
favorites 18
Downloaded From ManualsPrinter.com Manuals 
						

							
38
image mode 16
resolution
Windows 16
toner save 16
true-type option 16
software installMacintosh 32
Windows 4
reinstall
Windows 9
system requirements
Macintosh 32
uninstall
Windows 10
status monitor 26
T
toner save 16
toner save, set 16
U
uninstall, software
Windows 10
uninstalling driverLinux 28
W
watermark create 22
delete 22
edit 22
print 22
Downloaded From ManualsPrinter.com Manuals