Home > Whirlpool > Dishwasher > Whirlpool Wp 88 Installation And Maintenance Instructions

Whirlpool Wp 88 Installation And Maintenance Instructions

Add to Favourites
    Download as PDF

    View the Whirlpool Wp 88 Installation And Maintenance Instructions for free. All the Whirlpool manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 Whirlpool is a registered trademark of Whirlpool USA5019 396 01167 1 GBWP 88 Before using the dishwasher, read the installation and maintenance instructions carefully! 1) Programme data obtained in conformity with European standard EN 50242. The data may vary, for example, according to different loads, extra functions, sensor settings (only with sensor programmes), water supply temperatures, water hardness and power supply voltage. 2) Programme for energy data label in conformity with EN 50242. -...
    Page 2 2 2. QUICK REFERENCE GUIDE Detailed instructions are given in the following pages, see also chapter “5. What to do if...” 1. Switch on the applianceOpen the dishwasher door. Press the ON button. 2. Select a programmePress the button or to bring up the desired programme on the display. Select options, if available. 3. Select the type of detergentThe detergent selection procedure varies depending on the dishwasher model. Chapter “1. Overview ” provides instructions for selecting detergent type. 4....
    Page 3 3 3. HOW TO USE THE APPLIANCE PROGRAMME SELECTION Press the button or to bring up the desired programme on the display. The appliance must be switched on. If required, select options (if supplied). The corresponding indicator lamp switches on. Appropriate programmes and relative available options are detailed in table 1.1 on page 1. Programme times stated in the table were obtained under normal conditions and may vary depending on conditions. Differences of up to 20 minutes are possible with...
    Page 4 4 3. HOW TO USE THE APPLIANCE c. How to adjust the rinse aid dosage regulator The rinse aid dosage can be adjusted to the detergent used. The lower the setting, the less rinse aid is dispensed (factory setting: position 4). Press the button 2 to open the cover. Using a coin or similar object, turn the arrow to the desired setting. After adjusting the rinse aid setting, shut the cover again. If there are streaks: reduce the dosage by turning the dial to a lower setting (1-3). If crockery is not...
    Start reading Whirlpool Wp 88 Installation And Maintenance Instructions

    Related Manuals for Whirlpool Wp 88 Installation And Maintenance Instructions

    All Whirlpool manuals