Vizio E390VL HDTV User Manual

1
4
To install the TV stand:
1 . Place the TV screen-down on a clean, flat surface. To prevent 
scratches or damage to the screen, place the TV on a soft 
surface, such as carpet, rug, or blanket.
2 .  Tighten the thumbscrew into the base.
3 .  Move the TV with attached stand into an upright position 
and place on a flat, level, and stable surface.
4 .  To ensure proper ventilation, leave at least 1” of space 
between the back of the TV and any other objects (walls, 
etc).
HDMI (BEST)RGB (PC) AUDIORGB...

1
5
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult 
the information below to find the appropriate mount for your TV 
model:Installing a TV on a wall requires lifting. To prevent 
injury or damage to the TV, ask someone to help you.
E390VL
Screw Size: M6
Screw Length: 20mm
Screw Pitch: 1.0mm
Hole Pattern: 200mm (V) x 200mm (H)
Be sure the mount you choose is capable of supporting the 
weight of the TV. After you have determined that you have the 
correct mount...

2
6
Controls and Connections
REaR  PanEl
Rear Panel
Coaxial - Connect coaxial cable from cable, 
satellite, or antenna.
Optical Audio Out - Connect optical/SPDIF audio 
device, such as home audio receiver.
Stereo Audio Out - Connect 3.5mm audio cable to 
audio device. HDMI - Connect HDMI device.
PC Audio In  - Connect 3.5mm PC audio cable.
RGB - Connect RGB cable to PC.
Component - Connect component device.
Composite - Connect composite device.  

2
7
Side Panel
SIDE PanEl
POWER - Turn TV off or on.
MENU - Open the on-screen menu.
CHANNEL UP/DOWN - Change the channel.
VOLUME UP/DOWN - Increase or decrease volume level.
INPUT - Change input source.
HDMI - Connect HDMI device.
USB - Connect USB thumb drive to view photo  slideshow.  

2
8
fRonT PanEl
Front Panel
REMOTE SENSOR  
When using the remote, aim it directly at this sensor.   

2
9
REMoTE ConTR ol
Remote Control
InPUT 
Change the currently-displayed input.
aRR oW  
navigate the on-screen menu.ExIT 
Close the on-screen menu. CloSED CaPTIonS 
open the closed caption menu.
a/V ConTR olS 
Control usb photo viewer.
WIDE 
switch the display mode.
MUTE 
turn the audio off or on.
BaCk  
go to the previous on-screen menu. PoWER
 
turn tv on or off.
MEnU 
display the on-screen menu.
Info  
display the info window.
DaSh 
use with number pad to manually enter 
a digital sub-channel. (For...

2
10
Replacing the Batteries
Replacing Batteries
1 .  Remove the battery cover.
2 .  Insert two batteries into the remote control. Make sure that 
the (+) and (-) symbols on the batteries match the (+) and 
(-) symbols inside the battery compartment.
3 .  Replace the battery cover.
•	Use only good quality batteries.
•	 Inserting the batteries incorrectly may result in 
cracking or leakage that may cause a fire or 
result in injury.
•	 Dispose of old or dead batteries in accordance 
with local hazardous...

3
11
Connecting Your Devices
ConnECTInG a DEVICE
CONNECTING A DEVICE
BEST
hDMI CaBlE• DIGITAL 
• HD VIDEO (1080p)* 
• HD AUDIO
GooD
aV CaBlE • ANALOG 
• VIDEO (480i)* 
• STEREO AUDIO
BETTER
CoMPonEnT CaBlE • ANALOG 
• HD VIDEO (1080i)* 
• STEREO AUDIO
* maximum resolution
Game Console
Cable/Satellite Box
DVD/Blu-ray Player
Your TV can be used to display output from most devices. 
1 . 
Verify that your device has a video port that matches an 
available port on the TV (HDMI, Component, etc).
2 .  Turn the...

3
12
CONNECTING A PC
ConnECTInG a PC
RGB Cable (For Video)
3.5mm Cable (For Audio)
Your TV can be used to display output from a personal computer.
To use your TV as a PC display:
1 . 
Connect an RGB cable (not included) to your PC and the 
RGB port on the back of the TV. This cable transmits video. 
2 .  Connect a 3.5mm cable (not included) to your PC and the 
PC Audio In port on the back of the TV. This cable transmits 
audio. 
3 .  Set your PC’s resolution to match the resolution of your TV. 
See...

3
13
ConnECTInG an aUDIo DEVICE
Home Audio Receiver
VIZIO Sound Bar
CONNECTING AUDIO DEVICE
Your TV can output sound to an audio device, such as a receiver 
or sound bar. 
1 . 
Verify that your device has a audio port that matches an 
available port on the TV (Optical, etc).
2 .  Turn the TV and your audio device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on.
3.5mm Cable Optical/SPDIF Cable
GooD
BETTER