Vivitek Projector H1188 Series User Manual

— 12 — 
Adjusting the Projector Level 
Take note of the following when setting up the projector: 
 The projector table or stand should be level and sturdy. 
 Position the projector so that it is perpendicular to the screen. 
 Ensure the cables are in a safe location. You could trip over them.  
 
To adjust the angle of the picture, turn the tilt-adjuster right or left until the desired 
angle has been achieved. 
 
 
 
   

– 13 – 
Adjusting the vertical image position 
 The Lens Shift function 
can be used to adjust 
the  position of the 
vertically. 
 
 The display position can 
be shifted upward up to 
9% and down to 5% 
elevation of the display. 
 
 
Adjusting the Zoom, Focus and Keystone 
1.  Use the Image-zoom  
control (on the projector 
only) to resize the 
projected image and 
screen size . 
 
2.  Use the Image-focus  
control (on the projector 
only) to sharpen the 
projected image . 
3.  Use the KEYSTONE 
buttons...

— 14 — 
Adjusting the Volume 
1.  Press the Volume +/- 
buttons on the remote 
control.  
The volume control 
appears on the display. 
 
2.  Press the MUTE button 
to turn off the volume. 
(This feature is available 
only on the remote).     

– 15 – 
ON-SCREEN DISPLAY (OSD) MENU SETTINGS 
OSD Menu Controls 
The projector has an OSD that lets you make image adjustments and change various settings.  
Navigating the OSD 
You can use the remote control cursor buttons to navigate and make changes to the OSD.  
 
1. To enter the OSD, press the 
MENU button.  
2. There are six menus. Press 
the cursor ◄► button to 
move through the menus.  
3. Press the cursor ▲▼ button 
to move up and down in a 
menu.  
4. Press ◄► to change values 
for settings....

— 16 — 
Setting the OSD Language 
Set the OSD language to your preference before continuing. 
1. Press the MENU button. Press the cursor ◄► button to navigate to SETUP>>Basic. 
 
2. Press the cursor ▲▼ button until Language is highlighted.  
3. Press the cursor ◄► button until the language you want is selected.  
4. Press the MENU button to close the OSD.   
  

– 17 – 
OSD Menu Overview 
Use the following illustration to quickly find a setting or determine the range for a setting. 
Main Menu  Sub Menu   Settings 
Picture >>Basic  Display Mode    Presentation, Movie, Vivid , Bright, 
Game, User1 
   Brightness    0 ~ 100 
   Contrast    -50 ~ 50 
   Color    -50 ~ 50 
   Tint    -50 ~ 50 
   Sharpness    0 ~ 21 
   Reset Pictures 
Setting 
   Reset current display mode value 
Picture >>Advanced  Color temperature    D65, D75, D83 
   Gamma    1.8 / 2.0 / 2.2 /...

— 18 — 
Main Menu  Sub Menu   Settings 
Setup >> Basic 
 
Language 
 
  
English, Français, Deutsch, Españ ol, 
Portuguê s, 簡体中文, 繁體中文, Italiano, 
Norsk, Svenska, Nederlands, Русский, 
Polski, Suomi, Dansk, 한국어, 日本語 
   Projection    Front Table / Front Ceiling / Rear Table 
/ Rear Ceiling 
   Auto power off    Disable / 5 / 10 / 15 / 20 / 25 / 30min 
   Sleep timer    Disable / 30min / 1hr / 2hr /3hr / 4hr / 
8hr / 12hr 
   Background color    Black / Blue / Purple 
   Menu Setting  Menu Position Center...

– 19 – 
PICTURE>>Basic Menu 
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
PICTURE>>Basic menu. Press the cursor ▲▼ button to move up and down in the 
PICTURE>>Basic menu. Press ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Display Mode Press the cursor ◄► buttons to set the Display Mode. 
Brightness Press the cursor ◄► buttons to adjust the display brightness. 
Contrast Press the cursor ◄► buttons to adjust the display contrast. 
Color 
Press the cursor...

— 20 — 
PICTURE>>Advanced Menu 
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the  
PICTURE>>Advanced menu. Press the cursor ▲▼ button to move up and down in the  
PICTURE>>Advanced menu. Press ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Color Temperature Press the cursor ◄► button to set the Color Temperature. 
Gamma Press the cursor ◄► button to adjust the gamma correction of the display. 
HSG Adjustment Press the ENTER button to enter the HSG Adjustment...

– 21 – 
HSG Adjustment 
Press the ENTER button to enter the HSG Adjustment sub menu.  
 
ITEM DESCRIPTION 
Primary Color Press the ◄► buttons to set the Primary Color. 
Notes: There are six sets (R/ G/ B/ C/ M/ Y) of colors to be customized. 
Hue Press the ◄► buttons to adjust the Hue. 
Saturation Press the ◄► buttons to adjust the Saturation. 
Gain Press the ◄► buttons to adjust the dain.