Vizio Television E320-B2 Specifications

							5
25
Resetting the Audio Settings
To reset the audio settings to the factory default settings:
1 . Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight Audio and 
press  OK. The  AUDIO menu is displayed.
3 .  Use the Arrow buttons to highlight Reset Audio Mode and 
press  OK. The TV displays, “Select Reset to restore factory 
default audio settings.”
4 .  Highlight  Reset and press OK.
5 .  Press the EXIT button on the remote.ACTIVATING THE  SLEEP TIMER
When activated, the TV’s sleep timer will turn the TV off after a set 
period of time.
To use the sleep timer:
1 . Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight Timers and 
press  OK. The TIMERS menu is 
displayed.
3 .  Use the Arrow buttons on the 
remote to highlight Sleep Timer.
4 .  Use the Left/Right Arrow   
buttons on the remote to 
highlight the period of time 
after which you want the TV to 
go to sleep: 30, 60, 90, 120, or 
180 minutes. If you don’t want 
the sleep timer to activate, 
change the setting to Off .
5 .  When you have finished setting 
the sleep timer, press the EXIT  
button on the remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
TIMERS
Sleep Timer                                    Off
Auto Power Off                 10 minutes  
						

							5
26
Setting the Auto Power Off Feature
To help save energy, your TV is set by default to turn off after 10 
minutes if no signal is being displayed on the screen. This feature 
can be deactivated.
To set the Auto Power Off feature:
1 . From the  TIMER menu, use the Up/Down Arrow buttons on 
the remote to highlight Auto Power Off.
2 .  Use the Left/Right Arrow  buttons on the remote to change 
whether the TV will turn off.  If you don’t want the TV to turn off 
when there is no signal, change the setting to Off . Otherwise, 
select  10 minutes.
3 .  When you have finished setting the auto power off time, 
press the EXIT button on the remote.SETTING  UP THE TUNER
You can use the TV’s Tuner menu to:
• Select a Tuner Input
•  Perform an Auto Channel Scan
•  Perform a Partial Channel Scan
•  Manually Add Channels
•  Select channels to skip
•  Select Analog MTS modes
•  Select Digital Languages
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
TUNER
Tuner Mode                         Antenna
Auto Channel Scan
Partial Channel Search
Add Analog Channel
Skip Channel
Analog Audio                          Stereo
Digital Language                   English  
						

							5
27
Selecting a Tuner Input
Select the type of tuner input you will be using. You can select either 
Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
1 . From the  TUNER menu, highlight Tuner Mode and press OK. 
The  TUNER MODE menu displays.
2 .  Highlight  Antenna or Cable and press OK. Press EXIT.
Scanning for Channels
Before the TV can detect and display channels and their 
associated information, you must scan for channels. A channel 
scan may also be necessary when the TV has been moved to an 
area where different free-to-air broadcast television channels are 
available.
To perform an Auto Channel Scan:
1 .  From the  TUNER menu, highlight 
Auto Channel Scan, and press 
OK. The  CHANNEL SCAN begins.
2 .  Wait until the channel scan is 
100% complete. Highlight Done  
and press OK.
3 .  Press the EXIT button on the 
remote.
If the channel scan is cancelled,the 
channels that were already 
discovered are retained. A new 
channel scan will clear all channels.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
CHANNEL SCAN
Channel Scan
Digital Channels: 0
Analog Channels: 0
13% Complete Cancel
Cancel the channel scan.
Adding New Channels
Occasionally, you may need to add a new range of channels  or 
add a new analog channel. You can do this by using the Partial 
Channel Search and Add Analog Channel options.
To add a range of new channels:
1 .  From the  TUNER menu, highlight Partial Channel Search, 
and press OK. The  PARTIAL CHANNEL SEARCH menu is 
displayed.
2 .  Highlight  Scan Mode and select the type of channel you 
are adding: Analog,  Digital, or Analog/Digital.
3 .  Highlight  From Channel and enter the channel where 
you want to begin the scan. (Use the Left Arrow  button to 
backspace. Use the Number Pad on the remote to enter the 
channel.)
4 .  Highlight  To Channel and enter the channel where you want 
to end the scan. (Use the Left Arrow  button to backspace. 
Use the Number Pad on the remote to enter the channel.)
5 .  Highlight  Start and press OK. The partial channel search 
begins.
6 .  Wait until the partial channel search is 100% complete. 
Highlight  Done and press OK.
7 .  Press the EXIT button on the remote.  
						

