Xerox Mobile Scanner User Guide

Xerox Mobile Scanner
User’s Guide31
Scan and Transfer Images 
Wirelessly with Eye-Fi
This chapter includes:
•Install the Eye-Fi Center Application on page 32
•Log In and Activate the Eye-Fi Card on page 35
•The Eye-Fi Card Settings on page 39
•Scan and Send Files to a Computer on page 45
•Scan and Send Files to aniOS Mobile Device (iPad, iPod, and iPhone) on page 49
•Scan and Send Files to an Android Mobile Device on page 63
•PDF File Transfer using Evernote on page 70
•Access and Delete Images from the...

Xerox Mobile Scanner
User’s Guide 32
Install the Eye-Fi Center Application
Before you begin installing the software, make sure you have an active Internet connection. The Eye-Fi software will 
look for updated software during installation and you will be prompted to install any available updates.
You can use either a standard memory card reader or install the software with the Eye-Fi card in the scanner, 
connected and powered on.
Note: Do not delete any files or folders that are already on the Eye-Fi...

Xerox Mobile Scanner
User’s Guide33 7.Windows—double-click on Setup to launch the Eye-Fi installer. 
Mac—double-click on Eye-Fi and then double-click on Eye-Fi Installer to launch the Eye-Fi installer.
If there is an active Internet connection to your computer, the Eye-Fi installer will automatically check to see if 
there is a newer version of the software. If a newer version is found it will be downloaded to your computer and 
then the installer will launch when the download is complete.
8. Follow the...

Xerox Mobile Scanner
User’s Guide 34•Windows users—at the end of the installation the Eye-Fi Helper Firewall Tuning utility will open. Read the 
instructions on screen and follow the steps to configure Windows Firewall to allow access for the Eye-Fi 
Helper.
9. The Eye-Fi Center automatically opens when you click on Close or Finish at the end of the installation.
If the application does not open automatically, launch the application from the programs list for your computer.  

Xerox Mobile Scanner
User’s Guide35
Log In and Activate the Eye-Fi Card
Make sure the Eye-Fi card is in a memory card reader or in the scanner with the power on before you continue.
When the Eye-Fi Center opens the first time after installation, a login window is displayed. If you already have an 
Eye-Fi account please login now. Your new Eye-Fi card will be activated to your existing account. If this is your first 
time using Eye-Fi, you need to create an account. A valid Email address is required for...

Xerox Mobile Scanner
User’s Guide 36 4. At the Choose where to send photos & videos dialogue, select the options you want and then click on 
Continue. 
My computer—images are transferred to your computer when you are within range of your configured 
wireless network. This is the default option and the rest of the instructions in this section proceed from this 
option being selected. 
However, if you do not have a wireless network, or you do not want to add a wireless network to Eye-Fi card, 
select the...

Xerox Mobile Scanner
User’s Guide37 6. At the Send photos to an online sharing site dialogue, leave the Select later option selected then click on 
Continue. You can configure file sharing later.
7. Click on Close Window on the final Eye-Fi card activation dialogue. 
If you want to see a test scan using the Eye-Fi card, you need to disconnect the scanner from the computer 
and then power cycle the scanner before you do a sample scan and transfer.
8. If you created an account, an email is sent to you....

Xerox Mobile Scanner
User’s Guide 38 Alternate activation option
1. At the Choose where to send photos & videos dialogue, select My mobile device (iOS/Android) as the 
destination, and then click on Close Window.
2. Select your mobile device type at the Choose your mobile device dialogue and then click on Close Window.
3. Click Continue on each successive dialogue that displays on-screen, and then click on Close Window on the 
final screen. 
The instructions in these dialogues describe the process for...

Xerox Mobile Scanner
User’s Guide39
The Eye-Fi Card Settings
This section describes configuring the Eye-Fi card settings for scanning and wireless transfer of images. For any 
options not described here-in, clicking on the help button in the Eye-Fi center window will open the online help site 
for the Eye-Fi Center application.
Many of the options discussed in this section will have already been configured based on your selections while 
registering and activating the card. The purpose of this section is...

Xerox Mobile Scanner
User’s Guide 40
Adding or Removing Private Wireless Networks
Note: you will need to have the Eye-Fi Card connected to the computer to configure the network options for the 
card. You can either insert the card into the scanner, connect it the computer and turn on the power, or you can use 
a standard SDHC memory card reader.
1. Open the Eye-Fi Center software and log in.
2. Click on the gear icon next to the Eye-Fi card to open the settings window.
Use the Private Networks tab to add...