Westinghouse Television UW40T User Manual
Have a look at the manual Westinghouse Television UW40T User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 23 Westinghouse manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
LED TV BASE 16 English 11 IMPORTANT: Use one M6 x 10 screws to fix the stand base and LED TV on a wooden table. REMOVING THE LED TV BASE If you intend to repack the LED TV unit (for shipping or storage) or you want to change the installation to a wall mount option, you must first remove the LED TV base. 1 Turn off the LED TV and all connected devices. 2 Disconnect the power cord from the LED TV. 3 Disconnect all signal cables from the I/O port terminals. 4 Remove the M6 x 10 screw securing the base to the desk. 5 Lay the LED TV on a clear, flat, and stable surface. 6 Remove the screws securing the base to the LED TV. 7 Detach the base from LED TV. 8 Pack the screws you removed in step 5 together with the LED TV base for future reassembly.
ANTENNA CONNECTION 17 English ANTENNA CONNECTION OUTDOOR ANTENNA CONNECTION CABLE TV (CTV/DTV) CONNECTION The unit has a TV tuner (75 ohm coaxial cable connector) located on the rear I/O panel for easy cable hookup. When connecting the 75 ohm coaxial cable to the unit, screw the 75 ohm cable to the TV tuner. Some cable TV companies offer premium pay channels. Since the signals of these channels are scrambled, a cable TV converter/descrambler is usually provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3 or 4. Typically one of these channels is used. If a channel is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below. NOTE: The F-type connector should be finger-tightened only. When connecting the RF cable to the LED TV, do not tighten F-type connector with any tool. If tools are used, it may cause damage to the LED TV (e.g. breaking of internal circuit). Cable TV lead in VHF, UHF or VHF/UHF combination antenna 75 ohm coaxial cable (round) 300 ohm twin-lead (flat)300-75 ohm ADAPTER (Not supplied) Separate VHF/UHF Antenna VHF Antenna UHF Antenna 300 ohm twin-lead 300 ohm twin-lead 75 ohm coaxial cable COMBINER (Not supplied)Home Antenna terminal (75 ohm)RF IN IN OUT
EXTERNAL DEVICE CONNECTIONS 18 English • A position on the RF switch (not supplied) – You can view all unscrambled channels by using the TVs channel keys. • B position on the RF switch (not supplied) – You can view the scrambled channels via the converter/descrambler by using the converters channel keys. EXTERNAL DEVICE CONNECTIONS You can enjoy picture and sound by connecting various audio-video devices to the terminals located on the rear and side I/O panels of the LED TV. • TV cable input – You can use a commercially available audio/video cable. • Component (YPbPr) input – Picture can be displayed only when a 480i, 480P, 720P, 1080i, or 1080P signal is received. • HDMI input – Picture can be displayed only when a 480i, 480P, 720P, 1080i, or 1080P signal is received. When you connect to the HDMI terminal with a DVI-HDMI conversion cable, there is a possibility that the picture may not display correctly. • Audio output – You can output audio signals from the LED TV set through the analog audio out and SPDIF terminals. IMPORTANT: • Turn off the LED TV first before connecting an external device to prevent any possible damage or physical injury. • For more information about external device connections, see the operation manual of the external device you wish to connect to the LED TV. • Make sure that the correct cables are connected to each terminal. Improper cable connections may cause damage to the LED TV. RF switch (not supplied) Cable TV line A B IN OUT Tw o - s e t signal splitter (Not supplied) Cable TV converter/descrambler (Not supplied)
EXTERNAL DEVICE CONNECTIONS 19 English The following diagram shows the external device connections. HDMI1 USB HDMI2 SPDIF TUNERVGA AUDIO IN DC IN VIDEO RL OUTRL IN Antenna cable / Cable TV line Antenna / Cable systemPC AUDIO OUTAUDIO OUT 3.5 mm stereo mini jack cable RGB cable Audio cableSPDIF cable HDMI-HDMI cable DVI-HDMI cable DVD player with an HDMI terminal AC to DC adapter Power outlet Home video game system Camcorder VCR DVD playerDigital TV tuner Composite AV cable DVD player with a DVI terminal Audio amplifierAudio amplifier
POWER CONNECTION 20 English POWER CONNECTION CONNECTING AC POWER Connect the power cord of the AC adapter to the LED TV then to a proper AC outlet. INITIAL SETUP Press on the control panel or on the remote control to turn on the LED TV. Select the desired language and select Ye s to use the SetupWizard. The SetupWizard will guide you on how to set up the LED TV’s operational settings. IMPORTANT:The LED TV is designed to be powered via an AC adapter. Use ONLY the AC adapter included in the package. Turn off all connected devices before plugging the AC adapter into the power outlet. FavoriteMTSZZ ZC.C. A B
POWER CONNECTION 21 English WESTINGHOUSE HDTV SETUP Select Language Use the up and down arrows on your HDTV control panel or remote control to select the language to be used for menus and messages. Press Enter to continue. Time Zone Use the up and down arrows on your HDTV control panel or remote control to select your local time zone. Press Enter to continue. Press Go Back to return to the previous screen. Power On Mode Use the up and down arrows on your HDTV control panel or remote control to select the power on mode. Press Enter to continue. Press Go Back to return to the previous screen. Let’s Get Connected Select “Click here to scan channels from the Antenna or coaxial cable input.” and press enter on your remote control to start scanning channels. Press Enter to continue. Press Go Back to return to the previous screen.
POWER CONNECTION 22 English Select Channel Scan Type Use the up and down arrows on your HDTV control panel or remote control to select the channel scan type. Press Enter to continue. Press Go Back to return to the previous screen. Channel Scan in progress The channel scan may take a while to complete. When the scan is complete, you will be able to watch your local TV programming.
POWER CONNECTION 23 English WESTINGHOUSE HDTV SETUP - THROUGH CABLE/ SATELLITE BOX Select Language Use the up and down arrows on your HDTV control panel or remote control to select the language to be used for menus and messages. Press Enter to continue. Time Zone Use the up and down arrows on your HDTV control panel or remote control to select your local time zone. Press Enter to continue. Press Go Back to return to the previous screen. Power On Mode Use the up and down arrows on your HDTV control panel or remote control to select the power on mode. Press Enter to continue. Press Go Back to return to the previous screen.
POWER CONNECTION 24 English Channel Scan - Cable/Satellite Box Select “Click here to connect a Cable Box or Satellite Box.” and press enter on your remote control to start scanning channels. Press Enter to continue. Press Go Back to return to the previous screen. Cable/Satellite Box Input Use the up and down arrows on your HDTV control panel or remote control to select the input connected to the set top box. Press Enter to continue. Press Go Back to return to the previous screen. RF Warning Select “Proceed” and then press Enter to continue. Press Go Back to return to the previous screen.
POWER CONNECTION 25 English WESTINGHOUSE HDTV SETUP - NOT THROUGH CABLE/ SATELLITE BOX Select Language Use the up and down arrows on your HDTV control panel or remote control to select the language to be used for menus and messages. Press Enter to continue. Time Zone Use the up and down arrows on your HDTV control panel or remote control to select your local time zone. Press Enter to continue. Press Go Back to return to the previous screen. Power On Mode Use the up and down arrows on your HDTV control panel or remote control to select the power on mode. Press Enter to continue. Press Go Back to return to the previous screen.