Vizio Television E320-B2 Specifications

							5
35
Blocking and Unblocking Content by Rating
A channel may sometimes broadcast programs that are meant 
for children, and at other times broadcast programs that are 
meant for mature audiences. You may not want to block the 
channel completely using a channel lock, but you may wish to 
block certain programs from being viewed.
When this is the case, you can use the TV’s Rating Block feature 
to block content based on its rating.
For a list of content ratings and their definitions, visit  
www.tvguidelines.org.
To block or unblock content by its rating:
1 .  From the PARENTAL CONTROLS menu, highlight the content 
type you want to adjust and press OK:  
 
USA TV - USA television program broadcasts.  
 
USA  MOVIE - USA movie broadcasts.  
 
CAN-ENGLISH - Canadian English television program 
broadcasts.  
 
CAN-FRENCH - Canadian French television program 
broadcasts.
2 .  For each rating type you want to block or unblock, use the 
Up/Down and Left/Right Arrow buttons on the remote to 
highlight the rating type and press OK. 
3 .  When the rating type is blocked, the Lock  icon appears 
locked. Content with this rating and all higher ratings 
cannot be viewed.
4 .  When the rating type is unblocked, the Lock  icon appears 
unlocked. Content with this rating and all lower ratings can 
be viewed.  
 
If you want to block all unrated content, highlight Block 
Unrated Shows and use the Arrow buttons on the remote to 
select  On.
5 .  When you are finished adjusting the rating level blocks, press 
the  EXIT button on the remote. Changing the Parental Control Passcode
If you use the parental controls, you should change the passcode 
to prevent children from accessing inappropriate material.
To change the parental control passcode:
1 . 
From the PARENTAL CONTROLS menu, highlight Change PIN  
and press OK. The  CHANGE PIN menu is displayed.
2 .  In the New PIN field, use the Number Pad on the remote to 
enter your new 4-digit parental control passcode.
3 .  In the Confirm PIN field, use the Number Pad on the remote 
to re-enter your new 4-digit parental control passcode.
4 .  Write down your new parental control passcode and save it 
in a secure location.
5 .  Press the EXIT button on the remote.
Resetting the Content Locks
To reset the content locks to the factory-default settings:
1 .  From the PARENTAL CONTROLS menu, highlight RESET LOCKS  
and press OK. The TV displays, “Are you sure you want to 
RESET ALL LOCKS SETTINGS to the factory defaults?”
2 .  Highlight  Ye s and press OK.  
						

							5
36
Changing the On-Screen Menu Language
Your TV can display the on-screen menu in different languages.
To change the on-screen menu language:
1 . Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight System and 
press  OK. The  SYSTEM menu is 
displayed.
3 .  Use the Arrow buttons on the 
remote to highlight Menu 
Language and press OK. T h e  
MENU LANGUAGE menu is 
displayed.
4 .  Highlight your preferred 
language (English,  Français, o r  
Español) and press OK. 
5 .  Press the EXIT button on the 
remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
MENU LANGUAGE
English
Français Español
Setting the  Time Zone
To ensure the correct time is displayed when you press the GUIDE 
button, set the TV’s time zone:
1 .  Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight System and 
press  OK. The  SYSTEM menu is 
displayed.
3 .  Use the Arrow buttons on the 
remote to highlight Time and 
Local Settings and press OK. 
The  TIME & LOCAL SETTINGS  
menu is displayed.
4 .  Highlight  Time Zone and press 
OK. The TIME ZONE menu is 
displayed.
5 .  Highlight your time zone and 
press  OK.
6 .  Highlight  Daylight Saving and 
press  OK. The  DAYLIGHT SAVING  
menu is displayed. Choose On  
if your locale observes daylight 
savings time, or Off  if it does 
not.
7 .  Press the EXIT button on the remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
TIME ZONE
Alaska
Hawaii Pacific
Mountain CentralEastern
Atlantic
Newfoundland IndianaArizona  
						

