Vizio Television E320-B1 Specifications

							5
25
ADJUSTING THE AUDIO  SETTINGS
To adjust the audio settings:
1 . Press the MENU button on the 
remote. The on-screen menu   
is displayed.
2 .  Use the Arrow buttons on the 
remote to highlight Audio and 
press  OK. The  AUDIO menu   
is displayed.
3 .  Use the Arrow buttons to 
highlight the setting you wish 
to adjust, then press Left/Right 
Arrow buttons to change   
the setting:
•  TV Speakers - Turns the 
built-in speakers on or off.  
 
 
 
 
•  Surround Sound - Surround sound uses DTS TruSurround
™ 
to deliver an immersive surround sound experience 
from the TV’s internal speakers. TruSurround completes 
the entertainment experience by providing deep, rich 
bass and by delivering crisp details and clear, intelligible 
dialog. Select On or Off .
•  Volume Leveling - Volume leveling uses DTS TruVolume
™ 
to maintain consistent volume levels during transitions 
between program content, AV formats, and input sources. 
Select  On or Off . In a few cases, volume leveling may 
artificially suppress volume increases, making it difficult 
to hear dialog or flattening sudden noises. If this occurs, 
turn volume leveling off.
•  Balance - Adjusts the loudness of the audio output from 
AUDIO
TV Speakers On
Surround Sound On
Volume Leveling On
Balance 0
Lip Sync 0
Digital Audio Out PCM
Analog Audio Out Fixed
Equalizer Settings
Reset Audio Mode
-+
-+
the left and right speakers.
•  Lip Sync - Adjusts the synchronization between the 
display image and the accompanying audio track.
•  Digital Audio Out - Changes the type of processing for 
HDMI ARC output when connected to a home theater 
audio system. Select PCM or Bitstream.
•  Analog Audio Out - Sets the volume control properties 
for the analog RCA (red/white) connectors when 
connected to a home theater audio system. Select 
Variable to control the external device’s volume from 
the TV’s volume controls, or select Fixed to control the 
external device’s volume from your home theater system 
controls.
•  Equalizer Settings - Adjusts the boost or attenuation 
of different frequencies using either preset or custom 
settings. See 
Changing the Equalizer Settings on page 
26.
•  Reset Audio Mode - Restores the audio settings to the 
factory defaults. See 
Resetting the Audio Settings on 
page 26.
4 .  When you have finished adjusting the audio settings, press 
the  EXIT button on the remote.
You must select Bitstream for audio with more than 
two channels (3.0, 5.0, or 5.1, for example).
When the TV speakers are set to On, DTS signals 
cannot be passed through digital audio outputs. 
Help

VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit  
						

							5
26
Resetting the Audio Settings
To reset the audio settings to the factory default settings:
1 . Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight Audio and 
press  OK. The  AUDIO menu is displayed.
3 .  Use the Arrow buttons to highlight Reset Audio Mode and 
press  OK. The TV displays, “Select Reset to restore factory 
default audio settings.”
4 .  Highlight  Reset and press OK.
5 .  Press the EXIT button on the remote.
Changing the Equalizer Settings
The graphic equalizer has several pre-set modes and allows you 
to create one custom mode.
To select a pre-set audio mode:
1 . 
Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight Audio and 
press  OK. The  AUDIO menu is displayed.
3 .  Use the Arrow buttons to highlight Equalizer Settings and 
press  OK. The Audio Mode and equalizer settings screen 
appears.
4 .  Use the Left and Right Arrow buttons to select an audio 
mode. The equalizer bars change to reflect the mode.
5 .  Press the EXIT button on the remote.
To create, modify, or replace the single custom equalizer setting:
1 .  Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight Audio and 
press  OK. The  AUDIO menu is displayed.
3 .  Use the Arrow buttons to highlight Equalizer Settings and 
press  OK. The Audio Mode and equalizer settings screen 
appears.
4 .  Use the Left and Right Arrow buttons to select any audio 
mode as a starting point.
5 .  Use the Arrow buttons to highlight a frequency and then 
press  OK.
6 .  Use the Up and Down Arrow buttons to adjust the boost 
(up) and attenuation (down) for the frequency.
7 .  Use the Left and Right Arrow buttons to select another 
frequency, if desired, and adjust it.
8 .  Press the EXIT button on the remote.  
						

