Home > Whirlpool > Fridge freezer > Whirlpool ARC 903 AP Manual

Whirlpool ARC 903 AP Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Whirlpool ARC 903 AP Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 415 Whirlpool manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							25
    CHANGING THE REVERSIBLE DOOR
    This refrigerator has been built with the door hinges on the 
    right. If you wish to change the opening direction, follow the 
    instructions below:
    1.
    Remove the screws (6) which fix the worktop to 
    disassembly the worktop
    2.
    Remove the two screws (1) that hold the upper hinge (5) 
    (right side) to the frame. Take away the upper hinge (5).
    3.
    Lift the door and place it on a padded surface to prevent 
    scratching it.
    4.
    Remove the two screws (8) that hold the lower hinge (2) 
    and Make sure to
    Remove the lower hinge (2).
    5.
    Remove the left front leg (4) and transfer it to the right side.
    6.
    Before placing this lower hinge (2), remove the bolt-pin (9) 
    and reverse the direction of the lower hinge (2). Then install 
    the lower hinge (2) onto the left side of the lower frame with 
    two screws (8).
    7.
    Insert the bolt-pin (9) to the lower hinge (2).
    8.
    Set the door to its place making sure the door seat at the 
    lower hinge (2)
    9.
    While holding the door in the closed position secure the 
    upper hinge (5) in the top frame of left side with two screws 
    ( 1 ) .  P l e a s e  r e m e m b e r  t h a t  d o  not tighten the two screws (1) 
    until the top of the door is levelled with the counter top.
    10.
    Install the worktop onto the top of the cabinet with screws 
    (6)
    Figura 1 
    Represents position of components prior to door reversal.
    Figura 2 
    Represents position of components after door reversal.
    Figura 1
    Figura 2
    60202010GB.fm  Page 25  Wednesday, May 16, 2007  10:44 AM
     
    						
    							26
    ELECTRICAL CONNECTION
    1) For Great Britain only
    Warning - this appliance must be earthed
    Fuse replacement
    If the mains lead of this appliance is fitted with a BS 1363A 13amp 
    fused plug, to change a fuse in this type of plug use an A.S.T.A. 
    approved fuse to BS 1362 type and proceed as follows:
    1.
    Remove the fuse cover (A
    ) and fuse (B
    ).
    2.
    Fit replacement 13A fuse into fuse cover.
    3.
    Refit both into plug.
    Important:
    The fuse cover must be refitted when changing a fuse and if the fuse 
    cover is lost the plug must not be used until a correct replacement is 
    fitted.
    Correct replacement are identified by the colour insert or the colour 
    embossed in words on the base of the plug.
    Replacement fuse covers are available from your local electrical 
    store.
    2) For the Republic of Ireland only
    The information given in respect of Great Britain will frequently 
    apply, but a third type of plug and socket is also used, the 2-pin, side 
    earth type.
    3) Socket outlet / plug (valid for both countries)
    If the fitted plug is not suitable for your socket outlet, please contact 
    Whirlpool Service for further instruction. Please do not attempt to 
    change plug yourself. This procedure needs to be carried out by a 
    qualified Whirlpool technician in compliance with the manufactures 
    instructions and current standard safety regulations.
    60202010GB.fm  Page 26  Wednesday, May 16, 2007  10:44 AM
     
    						
    All Whirlpool manuals Comments (0)

    Related Manuals for Whirlpool ARC 903 AP Manual