Vivitar Vivicam 3788xi User Manual

 35 12.4 How to set up the auto power off time, camera preset at 5 min.
1. Turn on the camera.
2. Press the menu button; enter the camera
original set-up menu.
3. Use the up or down key of 4 direction control
button, enter the Auto off menu bar.
4. Use the left or right key of 4 direction control
button, select the Auto power off time you hoped.
5. Press the OK button to confirm.
6. Press the MENU button to return the
state.



preview
13. Install software and download picture
13.1 Installation of the...

 36 Step1: Put provide disc into CD room, Application will run automatically (or you
may click on CD Room icon then double click on autorun . Exe File to run
setup program)
Step2: Click Ulead Photo Explorer 8 SE Basic then display below diagram.  

 37 Step3: Select language , click next
Step4: Confirm installation, click next  

 38
Step5: Type in serial number (provide in package), click next
Step6: Select installation path, click next  

 39 Step7: Select installation item, click next
Step8: Confirm installation path, click next  

 40
Step9: Select country, click next
Step10: Click next  

 Step12: Installation complete, select reboot PC or not, program can be used
after PC is rebooted.
41 Step11: Select installation items, click next  

 42
13.2 Download picture
Power ON your camera. Connect the camera with the computer, you can
d the photos to the computer, or you can copy the documents you
card of camera, so you can communicate with other users,
letthecameraasaUdisk.
Some OS first connect with the camera, maybe need special set-up.
Note : If camera is not ON, your PC will not recognize the camera asaUdisk.
13.3 Install camera and software under Windows 98 system
Because Windows 98 dont sustain the Mass Storage of Microsoft, so if you...

 43 13.4 How to install driver under Windows 98:
1. Insert he attached software disk into CD-ROM driver;
2. Insert the USB cable into the USB port of computer;
3. After confirming the camera has turned on, insert the USB cable into the USB
port of camera;
4. The system of computer management will identify the camera, according to
every indicator, you can complete the installation. Driver on X:\DRIVER\ V1.0 ;
( X: as the driver of computer CD);
5. The computer identify the camera as one new equipment
When...

 44 Before connect the camera with the computer, please confirm the camera
has turned on; before pull out the camera, and please confirm that the camera has
turned off.
1. Insert the USB cable into the USB port of computer;
2. After confirming the camera has turned on, insert the USB cable into the USB
of camera;
3. The system of computer management will identify the camera automatically.
4. The computer identify the camera as one new equipment
When you first connect the camera with the computer,...