Home > Vivitek > Projector > Vivitek D803w 3d Projector User Manual

Vivitek D803w 3d Projector User Manual

Here you can view all the pages of manual Vivitek D803w 3d Projector User Manual. The Vivitek manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 11

 
 
  DLP Projector—User’s Manual 
Top view—On-screen Display (OSD) buttons and LEDs 
1
2
3
4
5 9 6
7
8
1
0
11
12 
ITEM LABEL DESCRIPTION SEE 
PAGE: 
1.  MENU 
Opens and exits OSD menus 16 
2.  ▲ (Up cursor) /  
Keystone+  Navigates and changes settings in the OSD 
Quick Menu – For Keystone 
3.  SOURCE 
Enter the Source menu 
4.  ◄ (Left cursor) /  
Volume-  Navigates and changes settings in the OSD 
Quick Menu – For Volume 
16 
5.  Enter 
Enter or confirm highlighted OSD menu item 
6.  AUTO Optimizes...

Page 12

DLP Projector—User’s Manual 
 Rear view 
Warning: 
As a safety precaution, disconnect all power to the projector and connecting devices before making 
connections. 
 
12369
12
47
10
13
5
8
11 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  AC IN 
Connect the POWER cable 10 
2.  S-VIDEO   Connect the S-VIDEO cable from a video device 
3.  VIDEO IN 
Connect the COMPOSITE cable from a video device  
4.  HDMI 1 Connect the HDMI cable from a HDMI device 
5.  HDMI 2 Connect the HDMI cable from a HDMI device 
6....

Page 13

 
 
  DLP Projector—User’s Manual 
Bottom view 
 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  Ceiling support holes 
Contact your dealer for information on mounting the projector on a ceiling 
2.  Tilt adjustor  Rotate adjuster lever to adjust angle position.  14 
 
Note: 
When installing, ensure that you us e only UL Listed ceiling mounts. 
For ceiling installations, use approved mounting har dware and M4 screws with a maximum screw 
depth of 12 mm (0.47 inch).  
The construction of the ceiling mount must be...

Page 14

DLP Projector—User’s Manual 
Remote Control Parts  
 
  
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  IR transmitter Transmits signals to projector 
2.  Status LED  Lights when the remote control is used 
3.  Laser Press to operate the on-screen pointer 
4.  Up Up arrow when connected through USB to a PC 
5.  Right  Right arrow when connected through USB to a PC 
6.  Down  Down arrow when connected through USB to a PC 
7.  Page Down  Page down when connected through USB to a PC 
8.  Up cursor  
9.  Right cursor...

Page 15

 
 
  DLP Projector—User’s Manual 
–
 7 –  
ITEM LABEL DESCRIPTION SEE PAGE: 
12.  Mute  Mutes the built-in speaker 
13.  Zoom+  Zoom in  
14.  Zoom- Zoom  out 
15.  Freeze  Freeze/unfreezes the on-screen picture 
16.  Blank Makes the screen blank 
17.  Source Detects the input device 
18.  Auto Auto adjustment for phase, tracking, size, position 
19.  Menu  Opens the OSD  16 
20.  Status  Opens the OSD Status menu (the menu only opens when an 
input device is detected) 33 
21.  Keystone top/bottom...

Page 16

DLP Projector—User’s Manual 
Inserting the Remote Control Batteries 
1.  Remove the battery compartment cover 
by sliding the cover in the direction of 
the arrow. 
 
2.  Insert the battery with the positive side 
facing up. 
 
3.  Replace the cover. 
 
 
Caution: 
1. Only use AAA batteries (Alkaline batteries are recommended). 
 
2. Dispose of used batteries accordi ng to local ordinance regulations.  
 
3. Remove the batteries when not usi ng the projector for prolonged periods. 
 
 
 
 
 
— 8 —  

Page 17

 
 
  DLP Projector—User’s Manual 
–
 9 –  
Important: 
1. Avoid using the projector with bright fluoresc ent lighting turned on. Certain high-frequency fluo-
rescent lights can disrupt remote control operation. 
 
2. Be sure nothing obstructs the path between the re mote control and the projector. If the path be-
tween the remote control and the projector is obstructed, you can bounce the signal off certain 
reflective surfaces such as projector screens. 
 
3. The buttons and keys on the projector have...

Page 18

DLP Projector—User’s Manual 
— 10 — 
SETUP AND OPERATION 
Starting and Shutting  down the Projector 
 
1.  Connect the power cord to the projector. 
Connect the other end to a wall outlet. 
The 
 POWER  LED on the projector 
light. 
2.  Turn on the connected devices.  
3.  Ensure the POWER LED not a flashing. 
Then press the 
  POWER  button to 
turn on the projector.  
 
The projector splash screen displays and 
connected devices are detected. 
 
See  Setting an Access Password 
(Security Lock)  on page...

Page 19

 
 
  DLP Projector—User’s Manual 
5.  When the “Power Off? /Press Power
 
again” message appears, press the 
POWER  button. The projector turns 
off. 
 
Caution: 
1. Be sure to remove the lens  cap before starting projector.  
2. Do not unplug the power cord until the POWER LED stops flashing–indicating the projector has 
cooled down. 
 
 
– 11  –  

Page 20

DLP Projector—User’s Manual 
Setting an Access Password (Security Lock) 
You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector. 
When enabled, the password must be entered after you power on the projector. (See  Navigating the 
OSD  on page  16 and Setting the OSD Language  on page 17 for help on using OSD menus.) 
Important: 
Keep the password in a safe place.  Without the password, you will not be able to use the projector. 
If you lose the password,...
Start reading Vivitek D803w 3d Projector User Manual

Related Manuals for Vivitek D803w 3d Projector User Manual

All Vivitek manuals