							5
27
Setting the Auto Power Off Feature
To help save energy, your TV is set by default to turn off after 10 
minutes without a video or audio signal. This feature can be 
deactivated.
To set the Auto Power Off feature:
1 . From the  TIMERS menu, use the Up/Down Arrow buttons on 
the remote to highlight Auto Power Off.
2 .  Use the Left/Right Arrow buttons on the remote to change 
whether the TV will turn off.  If you don’t want the TV to turn off 
when there is no signal, change the setting to Off . Otherwise, 
select  10 minutes.
3 .  When you have finished setting the auto power off time, 
press the EXIT button on the remote.SETTING TIMERS
This TV has several timers to save energy and to turn off when you 
go to sleep.
Setting the Sleep Timer
When activated, the TV’s sleep timer will turn the TV off after a set 
period of time.
1 . Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight Timers and 
press  OK. The TIMERS menu is 
displayed.
3 .  Use the Left/Right Arrow   
buttons on the remote to 
highlight the period of time 
after which you want the TV to 
go to sleep: 30, 60, 90, 120, or 
180 minutes. If you don’t want 
the sleep timer to activate, 
change the setting to Off .
4 .  When you have finished setting 
the sleep timer, press the EXIT  
button on the remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
TIMERS
Sleep Timer                                    Off
Auto Power Off                 10 minutes  
						

							5
28
SETTING  UP THE TUNER
You can use the TV’s Tuner menu to:• Select a Tuner Input
•  Perform an Auto Channel Scan
•  Perform a Partial Channel Scan
•  Manually Add Channels
•  Select Channels to Skip
•  Select Analog MTS Modes
•  Select Digital Languages
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
TUNER
Tuner Mode                         Antenna
Auto Channel Scan
Partial Channel Search
Add Analog Channel
Skip Channel
Analog Audio                          Stereo
Digital Language                   English
Selecting a Tuner Input
Select the type of tuner input you will be using. You can select either 
Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
1 .  From the  TUNER menu, highlight Tuner Mode and press OK. 
The  TUNER MODE menu displays.
2 .  Highlight  Antenna or Cable and press OK. Press EXIT.
Scanning for Channels
Before the TV can detect and display channels and their 
associated information, you must scan for channels. A channel 
scan may also be necessary when the TV has been moved to an 
area where different free-to-air broadcast television channels are 
available.
To perform an Auto Channel Scan:
1 .  From the  TUNER menu, highlight 
Auto Channel Scan, and press 
OK. The  CHANNEL SCAN begins.
2 .  Wait until the channel scan is 
100% complete. Highlight Done  
and press OK.
3 .  Press the EXIT button on the 
remote.
If the channel scan is cancelled,the 
channels that were already 
discovered are retained. A new 
channel scan will clear all channels.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
CHANNEL SCAN
Channels Found
Digital Channels: 0
Analog Channels: 0
13% Complete Cancel
Cancel the channel scan.  
						

