Vivitek D803w 3d Projector User Manual

 
 
  DLP Projector—User’s Manual 
5.  You can use the cursor buttons 
▲▼◄► 
either on keypad or IR remote control for 
password entry. You can use any 
combination including the same arrow five 
times, but not less than five. 
Press the cursor buttons in any order to set 
the password. Push the  MENU button to 
exit the  dialog box. 
 
 
6.  The password confirm menu appears when 
user presses the power-on key in case the 
Security Lock  is enabled.  
Enter the password in the order you set it 
at step...

DLP Projector—User’s Manual 
Adjusting the Projector Level 
Take note of the following when setting up the projector: 
•  The projector table or stand should be level and sturdy. 
•   Position the projector so that it is perpendicular to the screen. 
•   Ensure the cables are in a safe location. You could trip over them.  
 
To adjust the angle of the picture, turn  the tilt-adjuster right or left until the 
desired angle has been achieved. 
 
 
 
 
—  14 —  

 
 
  DLP Projector—User’s Manual 
Adjusting the Zoom, Focus and Keystone 
1.  Use the 
Image-zoom   
control (on the projector 
only) to resize the pro-
jected image and screen 
size 
. 
2.  Use the  Image-focus   
control (on the projector 
only) to sharpen the pro-
jected image 
.  
3.  Use the  KEYSTONE  
buttons the remote control 
to correct image-trapezoid 
(wider top or bottom) ef-
fect. 
 
4.  The keystone control  
appears on the display. 
Adjusting the Volume 
 
1.  Press the  Volume +/-...

DLP Projector—User’s Manual 
— 16 — 
ON-SCREEN DISPLAY (OSD) MENU SETTINGS 
OSD Menu Controls 
The projector has an OSD that lets you ma ke image adjustments and change various settings.  
Navigating the OSD 
You can use the remote contro l cursor buttons to navigate and make changes to the OSD.  
2
1
1 2
3
4
56
 
1.  To enter the OSD, press the 
MENU button.  
2.  There are five menus. Press  the cursor  ◄► button to 
move through the menus.  
3. Press the cursor  ▲▼ button 
to move up and down in a...

 
 
  DLP Projector—User’s Manual 
Setting the OSD Language 
Set the OSD language to your pr
eference before continuing. 
1.  Press the  MENU button. Press the cursor  ◄► button to navigate to Installation I. 
 
2.  Press the cursor  ▲▼ button until  Language is highlighted.  
 
3.  Press the cursor  ◄► button until the language you want is highlighted.  
4.   Press the  MENU button twice to close the OSD.   
 
–  17  –  

DLP Projector—User’s Manual 
OSD Menu Overview 
Use the following illustration to quickly find a setting or determine the range for a setting. 
 
 
 
 
—  18 —  

 
 
  DLP Projector—User’s Manual 
OSD Sub-Menu Overview 
 
 
–  19  –  

DLP Projector—User’s Manual 
Image Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the  Image 
Menu. Press the cursor  ▲▼ button to move up and down in the  Image menu. Press  ◄► to change 
values for settings. 
 
ITEM DESCRIPTION 
Display Mode  Press the cursor ◄► button to set the Display Mode.  
Brilliant Color  Press the cursor ◄► button to adjust the Brilliant Color value. 
Brightness  Press the cursor ◄► button to adjust the display brightness. 
Contrast...

 
 
  DLP Projector—User’s Manual 
Advanced Feature 
Press the Menu button to open the 
OSD menu. Press  ◄► to move to the  Image menu. Press  ▼▲ 
to move to the  Advanced menu and then press  Enter or ►. Press  ▼▲ to move up and down in the 
Advanced  menu. 
 
ITEM DESCRIPTION 
Color Space  
Press the cursor ◄► button to adjust the color space.  
Color Temperature  
Press the cursor ◄► button to adjust the color temperature.  
Color Manager   Press  (Enter) / 
► to enter the color manager menu. See page...

DLP Projector—User’s Manual 
Color Manager 
Press  (Enter) / ► to enter the  Color Manager  sub menu.  
 
ITEM DESCRIPTION 
Red  Select to enter the Red Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Green  Select to enter the Green Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Blue  Select to enter the Blue Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Cyan  Select to enter the Cyan Color Manager....