Vivitek Projector H1188 Series User Manual
Here you can view all the pages of manual Vivitek Projector H1188 Series User Manual. The Vivitek manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
— 22 — VividSettings Press the ENTER button to enter the VividSettings sub menu. ITEM DESCRIPTION VividMotion Press the ◄► buttons to select different MEMC level. VividPeaking Press the ◄► buttons to adjust motion adaptive sharpness enhancement (2D Peaking) value. Flesh Tone Press the ◄► buttons to adjust the display flesh tone.
Page 32
– 23 – DISPLAY Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the DISPLAY menu. Press the cursor ▲▼ button to move up and down in the DISPLAY menu. Press ◄► to change values for settings. ITEM DESCRIPTION Aspect Ratio Press the cursor ◄► button to set the Aspect Ratio. Keystone Press the cursor ◄► button to adjust the Keystone. Overscan Press the cursor ◄► button to adjust the Overscan. PC Detail Adjustment Press the ENTER button to enter the PC Detail...
Page 33
— 24 — PC Detail Adjustment Press the ENTER button to enter the PC Detail Adjustment sub menu. Note: Customizing the settings in PC Detail Adjustment menu is only available when PC input source (analog RGB) is selected. ITEM DESCRIPTION Auto Press the ENTER/AUTO button on the control panel or the ENTER/AUTO button on the remote control to automatically adjust frequency, phase, and position. Frequency Press the ◄► buttons to adjust the A/D sampling number. Phase Press the ◄► buttons to adjust...
Page 34
– 25 – White Balance Press the ENTER button to enter the White Balance sub menu. ITEM DESCRIPTION Red Gain Press the ◄► buttons to adjust the Red Gain. Green Gain Press the ◄► buttons to adjust the Green Gain. Blue Gain Press the ◄► buttons to adjust the Blue Gain. Red Bias Press the ◄► buttons to adjust the Red Bias. Green Bias Press the ◄► buttons to adjust the Green Bias. Blue Bias Press the ◄► buttons to adjust the Blue Bias.
Page 35
— 26 — User Color Temp Press the ENTER button to enter the User Color Temp sub menu. ITEM DESCRIPTION White Gain Red Press the ◄► buttons to adjust the White Gain Red. White Gain Green Press the ◄► buttons to adjust the White Gain Green. White Gain Blue Press the ◄► buttons to adjust the White Gain Blue.
Page 36
– 27 – 3D Setting ITEM DESCRIPTION 3D Mode Press the ◄► buttons to enter and select different 3D mode. 3D Sync Press the ◄► buttons to enter and enable or disable 3D Sync. 3D Sync Invert Press the ◄► buttons to enter and enable or disable 3D Sync Invert. Note: 1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting. 2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is enabled for selection. 3. Use 3D glasses to...
Page 37
— 28 — SETUP>>Basic Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the SETUP>>Basic menu. Press the cursor ▲▼ button to move up and down in the SETUP>>Basic menu. Press ◄► to change values for settings. ITEM DESCRIPTION Language Press the cursor ◄► buttons to select a different localization menu. Projection Press the cursor ◄► buttons to choose from four projection methods. Auto Power Off Press the cursor ◄► buttons to set the Auto Power Off timer. The...
Page 38
– 29 – Menu Settings Press the ENTER button to enter the Menu Settings sub menu. ITEM DESCRIPTION Menu Position Press the ◄► buttons to select from five OSD locations. Menu Display Time Press the ◄► buttons to set the Menu Display timer before the OSD times out. Source Press the ENTER button to enter the Source sub menu. ITEM DESCRIPTION PC Press the ◄► buttons to enable or disable the PC source. HDMI N Press the ◄► buttons to enable or disable the HDMI source. HDMI O Press the ◄► buttons...
Page 39
— 30 — SETUP>>Advanced Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the SETUP>>Advanced menu. Press the cursor ▲▼ button to move up and down in the SETUP>>Advanced menu. ITEM DESCRIPTION Audio Press the ENTER button to enter the Audio sub menu. See Audio on page 31. Lamp Press the ENTER button to enter the Lamp sub menu. See Lamp on page 31. High Altitude Mode Press the cursor ◄► buttons to turn on or off High Altitude Mode. Recommended to turn...
Page 40
– 31 – Audio Press the ENTER button to enter the Audio sub menu. ITEM DESCRIPTION Volume Press the ◄► buttons to adjust the audio Volume. Mute Press the ◄► buttons to turn on or off the speaker. Lamp Press the ENTER button to enter the Lamp sub menu. ITEM DESCRIPTION Lamp Mode Press the ◄► buttons to adjust lamp brightness. Reset Lamp Timer Press the ENTER button to reset the Lamp Hour after the lamp is replaced. Lamp Hour Displays the number of hours the lamp has been in use.