							5
37
Adjusting the CEC Settings
The CEC function on your TV enables you to control 
HDMI-connected devices with the included remote without any 
additional programming.  
Not all HDMI devices support CEC. See your device’s 
user manual for details.
To enable, disable, or adjust CEC settings:
1 . Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight System  
and press OK. The  SYSTEM menu is displayed.
3 .  Use the Arrow buttons on the remote to highlight CEC  and 
press  OK. The CEC menu is displayed.
4 .  Use the Arrow and OK buttons to adjust each setting:
• CEC Function - To use CEC, you must select On.
•  System Audio Control - When system audio control is on, 
you can control your device’s audio using the TV’s remote 
control.
•  Device Discovery - Use this function to determine if your 
device is connected and supports CEC.
5 .  Press the EXIT button on the remote. Turning the Power Indicator On or Off
The Power Indicator on the front of your TV normally does not 
glow when the TV is on. You can change this setting if you prefer 
the light to be on.
To turn the Power Indicator Light on or off:
1 . 
Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight System  
and press OK. The  SYSTEM menu is displayed.
3 .  Highlight  Power Indicator and press OK.
4 .  Use the Up/Down Arrow buttons to select On or Off , then 
press  OK.  
						

							5
38
USING THE RESET & ADMIN MENU
You can use the TV’s Reset & Admin menu to:• Reset the TV settings
•  Restore the TV to its factory 
default settings
•  Start the Store Demo
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
RESET & ADMIN
Reset TV  Settings
Reset TV to Factory Defaults
Store Demo
Resetting the TV Settings
To reset the TV’s picture and audio settings:
1 .  Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight System  
and press OK. The  SYSTEM menu is displayed.
3 .  Highlight  Reset & Admin and press OK. The  RESET & ADMIN 
menu is displayed.
4 .  Highlight  Reset TV  Settings and press OK. The TV  displays, 
“Select Reset to restore video and audio settings to the 
factory defaults.”
5 .  Highlight  Reset and press OK.
6 .  Press the EXIT button on the remote.
Resetting the TV settings will reset Audio and Video 
settings only.  
						

							5
39
Restoring the TV to Factory Default Settings
All of the on-screen menu settings can be reset to the factory 
defaults. 
If you restore the TV to the factory default settings, all 
changes you have made to the settings will be lost!
To restore the TV to its factory default settings:
1 . Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight System  
and press OK. The  SYSTEM menu is displayed.
3 .  Highlight  Reset & Admin and press OK. The  RESET & ADMIN 
menu is displayed.
4 .  Highlight  Reset TV to Factory Defaults and press OK. 
5 .  Enter your parental control passcode. If you have not yet set 
up a parental passcode, enter the default, 0000.  
 
The TV displays, “Select Reset to restore all TV settings to 
factory defaults.”.
6 .  Highlight  Reset and press OK. 
7 .  Wait for the TV to turn off. The TV will turn back on shortly 
afterward and the Setup App will begin. 
USING THE GUIDED SETUP MENU
Using  Guided Setup
The TV’s Setup App can be used to easily set up the TV tuner.
To use guided setup:
1 .  Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Highlight  Guided Setup and 
press  OK. The  GUIDED SETUP  
menu is displayed.
3 .  Highlight the guided setup you 
want to use and press OK:
• Tuner Setup - Set up the TV 
tuner.
4 .  Follow the on-screen 
instructions. When finished, 
press the EXIT button on the 
remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
GUIDED SETUP
Tuner Setup  
						

							5
40
USING THE  INFO WINDOW
The Info Window can be displayed by pressing the GUIDE button 
on the remote:
• Press the GUIDE button one time to display channel, 
input, and display information.
•  Press the GUIDE button two times to display the program 
title, program rating, audio information, and the start and 
end times of the program.
DIGITAL EPISODE GUIDE WINDOW
Oliver’s Holiday Surprise 
1080p   6:15pm
11:00AM - 12:00PMTV-PG (V)Dolby Digital Stereo
Oliver wakes up one morning only to discover that his pals are missing. In this hour-
long holiday special, Oliver goes on a journey in search of his pals. Who knows what 
he’ll encounter on the way?
Program Description
Program Title
28-1
KCET-HD
Normal
Channel/Input Information  
						

							6
41
Using the USB Media Player
USING THE USB MEDIA PLAYER
The USB Media Player allows you to connect a USB thumb drive to 
your TV and view photos. 
Connecting a USB Thumb Drive to the TV
1 . Turn the TV off. Connect your USB thumb drive to the USB port 
on the back of the TV.
2 .  Press the Power/Standby button on the remote or touch the 
Power  control on the side of the TV to turn it on.
Playing USB Media
To play USB media, you must first save your images onto a USB 
thumb drive. 
Remember:
• The USB thumb drive must be formatted as FAT32.
•  Files on the USB thumb drive must end in a supported file 
extension (.jpg). 
To play your USB media:
1 .  Connect your USB thumb drive to the USB port on the side of 
the TV.
2 .  Press the V  button.
3 .  Highlight your USB device in the list and press OK.
4 .  Highlight the type of media you wish to display: Photo.   
Press  OK.
5 .  Use the Arrow buttons to highlight the file you want to 
display. Press OK. The file plays. 
You can display your photos in fullscreen. Select the 
photo, press OK, then highlight Fullscreen and press 
OK.
USB PORT
Do not remove the USB thumb drive while the TV is on. 
Doing so may damage the drive.  
						

