Vivitek Qumi Q7 User Manual

35
Audio
To adjust the audio settings, press  to enter the Audio sub menu.
ITEMDESCRIPTION
VolumePress the ◄ or ► button to adjust the audio volume.
Mute Press the ◄ or ► button to turn on or off the speaker.  

36
Advanced 1
To adjust the advanced settings, press  to enter the Advanced 1 sub menu.
ITEMDESCRIPTION
LanguagePress the ◄ or ► button to select a different localization menu.
Security Lock Press the ◄ or ► button to enable or disable security lock 
function.
Blank Screen Press the ◄ or ► button to select different color to blank the 
screen.
Splash Logo Press the ◄ or ► button to show logo or not.
Colsed Captioning Press the ◄ or ► button to enable or disable colsed captioning.
Keypad Lock Press the ◄...

37
3D Setting
To adjust the 3D settings, press  to enter the 3D Setting sub menu.
ITEMDESCRIPTION
3DPress the ◄ or ► button to select Off, DLP-Link or IR.
3D Sync Invert Press the ◄ or ► button to turn 3D sync Invert on or off.
3D Format Press the ◄ or ► button to select Frame Sequential,  
Top / Bottom, Side by Side.
2Dto3D Press the ◄ or ► button to enable or disable 2Dto3D function.
2Dto3D Deep Press the ◄ or ► button to select different 2Dto3D deep.  

38
Advanced 2
To adjust the advanced settings, press  to enter the Advanced 2 sub menu.
ITEMDESCRIPTION
Test PatternPress the ◄ or ► button to select different test pattern.
H Image Shift Press the ◄ or ► button to shift the horizontal position.
V Image Shift Press the ◄ or ► button to shift the vertical position.  

39
Settings 2 Menu
To access the Settings 2 menu and adjust the settings, perform the following steps:1.  Enter the OSD menu.
2.  Press the ◄ or ► button to select the  Settings 2 menu.
3.  Press the ▲ or ▼ button to move the cursor up and down in the Settings 2 menu 
and press 
.
4.  Press the ◄ or ► button to change values for each applicable setting.
ITEM DESCRIPTION
Auto SourcePress the ◄ or ► button to enable or disable automatic source 
detection.
No Signal Power Off 
(min) Press the ◄ or ► button...

40
Reset All
To reset all of the menu items to the factory default values (except Language and Security 
Lock), perform the following steps:1.  Enter the OSD menu.
2.  Press the ◄ or ► button to select the  Settings 2 menu.
3.  Press the ▲ or ▼ button to select the  Reset All menu and press 
.  

41
Status
To see the status of the Qumi, perform the following steps:1.  Enter the OSD menu.
2.  Press the ◄ or ► button to select the  Settings 2 menu.
3.  Press the ▲ or ▼ button to select the  Status menu and press 
.
ITEMDESCRIPTION
Active SourceDisplays the activated source.
Video Information Displays resolution/video information for RGB source and color 
standard for Video source.
LED Hours LED use information is displayed (in hours). Eco and Normal 
counters are separated.  

42
Advanced 1
To access the Advanced 1 menu and adjust the settings, perform the following steps:1.  Enter the OSD menu.
2.  Press the ◄ or ► button to select the  Settings 2 menu.
3.  Press the ▲ or ▼ button to select the  Advanced 1 menu and press 
.
4.  Press the ▲ or ▼ button to move the cursor up or down in the Advanced 1 menu.
5.  Press the ◄ or ► button to change values for each applicable setting.
ITEM DESCRIPTION
Menu PositionPress the ◄ or ► button to select different OSD location.
Translucent...

43
Advanced 2
To access the Advanced 2 menu and adjust the settings, perform the following steps:1.  Enter the OSD menu.
2.  Press the ◄ or ► button to select the  Settings 2 menu.
3.  Press the ▲ or ▼ button to select the  Advanced 2 menu and press 
 or ►.
4.  Press the ▲ or ▼ button to move the cursor up or down in the Advanced 2 menu.
5.  Press the ◄ or ► button to change values for each applicable setting.
ITEM DESCRIPTION
Sleep TimerPress the ◄ or ► button to adjust the time for automatically lamp...

44
Source Filter
To adjust the source filter, press  or ► to enter the Source Filter sub menu.
ITEM DESCRIPTION
VGAPress the ◄ or ► button to enable or disable VGA source in auto 
search loop.
Composite Video Press the ◄ or ► button to enable or disable Composite Video 
source in auto search loop.
HDMI 1 / MHL Press the ◄ or ► button to enable or disable HDMI 1 / MHL 
source in auto search loop.
HDMI 2 Press the ◄ or ► button to enable or disable HDMI 2 source in 
auto search loop.
USB Press the ◄ or ►...