Xerox Mobile Scanner User Guide
Here you can view all the pages of manual Xerox Mobile Scanner User Guide. The Xerox manuals for Scanner are available online for free. You can easily download all the documents as PDF.
Page 11
Xerox Mobile Scanner User’s Guide11 Product Safety Certification This product is certified by the following Agency using the Safety standards listed: Standard UL60950-1 (USA) CSA 22.2 No. 60950-1 (Canada) IEC 60950-1
Page 12
Xerox Mobile Scanner User’s Guide 12 Environmental Health and Safety Contacts Contact Information For more information on Environment, Health, and Safety in relation to this Xerox product and supplies, please contact the following customer help lines: USA & Canada:1-800-828-6571 Europe:+44 1707 353 434
Page 13
Xerox Mobile Scanner User’s Guide13 2Welcome This chapter includes: •What’s in the Box on page 14 •The Xerox Mobile Scanner on page 15 •Insert the Battery on page 17 •Connect the Scanner to Charge the Battery on page 18 •Register Your Scanner on page 20 Thank you for purchasing the Xerox Mobile Scanner. With this scanner you can scan directly to a memory card or USB flash drive without connecting the scanner to a computer.
Page 14
Xerox Mobile Scanner User’s Guide 14 What’s in the Box Before proceeding, check the contents of the box. If items are missing or damaged, contact the dealer where you purchased the scanner. Xerox Mobile Scanner Quick Install Guide Technical Support CardWindows™ Installation Disc Carrying bag USB Cable Cleaning swab Battery Calibration page Plug adapters Power SupplyEye-Fi™ Memory card
Page 15
Xerox Mobile Scanner User’s Guide15 The Xerox Mobile Scanner Paper feed slot—Insert an item fac e u p in the scanner, aligned to the arrow at the end of the paper feed slot. Control panel—Scanner controls. •Power button—Press, hold-down for 3 seconds, then release the power button to turn the scanner on or off. Note that the scanner will automatically power off after 2 minutes if not in use. •Function button—Tap this button to cycle through the scan functions. •Status LEDs—these lights indicate the...
Page 16
Xerox Mobile Scanner User’s Guide 16 •Battery LED—This light indicates the scanner’s power status. Please refer to Status LEDs on page 78 for more information. USB cable port—Connect the provided USB cable to charge the scanner. When connected to a computer, you can transfer images from the USB flash drive or memory card. USB flash drive port—Insert a USB flash drive into this port to scan directly to the flash drive. Memory card slot—Insert an SD memory card into this slot to scan directly to a...
Page 17
Xerox Mobile Scanner User’s Guide17 Insert the Battery The battery comes pre-installed in the scanner’s battery compartment. Open the battery compartment, on the underside of the scanner, and pull out the Mylar strip. Close the battery compartment and proceed with charging the scanner. If the battery is not pre-installed in your unit, or if you need to replace the battery for any reason, please follow these instructions for installing the battery. Warning: Only use the battery model provided with the...
Page 18
Xerox Mobile Scanner User’s Guide 18 Connect the Scanner to Charge the Battery Important • Allow the battery to charge for at least 8 hours before using the scanner the first time. Note that recharging the battery, after using the scanner, takes only 4 hours for a completely drained battery. • Note that you cannot scan and charge the battery at the same time. Make sure the scanner power is not on if you want to charge the scanner battery. Note: only use the power adapter provided with the scanner...
Page 19
Xerox Mobile Scanner User’s Guide19 2. Plug the flat end into the power supply base. 3. Plug the power supply into a wall outlet. Note: You can also charge the scanner battery when it is connected to a USB port in your computer.
Page 20
Xerox Mobile Scanner User’s Guide 20 Register Your Scanner Registering your scanner is important as it provides you with access to our free telephone support service. Registration also gives you free access to software updates for your scanner. You will need an active internet connection to register your scanner. If you do not have internet access, you can contact our Customer Service department to register the scanner. Please refer to the Technical Support Card, that your received with the scanner,...