Westinghouse Television UW40T User Manual

							WALL MOUNT OPTION
56
English
WALL MOUNT OPTION
These 266 x 275 mm mounting holes allow the unit to be mounted on a wall. Please 
take out four M6 bolts from accessory packing. Use the four M6 bolts and four M6 x 
10 screws to wall mount the LED TV.
WALL MOUNT INSTALLATION REMINDERS
• Remove the LED TV base first bef ore mounting the unit on a wall. 
• It is the users responsibility to us e a UL listed wall mount unit rated to 
support the weight of this LED TV.
• Please consult qualified contra ctors for wall mount installation.
CAUTION :
The incomplete or improper mounting of this unit to a wall may cause it to fall down 
resulting to property damage and/or potentially serious injury. 
						

							TROUBLESHOOTING
57
English
TROUBLESHOOTING
ProblemCorrective Action
No power
• Make sure the power indicator is illuminated 
red.
• Make sure the power cord is securely 
connected to the AC-in jack and is plugged 
into a functional AC outlet. You may want to 
plug in another electrical device to the power 
outlet to verify that it is supplying the proper 
voltage.
Power is suddenly 
turned off.Make sure the sleep timer is turned off.
Remote control 
does not work.
• Press only one button at a time.
• Make sure the batteries are properly inserted.
• The batteries may already be drained out. 
Replace batteries with new ones.
Remote control 
code cannot be 
detected by a 
universal remote.• Purchase a separate learning remote control.
• Go to www.wde.com for a list of remote 
codes.
No picture
• Make sure the video input cable is properly 
connected to the correct terminal, and that the 
correct input mode is enabled. To illustrate, 
when a VGA cable is connected to display a 
computer screen, the PC input mode must be 
enabled.
• Verify that the antenna is properly connected 
and that the preferred channel is enabled in 
the channel list. Press and select 
Channels/Channel List.
• Adjust the display settings. 
						

							TROUBLESHOOTING
58
English
No picture or the No
Signal message 
appears when a 
VGA cable is 
connected.
• Make sure the VGA cable is properly 
connected to the LED TV’s VGA port.
• Decrease the video resolution setting on the 
computer and try again.
• Adjust the display settings.
Picture is cut off or 
appear in a sidebar 
screen.
Press  to adjust the Aspect ratio.
Poor image quality 
in TV mode (cutoff 
picture, snowy 
images).
• Check your antenna connection. If necessary, 
rotate the antenna and wait up to ten seconds 
for a signal.
• Reduce signal splitters and excessively long 
cables.
• Replace poor antenna cables and/or 
connectors to improve signal quality.
•Press  to adjust the Aspect ratio.
• Adjust the Noise Reduction setting in Picture 
menu.
• In HDMI mode, make sure the external device 
is compatible with the LED TV.
Wrong, abnormal or 
missing colors
• If any colors (red, green or blue) are missing, 
check the video cable to make sure it is 
securely connected. Loose or broken pins in 
the cable connector could cause an improper 
connection.
• Adjust the Hue, Saturation and Color 
Temperature settings in Picture menu. 
• Connect the TV to another computer and 
check if the problem is with the computer 
screen.
ProblemCorrective Action 
						

							TROUBLESHOOTING
59
English
No sound
• Make sure the audio input cable is properly 
connected to the correct terminal, and that the 
correct input mode is enabled.
• The volume may be muted, press or Vol+ key 
to turn on the volume.
• Adjust the Bass, Treble, and Balance settings 
in Audio menu.
• If you are using the TV speakers, make sure 
the TV Speakers option is set to On in Audio 
menu.
• If you are using an external audio device, 
press and select Audio to make sure the TV 
Speakers option is set to Off in Audio menu.
NOTES:
If the problem condition persists even after performing the 
recommended corrective actions, contact us by:
• Logging on to www.wde.com
• Contacting the Westinghouse Customer Service at (800) 701-0680 
or e-mail us at [email protected]
ProblemCorrective Action 
						

							SPECIFICATIONS
60
English
SPECIFICATIONS
ItemSpecification
Model Name UW40TC1W
Panel Active Area 
(Diagonal, mm)
885.6 (H) x 498.15 (V)
Resolution 1920 (H) x 1080 (V)
Contrast Ratio 
(min) 2500:1
Response Time 
(min) 6 ms (g-g)
Aspect Ratio 1.77 (16:9)
Display color 1.07 Billion
Audio/Video 
Input/Output 
Terminals •HDMI x2
• AV with R/L Audio x1
• VGA with 3.5 mm mini jack x1
• SPDIF Out x1
• USB for service x1
• Tuner x1
• R/L Audio Line Out X1
Speaker Out 10W (2 channels)
AV Timing 480i/p, 720p, 1080i/p
PC Timing 640 x 480 @ 60Hz/75Hz,
800 x 600 @ 60Hz/75Hz,
1024 x 768 @ 60Hz/75Hz,
1280 x 1024 @ 60Hz,
1920 x 1080 @ 60Hz
Power Consumption 
(Watts) ≤
 90W (@ 19V DC)
Power Consumption 
(Standby, Watts) 
						

							SPECIFICATIONS
61
English
Physical 
Specifications
Dimensions 
(WxHxD)
With stand: 
937.83 x 622.16 x 200.89 mm
36.9 x 24.5 x 7.9 inch
Without stand: 
937.83 x 572.38 x 68.23 mm
36.9 x 22.5 x 2.7 inch
Weight (Net)12.7 kg (28 lb)
Weight (Gross)16 kg (35.27 lb)
NOTES:
• These product specifications are subject to change without user 
notification.
• Do not set your computer graphics card to exceed the unit’s refresh 
rates; doing so may cause damage to the LED TV.
ItemSpecification