Vivitek Projector D5280U User Manual

							 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
PICTURE>>Basic Menu 
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the 
PICTURE>>Basic  menu. Press the cursor  ▲▼ button to move up and down in the 
PICTURE>>Basic  menu. Press ◄► to change values for settings. 
Note: 
Customizing the settings in  PICTURE>>Basic menu is only available in User 1/ 2/ 3 mode. 
 
ITEM DESCRIPTION 
Display Mode  Press the cursor ◄►
 buttons to set the Display Mode.  
(Range: Movie/ Bright/ Normal/ User 1/ User 2/ User 3) 
Brightness  Press the cursor ◄► buttons to adjust the display brightness. 
Contrast  Press the cursor ◄► buttons to adjust the display contrast. 
Color  Press the cursor ◄►
 buttons to adjust the video saturation. 
Notes: This function is only available when Component, Video or S-Video input source is  selected. 
Tint  Press the cursor ◄►
 buttons to adjust the video tint/hue. 
Notes: This function is only available when Component, Video or S-Video with NTSC   system input source is selected. 
Sharpness  Press the cursor ◄►
 buttons to adjust the display sharpness. 
Notes: This function is only available when Component, Video or S-Video input source is  selected. 
Flesh Tone  Press the cursor ◄►
 buttons to adjust the display flesh tone. 
Notes: This function is only available when Component, Video or S-Video input source is  selected. 
Reset Picture Settings  Press the ENTER button to reset all settings to default values. 
– 23  –  
						

							DLP Projector—User’s Manual 
PICTURE>>Advanced Menu 
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the  
PICTURE>>Advanced  menu. Press the cursor  ▲▼ button to move up and down in the  
PICTURE>>Advanced  menu. Press ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Noise Reduction  Press the cursor ◄► button to adjust the Noise Reduction.  
Color Temperature  Press the cursor ◄► button to set the Color Temperature. 
Notes: This function is only available in User 1/ 2/ 3 mode. 
Gamma 
Press the cursor ◄► button to adjust the gamma correction of the display. 
HSG Adjustment  Press the ENTER
 button to enter the  HSG Adjustment sub menu.  
See  HSG Adjustment  on page 25. 
Color Space  Press the cursor ◄►
 button to set the Color Space. 
(Range:  Auto/ RGB/ SDTV/ HDTV) 
Notes: This function is only available when HDMI input source is selected. 
—  24 —  
						

							 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
HSG Adjustment 
Press the ENTER  button to enter the  HSG Adjustment sub menu.  
 
ITEM DESCRIPTION 
Primary Color  Press the ◄►
 buttons to set the Primary Color. 
Notes: There are six sets ( R/ G/ B/ C/ M/ Y) of colors to be customized. 
Hue Press  the ◄►  buttons to adjust the Hue. 
Saturation Press  the ◄►  buttons to adjust the Saturation. 
Gain Press  the ◄►  buttons to adjust the Gain. 
 
Note: 
This function is only available when  User1,User2,User3 display mode is selected. 
– 25  –  
						

							DLP Projector—User’s Manual 
DISPLAY Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the 
DISPLAY  menu. Press the cursor  ▲▼ button to move up and down in the  DISPLAY menu.  
Press  ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Aspect Ratio  Press the cursor ◄►
 button to set the Aspect Ratio. 
(Range:  Auto/ 16:10/ 16:9/ 4:3/ Letter Box/ Real) 
Keystone  Press the cursor ◄►
 button to adjust the Keystone. 
Notes: This function is available when the  Auto keystone function is turned off. 
Overscan  Press the cursor ◄► button to adjust the Overscan. 
Digital Zoom Press the cursor ◄► button to adjust the Digital Zoom. 
PC Detail Adjustment  Press the ENTER
 button to enter the  PC Detail Adjustment  sub menu.  
See  PC Detail Adjustment  on page 27. 
—  26 —  
						

							 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
PC Detail Adjustment 
Press the ENTER  button to enter the  PC Detail Adjustment  sub menu. 
Note: 
Customizing the settings in  PC Detail Adjustment menu is only available when PC input source 
(analog RGB) is selected. 
 
ITEM DESCRIPTION 
Auto Press the ENTER/AUTO
 button on the control panel or the ENTER/AUTO  button on the 
remote control to automatically adjust frequency, phase, and position. 
Frequency Press  the ◄►  buttons to adjust the A/D sampling number. 
Phase Press  the ◄►  buttons to adjust the A/D sampling clock. 
Horizontal Position  Press the ◄► buttons to adjust the display position right or left.  
Vertical Position  Press the ◄► buttons to adjust the display position up or down. 
 
Note:  
Some signals may take time to display or may not be displayed correctly. 
If the Auto Adjust operation cannot optimize the PC signal, try to adjust FREQUENCY and 
PHASE manually. 
 