							5
28
To add a single new analog channel:
1 . From the  TUNER menu, highlight 
Add Analog Channel  and 
press  OK. The  ADD ANALOG 
CHANNEL  menu is displayed.
2 .  Highlight  Enter Channel # and 
use the Number Pad on the 
remote to enter the number of 
the channel you are adding.
3 .  Highlight  Add Channel and 
press  OK. The TV scans for the 
channel.
4 .  When the TV is done scanning 
for the channel, press the EXIT  
button on the remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
ADD ANALOG CHANNEL
Enter Channel #
Add Channel
Skipping Channels
After a channel scan is completed, you may find that some 
channels are too weak to watch comfortably. There may also be 
some channels you do not want to view. You can remove these 
channels from the TV’s memory with the Skip Channel feature.
Channels that have been removed with the Skip 
Channel feature can still be viewed if the channel 
is entered using the Number Pad. If you wish to 
completely block a channel from being viewed, use 
the parental controls. See 
Locking and Unlocking 
Channels
 on page 34.
To remove a channel:
1 .  From the  TUNER menu, highlight 
Skip Channel, and press OK. 
The  SKIP CHANNEL menu is 
displayed.
2 .  For each channel you wish 
to remove, use the Up/Down 
Arrow buttons on the remote 
to highlight the channel and 
press  OK. A  
P appears to the 
right of each channel you 
select.
3 .  When you have selected all 
of the channels you wish to 
remove, press the EXIT button 
on the remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
SKIP CHANNEL
1Test 0
1Test 1
P
1-2Test 2P
2Test 3
2-2Test 4P
2-3Test 5  
						

							5
29
To use the Digital Language feature:
1 . From the  TUNER menu, highlight 
Digital Language and press 
OK. T h e  DIGITAL LANGUAGE  
menu is displayed.
2 .  Select your preferred language: 
English,  Español, or Français. 
Press  OK.
3 .  Press the EXIT button on the 
remote.  
Help
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
DIGITAL LANGUAGE
English
Français Español
Changing the  Audio Language
Some digital free-to-air, cable, and satellite channels broadcast 
programs in more than one language. The Analog Audio and 
Digital Language features allow you to listen to audio from 
Secondary Audio Programming (SAP). SAP allows you to listen to 
broadcasts in multiple languages. • Analog Audio works with analog channels.
•  Digital Language works with digital channels.
Not all programs are broadcast in multiple languages. 
The Analog Audio and Digital Language features 
only works when the program being viewed is being 
broadcast in the language you select.
To use the Analog Audio feature:
1 . From the  TUNER menu, highlight 
Analog Audio and press OK. 
The  ANALOG AUDIO  menu is 
displayed.
2 .  Select  Stereo,  SAP (secondary 
audio programming), or Mono. 
Press  OK.
3 .  Press the EXIT button on the 
remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
ANALOG AUDIO
StereoSAP
Mono  
						

							5
30
SETTING UP CLOSED CAPTIONING
Your TV can display closed captions for programs that include 
them. Closed captions display a transcription of a program’s 
dialogue.
The Closed Captioning menu only appears when the input is an 
antenna for Over-the-Air signals, cable TV directly from the wall 
(no cable box), or a device with a composite video connection.
To activate or deactivate closed 
captions:
1 . Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight Closed 
Captions and press OK. T h e  
CLOSED CAPTIONS menu is 
displayed.
3 .  Use the Arrow buttons on the 
remote to highlight the type 
of closed captions you wish to 
see:
• Analog Closed Captions for   
analog (NTSC) TV channels.
•  Digital Closed Captions for   
digital (ATSC) TV channels.
4 .  After highlighting the type of 
closed captions you wish to 
see, use the Left/Right Arrow  
buttons on the remote to select 
the caption channel you wish 
to display, then press EXIT.
If the program you are viewing is not being broadcast 
with closed captions, the TV will not display them.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
CLOSED CAPTIONS
Captions                                        Off
Analog Closed Captions           CC1
Digital Closed Captions             CS1
Digital Closed Captions Style
Changing the Appearance of Digital Closed Captions
Digital closed captions can be displayed according to your 
preference. See the diagram on the next page for an explanation 
of the parts of the closed caption area.
To change the appearance of digital closed captions:
1 .  From the CLOSED CAPTIONS 
menu, use the Arrow buttons 
to highlight Digital Closed 
Captions Style and press OK.
2 .  Use the Left/Right Arrow  
buttons on the remote to select 
Custom. The  DIGITAL CLOSED 
CAPTIONS STYLE menu appears 
as shown.
3 .  Use the Up/Down Arrow  
buttons on the remote to 
highlight the setting you wish 
to change, then use the Left/
Right Arrow buttons to change 
the setting:
•  Caption Style - Choose 
As Broadcast to keep 
default settings or Custom  
to manually change each 
setting.
•  Text Style  - Change the 
font used for the closed 
captioning text.
•  Text Size - Make the text larger or smaller.
•  Color - Change the color of the text.
•  Opacity - Change the transparency of the text.
•  Background Color - Change the color of the 
background directly behind the text.  
Help
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
DIGITAL CLOSED CAPTIONS STYLE
Caption Style Custom
Text Style As Broadcast
Text Size As Broadcast
Text Color As Broadcast
Text Opacity As Broadcast
Background Color As Broadcast
Background Opacity As Broadcast
Window Color As Broadcast
Window Opacity As Broadcast  
						

