Vizio Television E320-B2 Specifications

							1
5
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult 
the information below to find the appropriate mount for your TV 
model:
Installing a TV on a wall requires lifting. To prevent 
injury or damage to the TV, ask someone to help you.
E320-B2
Screw Size: M4
Screw Pitch: 0.70mm
Screw Length: 10mm
Hole Pattern: 100mm (V) x 100mm (H)
Be sure the mount you choose is capable of supporting the 
weight of the TV. After you have determined that you have the 
correct mount for your TV, you can begin the installation.
To install your TV on a wall:
1 . Disconnect any cables connected to your TV.
2 .  Place the TV face-down on a clean, flat, stable surface. 
Be sure the surface is clear of debris that can scratch or 
damage  the TV.
3 .  Remove the base by loosening and removing the screws.
4 .  Attach your TV and wall mount to the wall, carefully following 
the instructions that came with your mount.  
 
Use only with a UL-listed wall mount bracket rated for the 
weight/load of this TV. See 
Appendix B - Specifications for the 
weight of this TV.
WALL MOUNT SCREW LOCATIONS    
						

							2
6
REAR PANEL
Controls and Connections
Optical Audio Out - Connect optical/SPDIF audio device, such as 
home audio receiver.
Stereo Audio Out - Connect RCA audio device, such as sound bar. USB - Connect USB thumb drive to play photos.
HDMI - Connect HDMI device.
REAR PANEL
HDMI - Connect HDMI device. Component/Composite - Connect component or composite device. Coaxial - Connect coaxial cable from cable, satellite, or antenna.  
						

							2
7
SIDE PANEL
SIDE PANEL
POWER - Press and hold to turn TV on or off.
INPUT - Press to  change input source.   
						

							2
8
FRONT PANEL
REMOTE SENSOR & POWER INDICATOR  
When using the remote, aim it directly at this sensor.
The power indicator flashes on when the TV turns on, then goes out after 
several seconds. To keep the power indicator on as long as the TV is on,   
see 
Turning the Power Indicator On or Off on page 37.
FRONT PANEL  
						

							2
9
REMOTE CONTROL
REMOTE CONTROL
INPUT
EXIT
GUIDEBACK
1
4
7
WIDE
MENU
OK
\fOL\fOLCH
CH
3
\b
9
—2
5
8
0
INPUT 
Change the currently-displayed input.
ARROW  
Navigate the on-screen menu.
EXIT 
Close the on-screen menu.
WIDE 
Switch the display mode.
MUTE 
Turn the audio off or on.
BAC K 
Go to the previous on-screen menu. MENU
 
Display the on-screen menu.
DASH
 
Use with number pad to manually 
enter a digital sub-channel. 
 
(For example, 18-4 or 18-5.) CHANNEL UP/DOWN
 
Change the channel. GUIDE
 
Display the info window.
LAST 
Return to the channel last viewed.
NUMBER PAD 
Manually enter a channel.
VOLUME UP/DOWN 
Increase or decrease loudness of  
the audio.OK
 
Select the highlighted menu option.
V BUTTON 
Open the USB photo viewer.
POWER 
Turn TV on or off.            
						

							2
10
Replacing the Batteries
1 . Remove the battery cover.
2 .  Insert two batteries into the remote control. Make sure that 
the (+) and (-) symbols on the batteries match the (+) and 
(-) symbols inside the battery compartment.
3 .  Replace the battery cover.  
						

							3
11
Connecting Your  Devices
CONNECTING A DEVICE
Game Console
Cable/Satellite BoxDVD/Blu-ray Player
Your TV can be used to display output from most devices. 
1 . 
Verify that your device has a video port that matches an 
available port on the TV (HDMI, Component, etc).
2 .  Turn the TV and your device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on. Set the TV’s input to match 
the connection you used (HDMI, Component, etc).
BETTER
COMPONENT CABLE• ANALOG • HD VIDEO (1080i)* • STEREO AUDIO
BEST
HDMI CABLE • DIGITAL 
•  HD VIDEO (1080p)* 
• HD AUDIO
GOOD
AV CABLE • ANALOG 
• VIDEO (480i)* 
• STEREO AUDIO
* Maximum Resolution
BACK  OF TV
BETTER
COAXIAL CABLE• ANALOG • HD VIDEO (1080i)* • STEREO AUDIO     
						

							3
12
COAXIAL CABLE
Coaxial cables are are the traditional way of 
connectiong antennas and cable television signals 
to your TV. Coaxial cables carry both audio and video 
signals through a single connector.
AV CABLE
AV cables (or Composite cables) are the traditional 
way of connecting your devices to your TV. Video 
signals are sent over the yellow connector while audio 
is sent over the red and white connectors.
GOODBETTER
COMPONENT VIDEO
YLR
• HD Video Resolutions up to 1080i
•  Analog Connection
•  Audio and Video Signals
• 
Video Resolutions up to 480i
•  Analog Connection
•  Audio and Video Signals
CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES
COAXIAL CABLE
Coaxial  
						

							3
13
HDMI CABLE
HDMI is the intelligent, all-digital interface that delivers 
both dazzling quality and unmatched ease of use. HDMI 
technology transmits crystal-clear digital video along 
with multi-channel surround audio. HDMI-connected 
devices have the ability to automatically adjust 
themselves for optimal viewing.
COMPONENT CABLE
Component cables are designed to carry high 
definition video signals along with additional 
audio connections. Colors are delivered with color 
information split up three different ways over three 
connectors for video (separated into Red, Blue and 
Green signals) and the left and right audio connectors 
(Red and White).
BETTER
COMPONENT VIDEO
RLPr/Cr Pb/Cb YHDMIHDMI
• HD Video Resolutions up to 1080p
•  HD Audio
•  Digital Connection
•  Audio and Video Signals
• 
HD Video Resolutions up to 1080i
•  Analog Connection
•  Audio and Video Signals
BEST  
						

							3
14
CONNECTING AN AUDIO DEVICE
Home Audio Receiver
VIZIO Sound Bar
Your TV can output sound to an audio device, such as a receiver 
or sound bar. 
1 . 
Verify that your device has an audio port that matches an 
available port on the TV (HDMI, RCA, etc).
2 .  Turn the TV and your audio device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on.
BETTER
OPTICAL/SPDIF CABLE• PCM STREAM • DOLBY DIGITAL 5.1 CHANNEL • DTS 5.1 CHANNEL
BEST
HDMI CABLE• ARC 2-WAY COMMUNICATION • 2.0-5.1 DIGITAL AUDIO • PCM, DTS, DOLBY DIGITAL
GOOD
RCA CABLE• ANALOG STEREO CONNECTION • 2.0 CHANNEL