Westinghouse Television UW40T User Manual

							IMPORTANT INFORMATION
6
English
Circuit Overload
Do not overload wall outlets, extension cords, or power strips. This can result in a fire 
or electronic shock.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or 
pinched by items placed upon or against them. Periodically inspect the cords for 
damage. Install the LED TV near a wall socket outlet where the power cord can be 
readily accessed.
Ventilation
The slots and openings on the cabinet are provided for necessary ventilation. To 
ensure reliable operation of the LED TV and to protect it from overheating, these 
slots and openings must never be blocked or covered.
Never cover the slots and openings with a cloth or other materials.
Do not block the openings by placing the LED TV on a bed, sofa, 
rug or other similar surface.
Do not place the LED TV in a built-in installation such as a 
bookcase or a rack unless proper ventilation is provided or the 
manufacturer’s instructions have been adhered to. 
						

							IMPORTANT INFORMATION
7
English
WARNINGS AND PRECAUTIONS
• Do not orient the LED TV towards direct sunlight to reduce glare.
• If the LED TV will not be used for a long period of time, unplug the unit and 
remove the batteries from the remote control.
• Avoid touching the display screen by hand or any object.
• Never remove the rear cover. The LED TV interior contains high-voltage 
parts. You may be seriously injured if you touch them.
• Always handle the LED TV with caution when moving it.
• Do not install the LED TV in airtight compartments, or in areas where it can 
be exposed to water or high temperature.
• Ensure that the area around the LED TV is clean and free of moisture.
• Do not place anything on the LED TV that can hinder heat dissipation.
• Do not place naked flame sources, such as lighted candles, on or near the 
LED TV.
• Do not place anything on the LED TV that can cause liquid to splash on it 
(e.g. flower vase).
• Do not place heavy objects on the LED TV, audio/video cables, or power 
cord.
• If the LED TV emits smoke, abnormal noise, or a strange odor, immediately 
turn it off and contact the Westinghouse Service Center by:
– Logging on to www.wde.com.
– Contacting the Westinghouse Customer Service at (800) 701-0680.
– E-mailing us at [email protected]. 
						

							IMPORTANT INFORMATION
8
English
ANTENNA INSTALLATION SAFETY
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the LED TV, be sure the 
antenna or cable system is grounded to prevent voltage surges and built-up static 
charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides 
information on proper grounding of the mast and supporting structure, grounding of 
the lead-in wire to an antenna discharge unit, connection to grounding electrodes, 
and requirements for the grounding electrode.
Lightning
Power lines
For added protection for the LED TV during a lightning storm, or 
when it is left unattended and unused for long periods of time, 
unplug it from the wall outlet and disconnect the antenna or cable 
system. DO NOT disconnect the antenna or the power cord during 
a heavy storm—lightning may strike while you are holding the 
cable cord, causing serious injury. Turn off the LED TV and wait for 
the weather to improve.
An outside antenna system should not be located in the vicinity of 
overhead power lines or other electric light or power circuits, or 
where it can fall into such power lines or circuits. When installing an 
outside antenna system, extreme care should be taken to keep 
from touching such power lines or circuits as contact with them 
might be fatal.
Antenna Grounding According to the National 
Electrical Code, ANSI/NFPA 70
Antenna lead in wire
Antenna discharge unit 
(NEC Section 810-20)
Grounding Conductors 
(NEC Section 810-21)
Grounding clamps
Power service grounding 
electrode system 
(NEC Art 250 part H) Grounding clamps
Electric service 
equipment
NEC: National Electrical Code
ZZZ 
						

							IMPORTANT INFORMATION
9
English
CLEANING THE LED TV
To clean the screen:
1Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other 
particles.
2If it is still not clean, apply a small amount of non-ammonia, non-alcohol 
based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1Wipe the case with a soft, dry cloth.
2If it is still not clean, apply a small amount of non-ammonia, non-alcohol 
based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then 
wipe the surface.
Dolby-Digital Notice
Manufactured under license from Dolby Laboratories. Dolby and the double-D 
symbol are registered trademarks of Dolby Laboratories.
• Make sure the LED TV is turned off and the power cord is 
disconnected from the power outlet.
• Never spray or pour any liquid directly onto the screen or the 
case. 
						