							5
31
• Background Opacity - Change the transparency of the 
background directly behind the text.
•  Window Color - Change the color of the closed 
captioning box.
•  Window Opacity - Change the opacity of the closed 
captioning box
4 .  When you are satisfied with the appearance of the closed   
captions, press the EXIT button on the remote.
In the example below, the closed caption text is green, the 
background is black, and the window is red.Typical choices include: • Transparent background, opaque window—The entire 
window remains filled with color, while the text appears in 
it. The area covered by the window stays the same until 
the signal from the TV or a device moves it out of the way 
of a changing picture.
•  Opaque background, transparent window—Only a strip 
of background appears behind the text. There is no 
window to block the picture.
Closed caption text sample Tex t
Window
Background (BG)
CLOSED CAPTIONS SCREEN LAYOUT   
						

							5
32
SETTING UP DEVICES
To make it easier to recognize the different devices attached to 
the inputs on your TV, you can rename the inputs. For example, if 
you have a DVD player connected to the Component input, you 
can rename that input to display “DVD Player”.
To change the name of an input:
1 . Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Up/Down  Arrow 
buttons on the remote to 
highlight  Devices and press 
OK. The  DEVICES menu is 
displayed.
3 .  Use the Up/Down  Arrow 
buttons on the remote to 
highlight the Input you wish to 
name and press OK. The  NAME 
INPUT menu is displayed.   4 . 
If you would like to use a preset 
input label, highlight Input 
Labels and press OK. Highlight 
the input label you want to use 
and press OK.  
 
If you would like to name 
the input yourself, highlight 
the field below Input Labels. 
Enter your custom label using 
the on-screen keyboard and 
highlight  OK and press OK. 
5 .  When you have finished 
naming your input, press the 
EXIT button on the remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
NAME INPUT
Input Labels HDMI-1
Blu-ray_
OK
Cancel
Select the input name from a list 
of common device names (Blu-ray, 
Cable Box, DVD, etc).
abcdefghi
jklmnopqr
stuvwxyz0
123456789
.@#.comSpace
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
DEVICES
HDMI-1 Blu-ray
HDMI-2
COMP  
						

							5
33
CHANGING THE TV  SETTINGS
Using the system menu, you can:• View the System Information
•  Set up Parental Controls
•  Change the on-screen 
menu language
•  Set the time
•  Adjust the CEC settings
•  Adjust the Power Indicator 
settings
•  Reset TV Settings & Set up 
Admin Controls
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
SYSTEM
System Information
Menu Language English
Time and Local Settings
Parental Controls
CEC
Power Indicator Off
Reset & Admin
Displaying  System Information
To display a summary of the TV settings:
1 .  Press the MENU button on the remote. The on-screen menu is 
displayed.  
2 .  Use the Arrow buttons on the remote to highlight System  
and press OK. The  SYSTEM menu is displayed.
3 .  Highlight  System Information and press OK.
4 .  Use the Up/Down Arrow buttons to scroll through the system 
information.
5 .  When you are finished reviewing the system information, 
press the EXIT button on the remote.  
						

							5
34
Using the Parental Controls
The TV’s parental controls allow you to prevent the TV from 
displaying certain channels or programs without a password.
Accessing the Parental Controls Menu
To access the Parental Controls menu:
1 . Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight System  
and press OK. The  SYSTEM menu is displayed.
3 .  Use the Arrow buttons on the remote to highlight Parental 
Controls and press OK. 
4 .  Enter your parental passcode. If you have not set a 
passcode, enter the default, 0000. The  PARENTAL CONTROLS 
menu is displayed.
To set a custom parental passcode, see Changing 
the Parental Control Passcode
 on page 35.
Enabling or Disabling Program Ratings
To manage program content according to its rating, you must 
enable the Program Rating feature.
To enable or disable the Program Rating feature:
1 .  From the PARENTAL CONTROLS menu, highlight Locks  and 
press  OK. The  LOCKS menu is displayed.
2 .  Select  On or Off  and press OK.
Locking and Unlocking Channels
When a channel is locked, it will be inaccessible. Locking 
a channel is a good way to prevent children from viewing 
inappropriate material.
To lock or unlock a channel:
1 .  From the PARENTAL CONTROLS menu, highlight Channel 
Locks and press OK. The  CHANNEL LOCKS menu is displayed.
2 .  Highlight the channel you want to lock or unlock and press 
OK.
3 .  When a channel is locked, the Lock  icon appears locked. 
The channel is not accessible unless the parental passcode 
is entered.
4 .  When a channel is unlocked, the Lock  icon appears 
unlocked. The channel is accessible.