							6
42
Start Slideshow
Name A-Z
Thumbnails 
Settings
View:Sort:
Photo
VIZIO_2GB\Photo
oot
File Name: D 1920x1080
Resolution: 1920x1080
Size:            1607270KB
USB1:
A.jpgroot
B.jpgC.jpg
D.jpg E.jpg
F.jpg
G.jpg H.jpg
I.jpg
Page 1 of 1
VIZI O
Folder Contents
This area displays the 
contents of the currently 
selected folder. You can 
browse between files using 
the Arrow and OK buttons 
on the remote.
Current Folder
 
Displays the folder path.
Page Information
If your USB thumb drive has more 
files than can be displayed on a 
single screen, the page information 
is displayed here.
Back Button
 
Highlight and press OK to return to left column.
Connected 
Sources  
Displays 
connected 
USB  devices. To 
change source, 
highlight it and 
press  OK.
Current Folder Back Button 
 
Highlight this button 
and press OK if you 
would like to return to 
the previous screen.
Sort by Name or Date
View Thumbnails  or 
Folders
Adjust Slideshow 
Settings Start Fullscreen 
Slideshow Photo Infomation
Displays name, 
resolution, and file 
size for currently 
selected photo.
PHOTO VIEWER  
						

							ATroubleshooting & Technical Support
DO YOU HAVE QUESTIONS?
LET US HELP!
YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT
Phone:
E mail:
We b :(877) 878-4946 (TOLL-FREE)
techsupport@
VIZIO.com
www.VIZIO.com/support
Hours of operation:  
M onday - Friday: 5 AM TO 8 PM (PST)
S aturday - Sunday: 7 AM TO 4 PM (PST)
The VIZIO support team is highly trained 
 
and is based in the United States. 
We can help with:
•  New Product Setup
•  Connecting Your  Devices
•  Technical Problems
•  And More
We speak English • Se habla Español • Nous parlons Français
43  
						

							A
44
The TV displays “No Signal.”• Press the INPUT button on the remote control to select a 
different input source.
•  If you are using cable TV, satellite, or antenna 
connected directly to the TV, scan for channels. See 
Scanning for Channels on page 27.  
There is no power. • Ensure the TV is plugged into a working electrical outlet.
•  Ensure the power cable is securely attached to the TV.
•  Press the Power/Standby button on the remote or on 
the side of the TV to turn the TV on.  
The power is on, but there is no image on the screen. • Ensure all cables are securely attached to the TV.
•  Ensure all devices are connected correctly. Devices 
differ; see your device’s user manual for details.
•  Adjust Brightness, Contrast, or Backlight. See 
Adjusting 
the Picture Settings
 on page 20.
•  Press the INPUT button on the remote to select a 
different input source.   There is no sound.
• Press  Volume Up on the remote control.
•  Press the MUTE button on the remote to ensure mute is 
off.
•  Check the audio settings. See 
Adjusting the Audio 
Settings
 on page 24. Ensure the speakers are set to 
On.
•  Ensure no headphones are connected to the TV.
•  Check the audio connections of external devices 
(Blu-ray player, game console, cable/satellite box) that 
are connected to the TV.
•  If you are using an antenna, the signal strength of the 
channel may be low. Ensure your antenna is connected 
securely to the TV and move the antenna around the 
room or close to a window for the best signal.
The colors on the TV don’t look right. • Adjust the Color and Tint settings in the Picture menu. 
See 
Adjusting the Picture Settings on page 20.
•  Check all cables to ensure they are securely attached.  
The buttons on the remote aren’t working. • Ensure you are only pressing one button at a time.
•  Point the remote directly at the TV when pressing a 
button.
•  Replace the remote batteries with new ones. See 
Replacing the Batteries on page 10.