							5
29
Adding New Channels
Occasionally, you may need to add a new range of channels  or 
add a new analog channel. You can do this by using the Partial 
Channel Search and Add Analog Channel options.
To add a range of new channels:
1 . From the  TUNER menu, highlight Partial Channel Search, 
and press OK. The  PARTIAL CHANNEL SEARCH menu is 
displayed.
2 .  Highlight  Scan Mode and select the type of channel you 
are adding: Analog,  Digital, or Analog/Digital.
3 .  Highlight  From Channel and enter the channel where 
you want to begin the scan. (Use the Left Arrow  button to 
backspace. Use the Number Pad on the remote to enter the 
channel.)
4 .  Highlight  To Channel and enter the channel where you want 
to end the scan. (Use the Left Arrow  button to backspace. 
Use the Number Pad on the remote to enter the channel.)
5 .  Highlight  Start and press OK. The partial channel search 
begins.
6 .  Wait until the partial channel search is 100% complete. 
Highlight  Done and press OK.
7 .  Press the EXIT button on the remote. To add a single new analog channel:
1 . 
From the  TUNER menu, highlight 
Add Analog Channel  and 
press  OK. The  ADD ANALOG 
CHANNEL  menu is displayed.
2 .  Highlight  Enter Channel # and 
use the Number Pad on the 
remote to enter the number of 
the channel you are adding.
3 .  Highlight  Add Channel and 
press  OK. The TV scans for the 
channel.
4 .  When the TV is done scanning 
for the channel, press the EXIT  
button on the remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
ADD ANALOG CHANNEL
Enter Channel #
Add Channel  
						

							5
30
Skipping Channels
After a channel scan is completed, you may find that some 
channels are too weak to watch comfortably. There may also be 
some channels you do not want to view. You can remove these 
channels from the TV’s memory with the Skip Channel feature.
Channels that have been removed with the Skip 
Channel feature can still be viewed if the channel 
is entered using the Number Pad. If you wish to 
completely block a channel from being viewed, use 
the parental controls. See 
Locking and Unlocking 
Channels
 on page 37.
To remove a channel:
1 .  From the  TUNER menu, highlight 
Skip Channel, and press OK. 
The  SKIP CHANNEL menu is 
displayed.
2 .  For each channel you wish 
to remove, use the Up/Down 
Arrow buttons on the remote 
to highlight the channel and 
press  OK. A  
P appears to the 
right of each channel you 
select.
3 .  When you have selected all 
of the channels you wish to 
remove, press the EXIT button 
on the remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
SKIP CHANNEL
1Test 0
1Test 1
P
1-2Test 2P
2Test 3
2-2Test 4P
2-3Test 5  
						

							5
31
Changing the Digital Audio Language
Some digital over-the-air (free), cable, and satellite channels 
broadcast programs in more than one language. The TV’s Digital 
Audio feature allows you to listen to audio in alternate languages.
Not all programs are broadcast in alternate 
languages. The Digital Audio Language feature only 
works when the program being viewed is being 
broadcast in the language you select.
1 . From  the Tuner  menu, highlight 
Digital Language and press 
OK. T h e  Digital Language menu 
is displayed.
2 .  Select your preferred language: 
English,  Español, or Français. 
Press  OK.
3 .  Press the EXIT button on the 
remote.  
Help
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
DIGITAL LANGUAGE
English
Español
Français
LISTENING TO ALTERNATE AUDIO
Changing the  Analog Audio Language
Some analog over-the-air (free) and cable channels broadcast 
programs in more than one language. The TV’s Analog Audio 
feature allows you to listen to audio in an alternate language 
using Secondary Audio Programming (SAP).
Not all programs are broadcast in SAP. The Analog 
Audio Language feature only works when the 
program being viewed is being broadcast with 
Secondary Audio Programming.
To use the Analog Audio feature:
1 .  From  the Tuner  menu, highlight 
Analog Audio and press OK. 
The Analog Audio menu is 
displayed.
2 .  Select  Stereo,  SAP (secondary 
audio programming), or Mono. 
Press  OK.
3 .  Press the EXIT button on the 
remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
ANALOG AUDIO
StereoSAP
Mono  
						

