Vivitek Dw864 User Manual

							— 32 — 
Lamp Hour Reset 
 
Please refer to Resetting the Lamp on page 65 to reset the lamp  hour counter. 
 
  
						

							– 33 – 
3D 
 
ITEM DESCRIPTION 
3D Press the cursor  ◄► button  to select different  3D  mode. 
3D  Sync Invert Press the cursor  ◄► button  to enable  or  disable  3D  Sync InvertK 
 
Note: 
1. The  3D OSD  menu  item is gray  if there  is no appropriate  3D source.  This is the default  setting. 
2. W hen  the projector  is connected  to an appropriate  3D source,  the 3D  OSD menu  item is enab led  for 
selection. 
3. Use 3D  glasses to view  a 3D  image. 
4. You need  3D  content from a  3D DVD  or  3D  media  file. 
5. You need  to enab le the  3D source  (some  3D  DVD  content may  have  a 3D on-off  selection  feature). 
6. You need  DLP link  3D  or  IR 3D shutter  glasses. W ith IR 3D  shutter glasses, you  need  to install a 
driver  on  your  PC  and connect  a USB emitter. 
7. The  3D mode  of the  OSD needs  to match the type  of glasses (DLP  link  or IR  3D). 
8. Power  on the glasses. Glasses normally  have  a power  on -off switch.  
Each type  of glasses has their  own  configuration  instructions. Please follow the configuration 
instructions that come with  your  glasses to finish the setup  process. 
 
Note:  
Since different types of glass (DLP link  or IR shutter glass) have their own  setting instructions, 
Please follow  the  guide  to finish the setup process. 
  
						

							— 34 — 
Network 
 
ITEM DESCRIPTION 
Network  State Displays the network  connection  status. 
DHCP 
Press ◄► to turn DHCP  On or  Off.  
Note : If  you select DHCP  Off,  complete  the IP  Address, Subnet  Mask, Gateway,  and 
DNS  fields. 
IP Address  Enter  a valid  IP address  if DHCP  is turned  off. 
Subnet  Mask Enter  a valid  Subnet  Mask if  DHCP  is turned  off. 
Gateway Enter  a valid  Gateway  address  if  DHCP  is turned  off. 
DNS Enter  a valid  DNS  name  if DHCP  is turned  off. 
Apply Press  (Enter)  / ► to confirm  settings. 
   
						

							– 35 – 
For simplicity and ease  of  operation,  the projector  provides  diverse networking  and  remote  management 
features. 
The  LAN/RJ45  function  of the  projector  through  a network,  such as remotely manage:  Power  On/Off, 
Brightness  and  Contrast  settings. Also, projector  status information,  such as: Video-Source,  Sound-Mute, 
etc. 
 
LAN_RJ45 
1. Connect  an  RJ45  cable to RJ45  ports on  the projector  and  the PC (Laptop). 
 
2. On  the PC (Laptop), select Sta rt → Control Pa ne l → Ne tw ork Conne ctions. 
    
						

							— 36 — 
3. Right-click on Loca l Are a  Conne ction, and  select Prope rtie s. 
 
4. In  the Prope rtie s window,  select the Ge ne ra l tab, and  select Inte rne t Protocol  (TCP/IP). 
5. Click Prope rtie s. 
 
6. Click Use   the  follow ing IP a ddre ss and  fill in the  IP address  and  Subnet  mask, then  click OK. 
  
						

							– 37 – 
7. Press the Me nu button on  the projector. 
8. Select Insta lla tion II →Adva nce d→Ne tw ork. 
9. After getting  into Ne tw ork, input  the following: 
 DHCP:  Off 
 IP Address: 10.10.10.10 
 Subnet  Mask: 255.255.255.0 
 Gateway:  0.0.0.0 
 DNS  Server:  0.0.0.0 
10. Press  (Enter)  / ► to confirm settings. 
Open  a web  browser  
(for  example,  Microsoft Internet  Explorer with Adobe  Flash  Player 9.0 or  higher). 
 
11. In  the Address  bar, input  the IP  address: 10.10.10.10. 
12. Press  (Enter)  / ►. 
The  projector  is setup for  remote  management.  The  LAN/RJ45 function  displays as follows. 
    
						

							— 38 — 
 
CATEGORY ITEM INPUT-LENGTH 
Crestron  Control 
IP Address 14 
IP ID 3 
Port 5 
Projector 
Projector  Name 10 
Location 10 
Assigned  To 10 
Network  Configuration 
DHCP  (Enabled) (N/A) 
IP Address 15 
Subnet  Mask 15 
Default  Gateway 15 
DNS  Server 15 
User  Password 
Enabled (N/A) 
New  Password 15 
Confirm 15 
Admin  Password 
Enabled (N/A) 
New  Password 15 
Confirm 15 
 
For more information, please visit http://www.crestron.com. 
  
						

							– 39 – 
Factory Reset 
Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the Factory 
Re se t sub menu and press  (Enter) / ► to reset all the menu items to the factory default values 
(except Language and Security Lock). 
 
Status 
Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the  
Installation II sub menu and press  (Enter) / ► to enter the Status sub menu. 
     
ITEM DESCRIPTION 
Active  Source Display the  activated  source. 
Video  Information Displays resolution/video  information  for  RGB  source  and  color standard  for  Video 
source. 
Lamp  Hours Lamp  hour  used  information  is displayed. ( Std. and Boost ) 
    
						

							— 40 — 
MEDIA OVERVIEW 
Features 
The Multi-Media software is designed to provide exceptional display performance from a USB  drive, 
the projector’s internal memory or network (LAN/WiFi)  connection. The plug-and-play USB feature 
allows  you to project content without needing a PC.  Additionally, you can transfer files to the 
projector’s on-board memory storage for greater portability. 
Media  Menu 
The Multi-Media utility allows  for the display of the following through your desktop: 
 Display movies 
 Play audio files 
 View  photos 
 Display documents  
  
						

							— 41 — 
Ver.：1 
MENU SETTINGS 
Media 
The media player makes it convenient and easy to play audio, video, images and view  documents by 
directly inserting a USB  device into the projector or by accessing the projector’s internal memory. 
 
ITEM DESCRIPTION 
Photo Allows you to display  photos and  provides  slideshow  functionality. 
Supported  formats:  JPEG, JPG,  and  BMP 
Movie Allows you to play movie  files. 
Supported  formats:  AVI, MKV, TS,  DAT,  VOD, MPG, MPEG, MOV, MP4, 
and  W MV. 
Music Allows you to play audio  files. 
Supported  formats:  MP1, MP2, MP3, W MA, OGG, ADPCM-W AV,  PCM-
W AV, and  AAC. 
Office  Viewer Allows you to display  document  files. 
Supported  formats:  Microsoft® W ord  97-2007  (DOC),  PowerPoint  97-2007 
(PPT),  and  Excel 97-2007  (XLS);  Adobe® Acrobat  Reader  (PDF); text files 
(TXT).