Vizio E390VL HDTV User Manual

							1
4
To install the TV stand:
1 . Place the TV screen-down on a clean, flat surface. To prevent 
scratches or damage to the screen, place the TV on a soft 
surface, such as carpet, rug, or blanket.
2 .  Tighten the thumbscrew into the base.
3 .  Move the TV with attached stand into an upright position 
and place on a flat, level, and stable surface.
4 .  To ensure proper ventilation, leave at least 1” of space 
between the back of the TV and any other objects (walls, 
etc).
HDMI (BEST)RGB (PC) AUDIORGB (PC)
R
L AUDIO
Y/V Pr/Cr
Pb/CbCOMPONENT (BETTER)
CABLE / ANTENNA
OPTICALAUDIO OUT
DVT / TV
AUDIO OUTCOMPOSITE (GOOD)
HDMI (BEST)RGB (PC) AUDIORGB (PC)
R
L AUDIO
Y/V Pr/Cr
Pb/CbCOMPONENT (BETTER)
CABLE / ANTENNA
OPTICALAUDIO OUT
DVT / TV
AUDIO OUTCOMPOSITE (GOOD)
Step 2Step 3  
						

							1
5
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult 
the information below to find the appropriate mount for your TV 
model:Installing a TV on a wall requires lifting. To prevent 
injury or damage to the TV, ask someone to help you.
E390VL
Screw Size: M6
Screw Length: 20mm
Screw Pitch: 1.0mm
Hole Pattern: 200mm (V) x 200mm (H)
Be sure the mount you choose is capable of supporting the 
weight of the TV. After you have determined that you have the 
correct mount for your TV, you can begin the installation.
To install yovur TV on a wall:
1 .  Disconnect any cables connected to your TV.
2 .  Place the TV face-down on a clean, flat, stable surface. 
Be sure the surface is clear of debris that can scratch or 
damage  the TV.
3 .  Remove the base by loosening and removing the screws.
4 .  Attach your TV and wall mount to the wall, carefully following 
the instructions that came with your mount.  
 
Use only with a UL-listed wall mount bracket rated for the 
weight/load of this TV. See 
Appendix A - Specifications for 
the weight of this TV.  
						

							2
6
Controls and Connections
REaR  PanEl
Rear Panel
Coaxial - Connect coaxial cable from cable, 
satellite, or antenna.
Optical Audio Out - Connect optical/SPDIF audio 
device, such as home audio receiver.
Stereo Audio Out - Connect 3.5mm audio cable to 
audio device. HDMI - Connect HDMI device.
PC Audio In  - Connect 3.5mm PC audio cable.
RGB - Connect RGB cable to PC.
Component - Connect component device.
Composite - Connect composite device.  
						

							2
7
Side Panel
SIDE PanEl
POWER - Turn TV off or on.
MENU - Open the on-screen menu.
CHANNEL UP/DOWN - Change the channel.
VOLUME UP/DOWN - Increase or decrease volume level.
INPUT - Change input source.
HDMI - Connect HDMI device.
USB - Connect USB thumb drive to view photo  slideshow.  
						

							2
8
fRonT PanEl
Front Panel
REMOTE SENSOR  
When using the remote, aim it directly at this sensor.   
						

							2
9
REMoTE ConTR ol
Remote Control
InPUT 
Change the currently-displayed input.
aRR oW  
navigate the on-screen menu.ExIT 
Close the on-screen menu. CloSED CaPTIonS 
open the closed caption menu.
a/V ConTR olS 
Control usb photo viewer.
WIDE 
switch the display mode.
MUTE 
turn the audio off or on.
BaCk  
go to the previous on-screen menu. PoWER
 
turn tv on or off.
MEnU 
display the on-screen menu.
Info  
display the info window.
DaSh 
use with number pad to manually enter 
a digital sub-channel. (For example, 
18-4 or 18-5.) ChannEl UP/Do Wn 
Change the channel. GUIDE 
display the info window.
laST 
return to the channel last viewed.
nUMBER  PaD 
manually enter a channel.
VolUME UP/Do Wn 
Increase or decrease loudness of the audio. ok 
select the highlighted menu option.
V BUTTon 
open the usb photo viewer.              
						

							2
10
Replacing the Batteries
Replacing Batteries
1 .  Remove the battery cover.
2 .  Insert two batteries into the remote control. Make sure that 
the (+) and (-) symbols on the batteries match the (+) and 
(-) symbols inside the battery compartment.
3 .  Replace the battery cover.
•	Use only good quality batteries.
•	 Inserting the batteries incorrectly may result in 
cracking or leakage that may cause a fire or 
result in injury.
•	 Dispose of old or dead batteries in accordance 
with local hazardous waste regulations.
•	 Keep batteries away from children and pets.  
						

							3
11
Connecting Your Devices
ConnECTInG a DEVICE
CONNECTING A DEVICE
BEST
hDMI CaBlE• DIGITAL 
• HD VIDEO (1080p)* 
• HD AUDIO
GooD
aV CaBlE • ANALOG 
• VIDEO (480i)* 
• STEREO AUDIO
BETTER
CoMPonEnT CaBlE • ANALOG 
• HD VIDEO (1080i)* 
• STEREO AUDIO
* maximum resolution
Game Console
Cable/Satellite Box
DVD/Blu-ray Player
Your TV can be used to display output from most devices. 
1 . 
Verify that your device has a video port that matches an 
available port on the TV (HDMI, Component, etc).
2 .  Turn the TV and your device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on. Set the TV’s input to match 
the connection you used (HDMI-1, HDM1-2, etc).     
						

							3
12
CONNECTING A PC
ConnECTInG a PC
RGB Cable (For Video)
3.5mm Cable (For Audio)
Your TV can be used to display output from a personal computer.
To use your TV as a PC display:
1 . 
Connect an RGB cable (not included) to your PC and the 
RGB port on the back of the TV. This cable transmits video. 
2 .  Connect a 3.5mm cable (not included) to your PC and the 
PC Audio In port on the back of the TV. This cable transmits 
audio. 
3 .  Set your PC’s resolution to match the resolution of your TV. 
See 
Appendix B - Specifications.Personal Computer     
						

							3
13
ConnECTInG an aUDIo DEVICE
Home Audio Receiver
VIZIO Sound Bar
CONNECTING AUDIO DEVICE
Your TV can output sound to an audio device, such as a receiver 
or sound bar. 
1 . 
Verify that your device has a audio port that matches an 
available port on the TV (Optical, etc).
2 .  Turn the TV and your audio device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on.
3.5mm Cable Optical/SPDIF Cable
GooD
BETTER