							PACKAGE CONTENTS
10
English
PACKAGE CONTENTS
40” LED TV UnitRemote Control (with 2x AAA batteries)
LED TV BaseCD-ROM (User’s manual)
Power CordWarranty Card
AC AdapterScrews for Base
Favorite MTSZ
Z
ZC.C.
TV
Video1
HDMI1
YPbPr1
PC
Video2
HDMI2
YPbPr2 ENT
DA
B
C
Vol Input
Ch
Enter
RMT-11
M6 x 10 *4 pcs 
						

							CONTROL PANEL
11
English
CONTROL PANEL
ItemDescription
1. MENUDisplays the LED TV setup screen.
2. Volume +/-• Adjusts the volume during playback.
• Selects an item on a menu screen.
3. Channel /• Switches the channel during TV viewing.
• Selects an item on a menu screen.
4. INPUT• Selects the video input source.
• Executes a command on a menu screen.
5. PowerToggles the power on and off.
23145 
						

							TERMINALS
12
English
TERMINALS
ItemFunction
1. DC inConnects the AC to DC adapter from this outlet to 
a power source.
2. Audio inConnects to the audio out port of a computer.
3. VGAConnects to a computer or other device with a 
VGA output using a 15-pin VGA cable.
4. Composite AV inputConnect to an external AV device such as a VCR, 
DVD player, set-top box, or game system.
5. TV tunerConnects the LED TV to an antenna or cable 
service.
6. Audio outConnect to an analog audio output device.
7. HDMI 1/2Connects to an external AV device such as a 
VCR, DVD player, set-top box, or game system.
8. USB Service portFor service only.
9. SPDIF audio outConnects to an external digital audio receiver.
HDMI1 USB HDMI2 SPDIF
TUNERVGA AUDIO
IN DC IN
VIDEO
RL
OUTRL
IN
9 8 7
1
2
3
5
4
6 
						

							REMOTE CONTROL
13
English
REMOTE CONTROL
ItemDescription
1. Mute  Mutes the sound. Press again to toggle 
the sound back on.
2. Power Toggles the TV power on or off.
3. Backlight Adjusts the LED screen backlight.
4. MTSToggles the Multichannel Television 
Sound options.
5. CCToggles the closed caption display on or 
off.
6. Sleep zZzSets the sleep timer for the LED TV to 
turn off automatically.
7. Channel keysUse to key in the channel number.
8. Favorite Switches to the favorite channels (for 
details on how to save a new favorite 
channel, see 
page 28).
9. Enter ENTExecutes a channel entry.
10. Menu Accesses the LED TV setup menus.
11 .  R e t u r n  Switches to the last selected channel.
12. Arrow keysNavigate through the on-screen menus.
13. Enter Executes a command.
14. G
Displays the Electronic Program Guide 
(EPG). It contains the program 
information for the channel you’re 
watching.
15. Info Displays the input source or channel 
information as well as the system time.
16. InputSelects the video input source.
17. Vol +/-Ajusts the system volume.
18. Ch  / Switches to other TV channels.
19. Aspect ratio Selects the video display format.
20. YPbPr1Selects VGA-Component as the input 
source.
21. TVSelects TV or HDTV as the input 
source.
22. HDMI1Selects HDMI1 as the input source.
23. Video1Selects the Composite AV device as the 
input source.
24. YPbPr2Not supported.
25. PCSelects VGA as the input source.
26. HDMI2Selects HDMI2 as the input source
27. Video2Not supported.
FavoriteMTSZZ
ZC.C.
TV Video1 HDMI1 YPbPr1
PC Video2 HDMI2 YPbPr2ENTDA
B
C
VolInput
Ch Enter
RMT-11
1
7
10
14
173
52
4
6
20
2221
23
24
2625
27 9
19 13
16 8
11
12
15
18 
						

							REMOTE CONTROL OPERATION
14
English
REMOTE CONTROL OPERATION
INSTALLING THE REMOTE CONTROL BATTERIES
1Remove the battery cover.
2Insert the batteries. Make sure the (+) and (–) marks on the batteries match 
those inside the compartment.
3Re-attach the battery cover.
REMOTE CONTROL TRANSMISSION RANGE
Transmission range depends upon the reception angle. The range of coverage is 20° 
horizontal/vertical at a distance of 10 feet from the LED TV.
CAUTIONS:
• Only use AAA batteries.
• Do not mix new and old batteries. This may result in cracking or leakage, 
which may pose a fire risk or lead to personal injury.
• Insert batteries according to the (+) and (-) markings. Inserting the 
batteries incorrectly may result in cracking or leakage, which may pose a 
risk of fire or lead to physical injury.
• Dispose of used batteries in accordance with local laws and regulations.
• Keep batteries away from children and pets.
• When the remote control will not to be used for an extended period, 
remove the batteries.
FavoriteMTSZZ
ZC.C.
A
B 
						

							LED TV BASE
15
English
LED TV BASE
INSTALLING THE LED TV BASE
1Open the LED TV carton box.
2Remove the LED TV base.
3 Remove the plastic bag.
4 Remove the two top carton stabilizers from the LED TV.
5 Remove the protective plastic covering the LED TV.
6 Grasp the two sides of  the LED TV and then pull it  out of the carton box.
7 Remove the two bottom carton stabilizers from the LED TV.
8 Lay the LED TV on a clear, flat, and stable surface.
9 Align the base to the bottom side of LED  TV and use four M6 x 10 screws to 
secure it.
10 Carefully orient the LED TV in an upright position.
CAUTION:
The LED TV unit may be too heavy for one person to lift. If this is the case, 
make sure to ask for assistance in handling the LED TV to prevent 
physical injury and/or damage to the unit.