Xerox Documate 5445 User Guide

Installation Xerox® DocuMate® 5445 / 5460
User Guide13
4. On the Main menu, select Install software.
5. Make sure the boxes for Scanner Driver and Visioneer OneTouch are selected, as well as any 
other applications you want to install.
Note: The software provided with your scanner may differ slightly from the list shown in the 
window.
6. Click Install now. 

Xerox® DocuMate® 5445 / 5460 Installation
14User Guide
Installing the Scanner Driver
The scanner driver installation will start first.
1. The Welcome screen for the scanner driver Setup Wizard opens. Click Next.
Note: there may be an option in the installation window to remove any current scanning 
profiles. You will see this prompt if you already have a previous version of the scanner driver 
installed. Select the option in the installation window only if you want the existing profiles 
removed.
2. On...

Installation Xerox® DocuMate® 5445 / 5460
User Guide15
4.Stop when you see the “Complete the installation by connecting your hardware” window. Do 
not click OK yet. Leave the window open and proceed to the next section.
Note: If you do not see this on-screen diagram for connecting the scanner, stop and follow the 
instructions below.
Connect the USB Cable and Turn on the Power
1. Remove any tape from the USB cable.
2. Plug the USB cable into the USB port on the scanner then into a USB port on the...

Xerox® DocuMate® 5445 / 5460 Installation
16User Guide
3. Turn on the scanner power.
The status light comes on and flashes indicating that the scanner is receiving power.
Your computer recognizes that a scanner has been plugged into the USB port and 
automatically loads the appropriate software to run the scanner. 
4. When you’re certain that the software has completely loaded, return to the “Complete the 
installation by connecting your hardware” window. 
5. Click OK to complete the installation process. 

Installation Xerox® DocuMate® 5445 / 5460
User Guide17
6. Click Close on the Installation Complete window to close and exit the driver installer. 
User Utility Installation
The User Utility installation will automatically start after you close the TWAIN installation. The 
User Utility is a software diagnostic and maintenance software that you can use for monitoring 
your scanner hardware.
1. On the Xerox User Utility License Agreement window, read the license agreement. If you 
accept the terms, select...

Xerox® DocuMate® 5445 / 5460 Installation
18User Guide
Installing the ISIS Driver
1. You will first be prompted to select a language for the ISIS driver. The language selection on 
this screen only applies to the ISIS scanning interface.
Select the language you want to use then click on Next.
2. Click on Next in the ISIS Installation Welcome window.
3. Click on Install to begin the ISIS driver installation.
4. Click on Finish to close the ISIS installation complete window.
Installing Visioneer OneTouch...

Installation Xerox® DocuMate® 5445 / 5460
User Guide19
Installing Additional Applications
Your scanner includes free, additional applications as described in the table below.
1. Return to the disc’s Main menu and click Install software.
2. Select the additional applications you want to install, then click Install now. 
3. Follow the instructions on the screen to install each of the additional applications.
SoftwareAbout the Software
Nuance PaperPort
®PaperPort is a document management software...

Xerox® DocuMate® 5445 / 5460 Installation
20User Guide
View the User Guides
1. Return to the disc’s Main menu and click on View user guides.
2. Click on View scanner documentation to access the scanner user guide and scanning guides 
for OneTouch and TWAIN.
–Scanner user guide—Instructions for scanner setup, installation, operation, 
maintenance, safety, and warranty
–OneTouch scanning guide—Instructions for configuring and scanning using OneTouch
–TWAIN scanning guide—Instructions for accessing and...

Installation Xerox® DocuMate® 5445 / 5460
User Guide21
Register Your Scanner
Registering your scanner is important as it provides you with access to our free telephone support 
service. Registration also gives you free access to software updates for your scanner. 
You will need an active network connection to register your scanner. If you do not have network 
access you can contact our customer service department to register the scanner. Please refer to 
the Technical Support Card, that you received with...

Xerox® DocuMate® 5445 / 5460 Installation
22User Guide