Home > Vizio > Television > Vizio Television E320-B1 Specifications

Vizio Television E320-B1 Specifications

Here you can view all the pages of manual Vizio Television E320-B1 Specifications. The Vizio manuals for Television are available online for free. You can easily download all the documents as PDF.

Page 11

1
5
3 .  Align the base with the neck and tighten three (3) M4 14mm 
screws.
4 .  When you are finished, place the TV on a stable,   
level surface.
To install the base:
1 .  Align the neck piece with the bottom of the TV and slide it 
into the body of the TV as shown.
2 .  Using a Phillips screwdriver, tighten three (3) M4 14mm 
screws into the center of the neck piece to secure it to   
the TV.     

Page 12

1
6
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult 
the information below to find the appropriate mount for your TV 
model:
Installing a TV on a wall requires lifting. To prevent 
injury or damage to the TV, ask someone to help you.
E320-B1
Screw Size: M4
Hole Pattern: 100mm (V) x 100mm (H)
Weight w/o Stand: 10.80 lbs
Be sure the mount you choose is capable of supporting the 
weight of the TV. After you have determined that you have the 
correct mount for your...

Page 13

2
7
REAR PANEL
Controls and Connections
REAR PANEL
Coaxial - Connect coaxial cable from cable, satellite, or antenna.
Optical Audio Out - Connect an optical/SPDIF audio device, such as 
a home audio receiver.Stereo Audio Out - Connect an RCA audio device, such as sound bar.
HDMI - Connect an HDMI device.
Component/Composite - Connect a component or composite device. USB - Connect a USB thumb drive to display photos.
HDMI - Connect an HDMI device.  

Page 14

2
8
SIDE PANEL
SIDE PANEL
Power/Input - Press once to turn on the TV.
Press once to access the Input menu. Press and hold to turn off the TV.   

Page 15

2
9
FRONT PANEL
REMOTE SENSOR & POWER INDICATOR  
When using the remote, aim it directly at this sensor.
The power indicator flashes on when the TV turns on, then goes out after 
several seconds. To keep the power indicator on as long as the TV is on,   
see 
Turning the Power Indicator On or Off on page 39.
FRONT PANEL  

Page 16

2
10
REMOTE CONTROL
REMOTE CONTROL
INPUT
EXIT
GUIDEBACK
1
4
7
WIDE
MENU
OK
\fOL\fOLCH
CH
3
\b
9
—2
5
8
0
INPUT 
Change the currently-displayed input.
ARROW  
Navigate the on-screen menu.
EXIT 
Close the on-screen menu.
WIDE 
Switch the display mode.
MUTE 
Turn the audio off or on.
BAC K 
Go to the previous on-screen menu. MENU
 
Display the on-screen menu.
DASH
 
Use with number pad to manually 
enter a digital sub-channel. 
 
(For example, 18-4 or 18-5.) CHANNEL UP/DOWN
 
Change the channel. GUIDE...

Page 17

2
11
Replacing the Batteries
1 . Remove the battery cover.
2 .  Insert two batteries into the remote control. Make sure that 
the (+) and (-) symbols on the batteries match the (+) and 
(-) symbols inside the battery compartment.
3 .  Replace the battery cover.  

Page 18

3
12
Connecting Your  Devices
CONNECTING A DEVICE
Game Console
Cable/Satellite BoxDVD/Blu-ray Player
Your TV can be used to display output from most devices. 
1 . 
Verify that your device has a video port that matches an 
available port on the TV (HDMI, Component, etc.).
2 .  Turn the TV and your device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on. Set the TV’s input to match 
the connection you used (HDMI, Component, etc.).
BETTER...

Page 19

3
13
COAXIAL CABLE
Coaxial cables are the traditional way of connecting 
antennas and cable television signals to your TV. 
Coaxial cables carry both audio and video signals 
through a single connector.
AV CABLE
AV cables (or Composite cables) are the traditional 
way of connecting your devices to your TV. Video 
signals are sent over the yellow connector while audio 
is sent over the red and white connectors.
GOODBETTER
COMPONENT VIDEO
YLR
• HD Video Resolutions up to 1080i
•  Analog Connection
•  Audio...

Page 20

3
14
HDMI CABLE
HDMI is the intelligent, all-digital interface that delivers 
both dazzling quality and unmatched ease of use. HDMI 
technology transmits crystal-clear digital video along 
with multi-channel surround audio. HDMI-connected 
devices have the ability to automatically adjust 
themselves for optimal viewing.
COMPONENT CABLE
Component cables are designed to carry high 
definition video signals along with additional 
audio connections. Colors are delivered with color 
information split up three...
Start reading Vizio Television E320-B1 Specifications

Related Manuals for Vizio Television E320-B1 Specifications

All Vizio manuals