							5
32
SETTING UP CLOSED CAPTIONING
Your TV can display closed captions for programs that include 
them. Closed captions display a transcription of a program’s 
dialogue.
The Closed Captioning menu only appears when the input is an 
antenna for Over-the-Air signals, cable TV directly from the wall 
(no cable box), or a device with a composite video connection.
To activate or deactivate closed 
captions:
1 . Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight Closed 
Captions and press OK. T h e  
CLOSED CAPTIONS menu is 
displayed.
3 .  Use the Arrow buttons on the 
remote to highlight the type 
of closed captions you wish to 
see:
• Analog Closed Captions for   
analog (NTSC) TV channels.
•  Digital Closed Captions for   
digital (ATSC) TV channels.
4 .  After highlighting the type of 
closed captions you wish to 
see, use the Left/Right Arrow  
buttons on the remote to select 
the caption channel you wish 
to display, then press EXIT.
If the program you are viewing is not being broadcast 
with closed captions, the TV will not display them.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
CLOSED CAPTIONS
Analog Closed Captions           CC1
Digital Closed Captions             CS1
Digital Caption Style             Custom
Changing the Appearance of Digital Closed Captions
Digital closed captions can be displayed according to your 
preference. See the diagram on the next page for an explanation 
of the parts of the closed caption area.
To change the appearance of digital closed captions:
1 .  From the CLOSED CAPTIONS 
menu, use the Arrow buttons 
to highlight Digital Closed 
Captions Style and press OK.
2 .  Use the Left/Right Arrow  
buttons on the remote to select 
Custom. The  DIGITAL CLOSED 
CAPTIONS STYLE menu appears 
as shown.
3 .  Use the Up/Down Arrow buttons 
on the remote to highlight the 
setting you wish to change, 
then use the Left/Right Arrow  
buttons to change the setting:
•  Caption Style - Choose 
As Broadcast to keep 
default settings or Custom  
to manually change each 
setting.
•  Text Style  - Change the 
font used for the closed 
captioning text.
•  Text Size - Make the text larger or smaller.
•  Text Color - Change the color of the text.
•  Text Opacity - Change the transparency of the text.
•  Text Edges - Change the effects at the edges of the text, 
such as raising the edges or adding drop shadows.
•  Text Edges Color - Change the color of the text edge 
effects.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
DIGITAL CAPTION STYLE
Caption StyleCustom
Text StyleAs Broadcast
Text SizeLarge
Text ColorGreen
Text OpacityAs Broadcast
Text EdgesAs Broadcast
Test Edges ColorAs Broadcast
Background ColorBlack
Background OpacityAs Broadcast
Window ColorRed
Window OpacityAs Broadcast  
						

							5
33
• Background Color - Change the color of the 
background directly behind the text.
•  Background Opacity - Change the transparency of the 
background directly behind the text.
•  Window Color - Change the color of the closed 
captioning box.
•  Window Opacity - Change the opacity of the closed 
captioning box
4 .  When you are satisfied with the appearance of the closed   
captions, press the EXIT button on the remote. Typical choices include:
• Opaque background, transparent window—Only a strip 
of background appears behind the text, expanding as 
the text appears. This is the typical "As Broadcast" mode. 
•  Opaque background and window in the same color—
When text appears, the entire line fills with color at once.
In the example below, the closed caption text is green, the 
background is black, and the window is red.
CLOSED CAPTIONS SCREEN LAYOUT
Tex t
WindowBackground
CLOSED CAPTION TEXT SAMPLE   
						

							5
34
RENAMING DEVICES ON THE INPUT MENU
Inputs can be renamed to make them easier to recognize  on the 
Input menu (see 
Changing the Input Source on page 20). For 
example, if you have a DVD player connected to the Component 
input, you can rename that input to display “DVD Player.”
To change the name of an input:
1 .  Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight Devices  
and press OK. The  DEVICES menu is displayed.
3 .  Highlight the input device that you want to rename and 
press  OK.
4 .  To use a preset input name:
a . Highlight the Input Port row and press OK.
b .  Highlight the input name you want to use and press OK.
—or—
To enter a custom name:
a .  Enter your custom name using the on-screen keyboard.
b .  Highlight  OK and press OK.
c .  The Input Name changes to show the custom name that 
you created.
5 .  When you have finished naming your input, press the EXIT  
button on the remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
NAME INPUT
HDMI-1 DVD
DVD_
OK
Cancel
Select the input name from a list 
of common device names (Blu-ray, 
Cable Box, DVD, etc).
abcdefghi
jklmnopqr
stuvwxyz0
123456789
.@#.comSpace
Input Port
Custom Name Input Name