Vodavi Starplus 96ex Hybrid Key Telephone System Installation Manual

The duration of a Trunk to Trunk DISA call can be 
set by the system administrator, 
The APL card is required to provide the DISA fea- 
ture. 
A. 
B. 
C. Programmable Access 
A 3-digit security code can be assigned in the 
system database to restrict unwanted use of 
the DISA circuits. Each DISA line can be pro- 
grammed independently for 24 hour DISA use 
or night DISA use only. 
CO Line Group Access 
Incoming DISA callers may access all line 
groups such as m or WATS lines or other 
outgoing services...

STARPLus@ 96EX 
Key Telephone System 
In addition to the station programmable option a 
system programmable option will enable of disable 
a warning tone when the station marked as an 
executive is cut into the conversation. This is useful 
for UCD agent supervisor or training personnel who 
require a service observing option. 
NOTE: A decrease in volume may occur on the CO 
line after the barge-in occurs. 
CAUTION: USE OF THIS FEATURE WHEN THE EX- 
ECUTIVE OVERRIDE WARNING TONE IS DIS- 
ABLED h4AY BE...

200.62 GROUP CALL PICK-UP 
Stations can be placed in one or more of four pick-up 
groups. Stations within a group can pick up tone 
ringing intercom calls, recalling outside line ringing, 
or transferred outside line calls for another station in 
?hat group. 
200.63 HEADSET COMPATiBiLlTY 
?he Starplus electronic key telephones are designed 
to allow the connection of an indushy standard, 
electret mic compatible, modular headset. The user 
connects the modular headset to the handset jack 
on the...

0 Handsfree (H)(upper position). The station 
user, upon hearing a tone burst and voice an- 
nouncement over the speaker, can reply 
handsfree. (Not available on Basic Electronic 
!+ Telephone) 
e 
Tone Ringing (T)(center position). A standard 
tone ring notifies the party of an incoming inter- 
com call. The called party answers by lifting 
the handset or moving the switch to the hands- 
free (H) position or pressing the ON/OFF but- 
ton. 
e 
Privacy (P)(lower position). The station user 
receives a...

200.76 LOOP BUT-TON CO LINE ACCESS 
A station not having a direct appearance for a CO 
line will receive incoming CO calls and transferred 
CO calls under the loop button. Only one call at a 
time can be connected to a keyset on the loop button. 
If more than one loop button is on a key set, the loop 
buttons may be conferenced together. If all pro- 
grammed Loop buttons on a keyset are busy or have 
a CO call on hold, the party attempting to transfer a 
CO line to that station will receive busy tone and...

F. Night Ringing Assignments 
Each CO line may be individually programmed 
for Night ringing to other stations, to Hunt 
groups, UCD groups, Voice Mail groups, or 
off-net via speed dial. When the system is 
placed into night mode, manually or automat- 
ically, ringing will follow the night ringing assign- 
ments for each CO line. 
G. External Night Ringing 
The system can be programmed so that CO 
lines marked for UNA will activate Loud Bell 
Control contact #I connected to an external 
ringing device...

200.91 PAUSE TIMER 200.95 POOL Bull-ON OPERATION 
When dialing a speed number, a timed pause be- 
tween digit sending can be placed in the number. 
The length of this pause can be programmed in the 
system database. 
200.92 PBX DIALING CODES 
The System will allow five one or two-digit access 
codes to be entered into memory. When one of 
these codes is dialed, this signals the KSU that toll 
restriction is to be applied at the next dialed digits 
after the code. If one of these codes is not dialed,...

200.99 PULSE-TO-TONE SWITCHOVER 
When commanded, the system will change the sig- 
naling on an outside line from dial pulse to DTMF 
(tone), allowing the use of common carriers behind 
a dial pulse outside fine. This can be done manually 
when diaiing, or can be stored within a speed dial 
number. 
200.100 RANGE PROGRAMMING 
The Stat-plus 96EX allows for range programming 
when programming Co lines and Stations. Range 
programming allows you to program all parameters 
alike for the entire range or you...

on a per station basis and ail six are available for day 
and night assignment. Station Class of Sewice 
works in conjunction with CO line Class of Sewice 
:o provide the most flexible means for offering cus- 
:om toll restriction. As a part of the Dialing privilege 
assignment through Class of Service the system 
Jff ers two programmable Allow and Deny tables for 
additional customization of a toll restriction plan for 
a particular customer. 
ZOO.1 08 STATION SPEED DIAL 
Zach station user can program...

in queue, the “XX CALLS IN QUEUE” display 
will be seen at all UCD members of that group. 
NOTE: If a UCD mefnbef is taken auf of fhe gfoup 
(ie. DND, Call Forward, Unavaikble etc.) they will not 
feceive ca//s in queue infofrnation. 
2. Any station not assigned in a UCD group can 
view the number of calls in queue for any given 
UCD Group. To view the number of calls in 
queue the station user dial’s the Calls In Queue 
code (or presses a programmed FLEX button 
with this code) then enters the UCD group...