Vivitek Qumi Q7 User Manual

							35
Audio
To adjust the audio settings, press  to enter the Audio sub menu.
ITEMDESCRIPTION
VolumePress the ◄ or ► button to adjust the audio volume.
Mute Press the ◄ or ► button to turn on or off the speaker.  
						

							36
Advanced 1
To adjust the advanced settings, press  to enter the Advanced 1 sub menu.
ITEMDESCRIPTION
LanguagePress the ◄ or ► button to select a different localization menu.
Security Lock Press the ◄ or ► button to enable or disable security lock 
function.
Blank Screen Press the ◄ or ► button to select different color to blank the 
screen.
Splash Logo Press the ◄ or ► button to show logo or not.
Colsed Captioning Press the ◄ or ► button to enable or disable colsed captioning.
Keypad Lock Press the ◄ or ► button to enable or disable keypad lock 
function.
3D Setting Press 
 to enter the 3D menu. See 3D Setting on page 37.
Auto Keystone Press the ◄ or ► button to enable or disable automatic keystone.
Note: 
To use the 3D function, the Play Movie in 3D setting found in your player\
 under the 3D Disc 
Menu must be enabled. 3D functionality works when the input source suppo\
rts 120Hz.  
1. The 3D OSD menu item is gray if there is no appropriate 3D source. This\
 is the default setting.  
2. When the projector is connected to an appropriate 3D source, the 3D OSD\
 menu item is 
enabled for selection.  
3. Use 3D glasses to view a 3D image.  
4. You need 3D content from a 3D DVD or 3D media file.  
5. You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection 
feature).  
6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install 
a driver on your PC and connect a USB emitter.  
7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D).  
8. Power on the glasses. Glasses normally have a power on-off switch. Each type of glasses has 
their own configuration instructions. Please follow the configuration instructions that come with 
your glasses to finish the setup process.  
						

							37
3D Setting
To adjust the 3D settings, press  to enter the 3D Setting sub menu.
ITEMDESCRIPTION
3DPress the ◄ or ► button to select Off, DLP-Link or IR.
3D Sync Invert Press the ◄ or ► button to turn 3D sync Invert on or off.
3D Format Press the ◄ or ► button to select Frame Sequential,  
Top / Bottom, Side by Side.
2Dto3D Press the ◄ or ► button to enable or disable 2Dto3D function.
2Dto3D Deep Press the ◄ or ► button to select different 2Dto3D deep.  
						

							38
Advanced 2
To adjust the advanced settings, press  to enter the Advanced 2 sub menu.
ITEMDESCRIPTION
Test PatternPress the ◄ or ► button to select different test pattern.
H Image Shift Press the ◄ or ► button to shift the horizontal position.
V Image Shift Press the ◄ or ► button to shift the vertical position.  
						

							39
Settings 2 Menu
To access the Settings 2 menu and adjust the settings, perform the following steps:1.  Enter the OSD menu.
2.  Press the ◄ or ► button to select the  Settings 2 menu.
3.  Press the ▲ or ▼ button to move the cursor up and down in the Settings 2 menu 
and press 
.
4.  Press the ◄ or ► button to change values for each applicable setting.
ITEM DESCRIPTION
Auto SourcePress the ◄ or ► button to enable or disable automatic source 
detection.
No Signal Power Off 
(min) Press the ◄ or ► button to automatically turn the projector lamp 
off when there is no signal.
Auto Power On Press the ◄ or ► button to enable or disable automatic power on.
LED Mode Press the ◄ or ► button to select the LED mode for higher 
brightness or lower brightness to save LED life.
Reset All Press 
 to reset all items to factory preset values. See Reset All 
on page 40.
Status Press 
 to enter the Status menu. See Status on page 41.
Advanced 1 Press 
 to enter the Advanced 1 menu. See 
Advanced 1 on page 
42.
Advanced 2 Press 
 to enter the Advanced 2 menu. See 
Advanced 2 on page 
43.  
						

							40
Reset All
To reset all of the menu items to the factory default values (except Language and Security 
Lock), perform the following steps:1.  Enter the OSD menu.
2.  Press the ◄ or ► button to select the  Settings 2 menu.
3.  Press the ▲ or ▼ button to select the  Reset All menu and press 
.  
						

							41
Status
To see the status of the Qumi, perform the following steps:1.  Enter the OSD menu.
2.  Press the ◄ or ► button to select the  Settings 2 menu.
3.  Press the ▲ or ▼ button to select the  Status menu and press 
.
ITEMDESCRIPTION
Active SourceDisplays the activated source.
Video Information Displays resolution/video information for RGB source and color 
standard for Video source.
LED Hours LED use information is displayed (in hours). Eco and Normal 
counters are separated.  
						

							42
Advanced 1
To access the Advanced 1 menu and adjust the settings, perform the following steps:1.  Enter the OSD menu.
2.  Press the ◄ or ► button to select the  Settings 2 menu.
3.  Press the ▲ or ▼ button to select the  Advanced 1 menu and press 
.
4.  Press the ▲ or ▼ button to move the cursor up or down in the Advanced 1 menu.
5.  Press the ◄ or ► button to change values for each applicable setting.
ITEM DESCRIPTION
Menu PositionPress the ◄ or ► button to select different OSD location.
Translucent Menu Press the ◄ or ► button to select OSD background translucent 
level.
Low Power Mode Press the ◄ or ► button to enable (
						

							43
Advanced 2
To access the Advanced 2 menu and adjust the settings, perform the following steps:1.  Enter the OSD menu.
2.  Press the ◄ or ► button to select the  Settings 2 menu.
3.  Press the ▲ or ▼ button to select the  Advanced 2 menu and press 
 or ►.
4.  Press the ▲ or ▼ button to move the cursor up or down in the Advanced 2 menu.
5.  Press the ◄ or ► button to change values for each applicable setting.
ITEM DESCRIPTION
Sleep TimerPress the ◄ or ► button to adjust the time for automatically lamp 
off (in minutes).
Source Filter Press 
 or ► to enter the Source Filter menu. See Source Filter 
on page 44.
White Calibration Press 
 or ► to active the white calibration for re-build LED 
sensor data.  
						

							44
Source Filter
To adjust the source filter, press  or ► to enter the Source Filter sub menu.
ITEM DESCRIPTION
VGAPress the ◄ or ► button to enable or disable VGA source in auto 
search loop.
Composite Video Press the ◄ or ► button to enable or disable Composite Video 
source in auto search loop.
HDMI 1 / MHL Press the ◄ or ► button to enable or disable HDMI 1 / MHL 
source in auto search loop.
HDMI 2 Press the ◄ or ► button to enable or disable HDMI 2 source in 
auto search loop.
USB Press the ◄ or ► button to enable or disable USB source in auto 
search loop.