– 27  –  
						

							DLP Projector—User’s Manual 
 SETUP>>Basic Menu  
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the 
SETUP>>Basic  menu. Press the cursor  ▲▼ button to move up and down in the  
SETUP>>Basic menu. Press  ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Language  Press the cursor ◄►
 buttons to select a different localization menu. 
(Range: English/ Danish/ Dutch/ Finnish/ Français/ Deutsch/ Italiano/ Korean/ Norsk/ Polish/ 
Português (Latin American)/ Russian/ Simplified Chinese/ Traditional Chinese/ Spanish/ 
Swedish/ Czech/ Turkish/ Hungarian/ Arabic/ Japanese) 
Splash Logo  Press the cursor ◄►
 buttons to select a different startup screen. 
(Range:  Vivitek/ Blue/ Black) 
Projection  Press the cursor ◄►
 buttons to choose from four projection methods:  
Front Table / Front Ceiling/ Rear Table/ Rear Ceiling. 
Blank Timer   Press the cursor ◄►
 buttons to set the Blank Screen timer. The projected image is automati-
cally restored after the set time. 
(Range:  Disable/ 5 min/ 10 min/ 15 min/ 20 min/ 25 min/ 30 min) 
Auto Power Off  Press the cursor ◄►
 buttons to set the Auto Power Off timer. The projector automatically 
turns off if no input source is detect ed after the preset period of time. 
(Range:  Disable/ 5 min/ 10 min/ 15 min/ 20 min/ 25 min/ 30 min) 
Sleep Timer  Press the cursor ◄►
 buttons to set Sleep timer. The projector automatically turns off after the 
preset period of time.  
(Range:  Disable/ 30 min/ 1hr/ 2hr/ 3hr/ 4hr/ 8hr/ 12hr) 
Background Color   Press the cursor ◄►
 buttons to select the background color when no input source is detected. 
(Range: Purple/ Black/ Blue) 
Menu Settings  Press the ENTER button to enter the  Menu Settings sub menu. See Menu Settings  on page 29.
Source Press  the ENTER  button to enter the  Source sub menu. See Source  on page29. 
Command Control 
Settings  Press the ENTER
 button to enter the  Command Control Settings  sub menu.  
See  Command Control Settings  on page 30. 
—  28 —  
						

							 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
Menu Settings 
Press the ENTER  button to enter the  Menu Settings sub menu. 
 
ITEM DESCRIPTION 
Menu Position  Press the ◄►
 buttons to select from five OSD locations:  
Top-Left/ Top-Right/  Center/ Bottom-Left/ Bottom-Right. 
Menu Display Time  Press the ◄►
 buttons to set the Menu Display timer before the OSD times out. 
(Range: 5sec/ 10sec/  15sec/ 20sec/ 25sec/ 30sec) 
Source 
Press the ENTER  button to enter the  Source sub menu. 
 
ITEM DESCRIPTION 
PC 1 
PC 2  Press the ◄►
 buttons to enable or disable the PC source. 
HDMI   Press the ◄► buttons to enable or disable the HDMI source. 
DisplayPort  Connect a DisplayPort cable to a DisplayPort source 
BNC Press  the ◄►  buttons to enable or disable the BNC source 
Component Press the  ◄► buttons to enable or disable the Component source. 
S-Video Press  the ◄►  buttons to enable or disable the S-Video source. 
Video Press  the ◄►  buttons to enable or disable the Video source. 
Quick Auto Search  Press the ◄►
 buttons to enable or disable Quick Auto Search for available input source. 
Notes: When the desired source is selected, the Qu ick Auto Search function will be turn off. 
– 29  –  
						

							DLP Projector—User’s Manual 
Command Control Settings 
Press the ENTER button to enter the  Command Control Settings  sub menu. 
 
ITEM DESCRIPTION 
Control By Press the ◄► buttons to select projector remote command control. (Range:  RS232/ RJ45) 
Network State  Press the ENTER
 button to enter the  Network State sub menu.  
See  Network State  on page 30. 
Projector ID  Press the cursor ◄►
 button to set Projector ID number for projector control by RS232 com-
mand. 
Network State 
 
ITEM DESCRIPTION 
Network State  Displays the network connection status. 
DHCP  Press 
◄► to turn DHCP On or Off.  
Note:  If you select DHCP Off, complete the IP  Address, Subnet Mask, Gateway, and DNS 
fields. 
Projector IP Address   Enter a valid IP address if DHCP is turned off. 
Subnet Mask  Enter a valid Subnet Mask if DHCP is turned off. 
Default Gateway Displays the default Gateway address on the network. 
DNS Enter a valid DNS name if DHCP is turned off. 
Apply Press  (Enter) / ► to confirm settings. 
—  30 —  
						

							 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
For simplicity and ease of operation, the projector provides diverse networking and remote management 
features. 
The LAN/RJ45 function of the pr ojector through a network, such as remotely manage: Power On/Off, 
Brightness and Contrast settings. Also, projector stat us information, such as: Video-Source, Sound-Mute, 
etc
. 
 
LAN_RJ45 
1.  Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop). 
 
2.  On the PC (Laptop), select  Start → Control  Panel →  Network Connections . 
 
– 31  –  
						

							DLP Projector—User’s Manual 
3.  Right-click on Local Area Connection, and select Properties. 
 
4. In the  Properties  window, select the  General tab, and select  Internet Protocol (TCP/IP) . 
5. Click  Properties . 
 
6. Click  Use the following IP address  and fill in the IP address and Subnet mask, then click  OK. 
 
 
—  32 —