Vizio Television E320-B1 Specifications

5
25
ADJUSTING THE AUDIO  SETTINGS
To adjust the audio settings:
1 . Press the MENU button on the 
remote. The on-screen menu   
is displayed.
2 .  Use the Arrow buttons on the 
remote to highlight Audio and 
press  OK. The  AUDIO menu   
is displayed.
3 .  Use the Arrow buttons to 
highlight the setting you wish 
to adjust, then press Left/Right 
Arrow buttons to change   
the setting:
•  TV Speakers - Turns the 
built-in speakers on or off.  
 
 
 
 
•  Surround Sound - Surround sound uses DTS...

5
26
Resetting the Audio Settings
To reset the audio settings to the factory default settings:
1 . Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight Audio and 
press  OK. The  AUDIO menu is displayed.
3 .  Use the Arrow buttons to highlight Reset Audio Mode and 
press  OK. The TV displays, “Select Reset to restore factory 
default audio settings.”
4 .  Highlight  Reset and press OK.
5 .  Press the EXIT button on the remote....

5
27
Setting the Auto Power Off Feature
To help save energy, your TV is set by default to turn off after 10 
minutes without a video or audio signal. This feature can be 
deactivated.
To set the Auto Power Off feature:
1 . From the  TIMERS menu, use the Up/Down Arrow buttons on 
the remote to highlight Auto Power Off.
2 .  Use the Left/Right Arrow buttons on the remote to change 
whether the TV will turn off.  If you don’t want the TV to turn off 
when there is no signal, change the setting to Off ....

5
28
SETTING  UP THE TUNER
You can use the TV’s Tuner menu to:• Select a Tuner Input
•  Perform an Auto Channel Scan
•  Perform a Partial Channel Scan
•  Manually Add Channels
•  Select Channels to Skip
•  Select Analog MTS Modes
•  Select Digital Languages
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
TUNER
Tuner Mode                         Antenna
Auto Channel Scan
Partial Channel Search
Add Analog Channel
Skip Channel
Analog Audio...

5
29
Adding New Channels
Occasionally, you may need to add a new range of channels  or 
add a new analog channel. You can do this by using the Partial 
Channel Search and Add Analog Channel options.
To add a range of new channels:
1 . From the  TUNER menu, highlight Partial Channel Search, 
and press OK. The  PARTIAL CHANNEL SEARCH menu is 
displayed.
2 .  Highlight  Scan Mode and select the type of channel you 
are adding: Analog,  Digital, or Analog/Digital.
3 .  Highlight  From Channel and enter the...

5
30
Skipping Channels
After a channel scan is completed, you may find that some 
channels are too weak to watch comfortably. There may also be 
some channels you do not want to view. You can remove these 
channels from the TV’s memory with the Skip Channel feature.
Channels that have been removed with the Skip 
Channel feature can still be viewed if the channel 
is entered using the Number Pad. If you wish to 
completely block a channel from being viewed, use 
the parental controls. See 
Locking and...

5
31
Changing the Digital Audio Language
Some digital over-the-air (free), cable, and satellite channels 
broadcast programs in more than one language. The TV’s Digital 
Audio feature allows you to listen to audio in alternate languages.
Not all programs are broadcast in alternate 
languages. The Digital Audio Language feature only 
works when the program being viewed is being 
broadcast in the language you select.
1 . From  the Tuner  menu, highlight 
Digital Language and press 
OK. T h e  Digital...

5
32
SETTING UP CLOSED CAPTIONING
Your TV can display closed captions for programs that include 
them. Closed captions display a transcription of a program’s 
dialogue.
The Closed Captioning menu only appears when the input is an 
antenna for Over-the-Air signals, cable TV directly from the wall 
(no cable box), or a device with a composite video connection.
To activate or deactivate closed 
captions:
1 . Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons...

5
33
• Background Color - Change the color of the 
background directly behind the text.
•  Background Opacity - Change the transparency of the 
background directly behind the text.
•  Window Color - Change the color of the closed 
captioning box.
•  Window Opacity - Change the opacity of the closed 
captioning box
4 .  When you are satisfied with the appearance of the closed   
captions, press the EXIT button on the remote. Typical choices include:
• Opaque background, transparent window—Only a strip 
of...

5
34
RENAMING DEVICES ON THE INPUT MENU
Inputs can be renamed to make them easier to recognize  on the 
Input menu (see 
Changing the Input Source on page 20). For 
example, if you have a DVD player connected to the Component 
input, you can rename that input to display “DVD Player.”
To change the name of an input:
1 .  Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight Devices  
and press OK. The  DEVICES menu is displayed.
3 ....