Vivitek Projector D5280U User Manual

 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
PICTURE>>Basic Menu 
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the 
PICTURE>>Basic  menu. Press the cursor  ▲▼ button to move up and down in the 
PICTURE>>Basic  menu. Press ◄► to change values for settings. 
Note: 
Customizing the settings in  PICTURE>>Basic menu is only available in User 1/ 2/ 3 mode. 
 
ITEM DESCRIPTION 
Display Mode  Press the cursor ◄►
 buttons to set the Display Mode.  
(Range: Movie/...

DLP Projector—User’s Manual 
PICTURE>>Advanced Menu 
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the  
PICTURE>>Advanced  menu. Press the cursor  ▲▼ button to move up and down in the  
PICTURE>>Advanced  menu. Press ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Noise Reduction  Press the cursor ◄► button to adjust the Noise Reduction.  
Color Temperature  Press the cursor ◄► button to set the Color Temperature. 
Notes: This function is only available in...

 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
HSG Adjustment 
Press the ENTER  button to enter the  HSG Adjustment sub menu.  
 
ITEM DESCRIPTION 
Primary Color  Press the ◄►
 buttons to set the Primary Color. 
Notes: There are six sets ( R/ G/ B/ C/ M/ Y) of colors to be customized. 
Hue Press  the ◄►  buttons to adjust the Hue. 
Saturation Press  the ◄►  buttons to adjust the Saturation. 
Gain Press  the ◄►  buttons to adjust the Gain. 
 
Note: 
This function is only available when...

DLP Projector—User’s Manual 
DISPLAY Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the 
DISPLAY  menu. Press the cursor  ▲▼ button to move up and down in the  DISPLAY menu.  
Press  ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Aspect Ratio  Press the cursor ◄►
 button to set the Aspect Ratio. 
(Range:  Auto/ 16:10/ 16:9/ 4:3/ Letter Box/ Real) 
Keystone  Press the cursor ◄►
 button to adjust the Keystone. 
Notes: This function is available when the...

 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
PC Detail Adjustment 
Press the ENTER  button to enter the  PC Detail Adjustment  sub menu. 
Note: 
Customizing the settings in  PC Detail Adjustment menu is only available when PC input source 
(analog RGB) is selected. 
 
ITEM DESCRIPTION 
Auto Press the ENTER/AUTO
 button on the control panel or the ENTER/AUTO  button on the 
remote control to automatically adjust frequency, phase, and position. 
Frequency Press  the ◄►  buttons to adjust the A/D...

DLP Projector—User’s Manual 
 SETUP>>Basic Menu  
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the 
SETUP>>Basic  menu. Press the cursor  ▲▼ button to move up and down in the  
SETUP>>Basic menu. Press  ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Language  Press the cursor ◄►
 buttons to select a different localization menu. 
(Range: English/ Danish/ Dutch/ Finnish/ Français/ Deutsch/ Italiano/ Korean/ Norsk/ Polish/ 
Português (Latin American)/ Russian/...

 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
Menu Settings 
Press the ENTER  button to enter the  Menu Settings sub menu. 
 
ITEM DESCRIPTION 
Menu Position  Press the ◄►
 buttons to select from five OSD locations:  
Top-Left/ Top-Right/  Center/ Bottom-Left/ Bottom-Right. 
Menu Display Time  Press the ◄►
 buttons to set the Menu Display timer before the OSD times out. 
(Range: 5sec/ 10sec/  15sec/ 20sec/ 25sec/ 30sec) 
Source 
Press the ENTER  button to enter the  Source sub menu. 
 
ITEM...

DLP Projector—User’s Manual 
Command Control Settings 
Press the ENTER button to enter the  Command Control Settings  sub menu. 
 
ITEM DESCRIPTION 
Control By Press the ◄► buttons to select projector remote command control. (Range:  RS232/ RJ45) 
Network State  Press the ENTER
 button to enter the  Network State sub menu.  
See  Network State  on page 30. 
Projector ID  Press the cursor ◄►
 button to set Projector ID number for projector control by RS232 com-
mand. 
Network State 
 
ITEM DESCRIPTION...

 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
For simplicity and ease of operation, the projector provides diverse networking and remote management 
features. 
The LAN/RJ45 function of the pr ojector through a network, such as remotely manage: Power On/Off, 
Brightness and Contrast settings. Also, projector stat us information, such as: Video-Source, Sound-Mute, 
etc
. 
 
LAN_RJ45 
1.  Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop). 
 
2.  On the PC (Laptop), select  Start →...

DLP Projector—User’s Manual 
3.  Right-click on Local Area Connection, and select Properties. 
 
4. In the  Properties  window, select the  General tab, and select  Internet Protocol (TCP/IP) . 
5. Click  Properties . 
 
6. Click  Use the following IP address  and fill in the IP address and Subnet mask, then click  OK. 
 
 
—  32 —